Jump to content
SAU Community

Recommended Posts

found a bike tweety matt :)!!!!!

http://www.gumtree.com.au/s-ad/newcastle-region/motorcycles/2012-ninja-250r-special-edition/1011680618

he replied to my want to buy add saying 5k and i said i cant go over 4k but ill let him know if i change my mind and he said it needs to go asap so i said 4500 and he said yes! hes dropping it at my house tomorrow!!!

lets get these licenses chook! hahaha so pumped!!!

really want to come but the skyline is way too sick to come out. it sounds like a subaru until it warms up and then it backfires to the point where i got pulled over and severly warned. and my power steering needs new fluid and im too poor for that. maybe next time.

really want to come but the skyline is way too sick to come out. it sounds like a subaru until it warms up and then it backfires to the point where i got pulled over and severly warned. and my power steering needs new fluid and im too poor for that. maybe next time.

Doesn't sound good

You checked plugs and coil packs yet?

it all started after i pulled the injectors out to check them. they need replacing (plastic bit on ones cracked) and yeah ignition is all fine, its a fuel issue. not including air as ive replaced the oily air filter and cleaned out as much junk as i can.

Hey guys, im new to SAU. Finally got my track 33 in a road cruising condition. Looking to get more involved with you guys from around the newy area. Ill keep an eye out for your next meet and tag along.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • This piece is obscenely discontinued. I honestly hate the frameless window design because the rubber gets stressed and the guides as well every time you open and close the door.
    • I wouldn't be concerned at all, other than to suggest having them flow tested when you receive them to confirm they are reasonably similar, and then put the highest to lowest flowing ones in cylinder 6,1,5,2,4,3
    • I’m only posting this cause I thought I had seen a bad review on these somewhere before. Any feedback? Would you guys recommend that if I do buy these I send em to RC to have em checked before installing. Or any other suggestions?   https://www.ebay.com/itm/114009965865?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=JDl-15yLQ8C&sssrc=4429486&ssuid=QTzlFXB1S-S&var=&widget_ver=artemis&media=COPY
    • They see me rollin' they hatin'....... Took me most of the day to make the necessary mods to the mounts to make them fit the car.  Fortunately I was able to just use the mounts that came with the rotisserie. The rear ones are really secure, the front I feel i might reinforce a bit more as it doesn't seem like enough attachment to the vehicle. I'm sure it's fine but better to be safe than (extremely...) sorry.  I drilled and tapped thread into additional M12 holes to each car mount where it attaches to the rotisserie as an extra fail-safe. Without them the side to side movement is just restricted by the allen head pinch bolts, nothing actually goes though the beam. Does now! I still need to adjust the rotisserie to get the car centred in terms of centre of gravity. If it's too high or too low relative to the rotational centre line of the car, it will be like a turtle and roll onto its back or as it currently sits, I dont think I'd be able to rotate it as it sits as it needs to lift the whole car up as it rotates. Ain't happening... I'm going to be nervous as hell the first time I go to spin it on its side...    
×
×
  • Create New...