Jump to content
SAU Community

Recommended Posts

can anyone with a 34 GTR please confirm for me if the following plug should be plugged into anything, my mechanic seems to think the 02 sensors are fine, he thinks the cause is the oil in the intake pipe getting on the AFM causing it to not read properly and to fix this i need to change the turbos out............... im not to sure what to make of that tbh

post-83784-0-45280900-1351547577_thumb.jpg

Is the car missing or is it just a boost problem?

if its AFM it should be running like shit and missing here and there i would have thought?

if its just not boosting sounds like a leak someone? maybe in the inlet manifold or something if its still registering boost?...

im not mechanic, just thoughts..

also if alot of oil is around the AFM.. could mean new turbos.. leak on the inside somewhere?...

If your talking about the plug near the twin turbo pipes yes it should be plugged in. Its either one of your AFM plugs or o2 sensors plugs.

If one of Your AFMS isn't plugged in, then this would explain your preiodic boost.

A little bit of oil residue in your pipes is normal - any running/pooling oil isn't and is a sign your turbos seals are shagged.

AFM's do funny things - particualry if there on the way out (i.e. speratic voltage reading). Down low they aren't really doing much, up high on the other hand....

Edited by wedge_r34gtr

AFM's do funny things - particualry if there on the way out (i.e. speratic voltage reading). Down low they aren't really doing much, up high on the other hand....

Mine did a funny thing............................................................................................................................................. It went in the bin and i laughed! :laugh:

Mine did a funny thing............................................................................................................................................. It went in the bin and i laughed! :laugh:

yea my car runs much better without them too.. but i did still leave them attached to the engine!

Mine did a funny thing............................................................................................................................................. It went in the bin and i laughed! :laugh:

LMFAO THIS GUY BAHAHAHAH

Yeh i was like dafuq is this plug for?????? the oil is all the way to the airbox, my mechanic changed the plugs cleaned the AFM and it boosted and ripped then like 40km later it stopped boosting again, it misses as it hits boost and boost does not come on but the MFD is reading boost to .9 bar :woot: so its all spooling and shiz. i have 2 plugs that are taped togeather behind the twin turbo pipe and 1 is plugged in and 1 is not.

Well mine is suposed to be a farking specialist who has worked on these many times....... Team K Kustoms did the work the motor runs realy well the build is great on it even without it boosting properly it still has shit loads of power, im waiting on a call back from him atm, my main issue is the 20L of fuel it used to do 75km on the way to work.....

i might try unplugging the AFM and see if it runs without them and comes on boost, after he cleaned them and changed the plugs yesterday it went like a rocket, he thinks the turbos may be spitting oil back up the intake pipes and coating them in shit so they are not reading correctly.

Edited by T4NK

yea see what your guy says...

i cant imagine it would run too well unplugging the AFMs...

Does it have an aftermaket ecu? was it tunned after the build? sounds like it is running very rich....

yea see what your guy says...

i cant imagine it would run too well unplugging the AFMs...

Does it have an aftermaket ecu? was it tunned after the build? sounds like it is running very rich....

stock ecu, not sure how much u can tune a stock ecu.... well if it will come on boost with the AFM off then i know thats the issue and i just have to work out why all this oil is in the pipes

yea cant tune stock 34r ecus.. mine had a custom chip installed onit that was very rare that could be tuned, but there arent really any people who tune it anymore so its pretty useless.. ive got a haltech running via MAP now.. much better!

yea a large amount of oil sounds bad.. maybe check pipes on the other side to see if there is more up near the inlet etc?..

The soldering joins on my Afm f**ked up when I cleaned it. Can't remember what happened though... Not it either wouldn't start or revs were bouncing all over I can't remember. But as Joel said it could do funny things when on boost because more air more volts and boom.

I would only be touching what your mechanic says dude. If you f**k something it's bye bye warranty.

ATM it's his job to fix it not yours

The soldering joins on my Afm f**ked up when I cleaned it. Can't remember what happened though... Not it either wouldn't start or revs were bouncing all over I can't remember. But as Joel said it could do funny things when on boost because more air more volts and boom.

I would only be touching what your mechanic says dude. If you f**k something it's bye bye warranty.

ATM it's his job to fix it not yours

Yeh he told me to give the pipes a clean and the AFM to with the spray can cleaner, at lucn im going to get some paper towels and open the pipe and give it a wipe down around the AFM i dont have the tools to get to the one under the airbox, might have to park the car up at home and get the train for the rest of the week.

yea my car runs much better without them too.. but i did still leave them attached to the engine!

Proven 6% better flow when you gut them. DONT GUT WORKING MAF's THOUGH!!!!

This pic lets you see the plug better btw.

Follow the lead - where does it go? it's definatly o2 or MAF though and the other end should be around that location somewhere.

Did someone say dash 7s??

Just keep modifying until it's fixed IMO :)

This man nailed it

If in doubt MOAR boost! :woot:

The answer to everthing in life. More boost.

If in doubt - 30+psi and RWD is the answer.

Edited by wedge_r34gtr

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • G'day all, I have drilled and tapped the hole for the relocation of the timing belt tensioner. That was straight forward. I'm unsure if I need to also put another hole for the smaller stud that the spring behind the tensioner catches on (this is how it seems to work in its original spot). Or do you not use the spring behind it and just torque it down? Thanks in advance, I did a search but couldn't find anything related and it doesn't mention it in the rb30det sau guide.
    • Hi All,  just thought I would provide an update as I know smooth (Matt) was on this forum from 2003.    my brother Matthew passed away end of may 2024 at the age of 41 from liver failure. I am not sure how many of his original team krazy friends are still on here or active but thought it reasonable to let the forum know.    if you have any photos or pictures it would be great if you could share them.    it took me a while to work out he was active on here.    thanks so much 
    • Hi All,  just thought I would provide an update as I know smooth (Matt) was on this forum from 2003.    my brother Matthew passed away end of may 2024 at the age of 41 from liver failure. I am not sure how many of his original team krazy friends are still on here or active but thought it reasonable to let the forum know.    if you have any photos or pictures it would be great if you could share them.    it took me a while to work out he was active on here.    thanks so much   
    • 😜 hopefully we get this instead of a new R36 GTR due to recent financial problems at Nissan. Nismo to sell a complete kit with RB26 and driveline. All starts making sense (ok maybe not) once the Nissan Leaf's (Leaves?) with stuffed EV motors/batteries hit the market cheap
    • Hi guys , have had allot of time for SAU and has helped me out heaps in the past so I thought I would give it a go , I have my QM1 white NUR for sale 1 of 156 examples built by Nissan. Serious personal messages please if interested and details will be provided , asking 500k 
×
×
  • Create New...