Jump to content
SAU Community

Recommended Posts

Beni supras are f**kin gay go to the supra forums

I can't wait to proove you guys wrong once I eventually save enough to buy a Supra haha.

ive got a 34R thinking of getting a 911 GT2 and you suggest a supra?....

what type of response were you expecting benji? haha

Lol, yeah but not just any Supra though, its Smokey's RB26 Supra which was made famous in Option dvd's etc.

If you like 911 and like track then go buy a 911 GT3 Cup car. They aren't as expensive as you might think, quite easy to maintain, and I don't think there is an easier way to lap a couple seconds off V8 supercar pace.

Supra- overweight and made for wealthy businessmen.

Supras only weigh about 20kg heavier than R33 GTR/R34 GTR.

You can easily minimise the weight of them.

Plus they were pretty successful in the JGTC series in Japan.

Orido "The Rodeo King" pilots a 500hp Supra for his daily driver.

Supra_AD08.15544.jpg

Really?...

i thought a GT3 was a club/race version of the carrera and the GT2 was a club/race version of the Turbo.

The turbo being far quicker than a carrera, i would only assume a GT2 would be far quicker than a GT3.

I thought the body setup between the GT2 and 3 would be similar, but the GT2 has the bigger rear end and wheels and more power etc...

I dont know heaps about the the GT3, but thats just my thoughts.. may need to do some more research ha

Ah, your missing what I've said all along. Gt3 CUP car. It's the factory made race car to compete in the various one make series round the world. They make a road going version of the gt3, but the race version is obviously more hardcore. Go to my105 and look up gt3 cup cars. Obviously it's race only, can't be road registered. There are 996 and 997 versions, and you can pick one up cheaper than the Gt2. It's a trailer to track car, but they are the reason wtac bans rear engine cars, otherwise they'd win everything.

ahh right ok..

yea thats fair enough, not looking for an all out track car though. more just a fun weekend car that would see the track here and there..

and as road going ones go, i believe, in the 996 range anyways, the gt2 is faster than the gt3, but not hugely. but i like the idea and styling of the gt2 over the gt3 (always loved turbo cars).

Really??????!!!!!!!!!!!

I'll keep my fancy Datsun over a fancy VW thanks

HA yea..

Have a soft spot for 911s... And the one I'm thinking of i see as great value for a gt2.. I don't think I could sell the gtr though, so maybe just put off buying a house.... Again.... And have both haha

haha its the same weight as a gtr but its rwd? and its faster?? makes no sense.

no one cares about your supra your going to buy benji in 20 years when you finish uni, well all hve r35s by then, gtfo

hahaha ant buy a farkin house first ya knob!

HA yea..

Have a soft spot for 911s... And the one I'm thinking of i see as great value for a gt2.. I don't think I could sell the gtr though, so maybe just put off buying a house.... Again.... And have both haha

That works but wouldn't the misuses be upset about that

haha its the same weight as a gtr but its rwd? and its faster?? makes no sense.

no one cares about your supra your going to buy benji in 20 years when you finish uni, well all hve r35s by then, gtfo

hahaha ant buy a farkin house first ya knob!

I bet Benji goes on Supra forums and says how great his S15 is.

Actually Ant get house first and VW later

Okay....I am getting excitement quivers...

(Similar to the video below)

Why?

Well because the rear pads arrived today from the UK

soo brakes are going in tomorrow!!!!

(RDA Slotted Rotors, EBC greenstuff pads, New hardware kits, new silicone caliper hoses).

=D

Okay....I am getting excitement quivers...

Why?

Well because the rear pads arrived today from the UK

soo brakes are going in tomorrow!!!!

(RDA Slotted Rotors, EBC greenstuff pads, New hardware kits, new silicone caliper hoses).

=D

Why the f**k would you order pads from the UK when you can get them local?

Good stuff benji, but i would throw the silicon brake line hoses in the bin. I beleive heat in the brake area will be to high and will potentially cause the hoses to soften - there only rated to ~100deg

Braided lines or stock rubber in that area.

Edited by wedge_r34gtr

Why the f**k would you order pads from the UK when you can get them local?

They must have been out of stock in Aus....

Either that or they were cheaper from the UK (as thats where theyre made)....

I didn't order them haha.

Good stuff benji, but i would throw the silicon brake line hoses in the bin. I beleive heat in the brake area will be to high and will potentially cause the hoses to soften - there only rated to ~100deg

Braided lines or stock rubber in that area.

Thanks!

Yeah, not sure if theyre silicone...I think maybe theyre just rubber, not 100% sure.

I didn't get the order organised for the brakes.

Good stuff benji, but i would throw the silicon brake line hoses in the bin. I beleive heat in the brake area will be to high and will potentially cause the hoses to soften - there only rated to ~100deg

Braided lines or stock rubber in that area.

Having read this post for your own safety and everyone else's do NOT use the silicon hoses

Having read this post for your own safety and everyone else's do NOT use the silicon hoses

Yeah, I think I must of got mixed up with the silicone hoses thing...I assume they'd just be rubber.

Not even sure whether they make silicone hoses for calipers..(dont think they do)

So I'll find out tomorrow.

Hey Matt

Got your message and have passed it on

Thunderbirds are go fr Thursday

Thanks man, appreciate it!!!!

Benji real cars fit Pads and Rotors..... Wtf is a hardware kit? Are you fitting a bench vice to your control arm?

Thanks!

Yeah, not sure if theyre silicone...I think maybe theyre just rubber, not 100% sure.

I didn't get the order organised for the brakes.

Didn't know if you just ordered off the shelf silicon hose line or a kit...but yeah... never heard of anyone using silicon hose for brake lines.

Edited by wedge_r34gtr

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • It only looks tidy, as most of the stuff that was on the whole back wall, is now in the trailer to go to the tip, or has been shoved in my 2.2x2.4m "Spare parts room", and now I can't get to anything in there Ha ha ha I could definitely do with a bit more space, but I'd just end up with your problems I'm going to enclose the car port beside the garage, and move a lot of stuff into it I think. OR... It will be setup as a fabrication area, and the main garage will have parts storage in it. I'm not sure yet... Need some pictures of that big shed you've got with the bikes and Skyline in
    • No. I think it's gone. 😭 I think you can get body coloured ones on eBay so I think I'll get one of those... Or just hang a red ribbon from the hole and whack a TOW sticker next to it.
    • Can't say I've had a bad experience with one on my car, then again it only gets washed once or twice a year... The wheels on the other hand, get a good spray often due to my shitty dusty pads.
    • @MBS206 thats pretty neat and tidy to me!  I'll get a photo of mine when I'm out there next. It might require multiple photos to understand the scale of the atrocities though... In total I have 4 sheds of varying sizes and layouts. Main shed is 14x8, second shed is 3x8, third shed is 11x2.5, fourth shed is around 6x4.  All are pretty much full.   The main goal of my cleaning tsunami is to make the main shed predominantly car and motorbikes only. Second shed is my metal fab room (2 x bench grinders, drill press, bench belt sander, metal band saw, scrap metal storage and some of my garden tools.  3rd shed is more bigger garden stuff, storage for engine crane, jack stands, concrete grinder, concrete mixer, air compressor lives there, and it now has two 2mx2m pallet racking shelves with itemised boxes holding building stuff, electrical stuff, plumbing stuff, etc, etc.  The 4th shed is Ryobi electric ride on mower, mini boom sprayer, ancient Kubota tractor, more garden stuff!  I have got a lot of shit....  Then there's the pool house (8mx4m) and the pool pump shed (4mx4m).  I built all of the sheds over the 11 years we've been here.  The main shed was a Ranbuild kit, the rest are all custom made to fit the areas available. Building the main shed taught me a LOT as I had no idea about building anything prior to that!  I've still got one more in me. It will be my man cave which I poured the extra concrete for way back when I poured the concrete for the main shed. The idea is the Skyline will be a centre piece of the main cave once (if...) it's finished.  I told my now 14 year old son yesterday that I will 100% drive him to his year 10 formal in 2 years. Still a long way off but at least I now have a date to work towards! 🤣
    • Modern oils are amazing. Add tyres to that as well.
×
×
  • Create New...