Jump to content
SAU Community

Recommended Posts

thought it might be worth a mention, got some walkie talkies from supercheap the other day that have a 7km range, if anyone else is keen to get a set they are on sale at autobarn for $89.

only round the house, they seem pretty good.

pretty keen to test them on the road.

can probably leave one at jarrads house and see if there is any problem transmitting to there from mine haha..

I do want! No gate tho, too lazy to unplumb it lol

So ill have to call you or get details for the Sunday man!

Picked up the car this arvo and asked the guy if you can enter on the day and he said yeah but costs an extra $10 and if no spots are available then no luck.

If you want you can pre enter and sort all the paperwork out on the day

If you want to know more ring John Collins on 49 611 600 as he knows all

Just incase no one knows yet. Me ant and a few others are going to putty road north side on Sunday to scout for our next big cruise. Let us know in here or by pm if your keen to make sure you get the details (hasn't been arranged yet)

Just incase no one knows yet. Me ant and a few others are going to putty road north side on Sunday to scout for our next big cruise. Let us know in here or by pm if your keen to make sure you get the details (hasn't been arranged yet)

Tim is interested too.....

Ill be there if my nugget is home, just gotta get down and get it tomorrow...

PICS OF HARNESS's!!!!!!

PICS OF HARNESS's!!!!!!

FYP

I have 2 in the car now ill snap some pics at lunch, i will have to feed them into the seat as i have the shoulders straps sitting on the back seat and the waist ones hidden under the seat, the mounting points are hte bolt for the rear seat buckle, replace the bolt with an eye bolt, Lower seat belt bolt on each side for 1 waist strap and the other can clip onto the seat rail after u unscrew a bolt to give it room then s crew it back in and its locked in.

Pics as requested.

On the pic with the seat out, the 2 plugs i have circled you can pull up (just a plastic cap) and screw eye bolts in, on the passenger side i had to use this as the seat belt buckle bolt was in so tight my woman hands (i work in IT) could not get it out, on the drivers side i replaced the buckle bolt with an eye bolt. Replaceing the bolt would be the preferd way to do it as when you sit on the back seat you get an eye bolt in the ass cheak.

post-83784-0-13281400-1357863449_thumb.jpg

post-83784-0-39978200-1357863456_thumb.jpg

post-83784-0-46343400-1357863470_thumb.jpg

post-83784-0-11240800-1357863482_thumb.jpg

post-83784-0-07557400-1357863487_thumb.jpg

post-83784-0-40107600-1357863497_thumb.jpg

post-83784-0-64768200-1357863503_thumb.jpg

post-83784-0-85435700-1357863508_thumb.jpg

post-83784-0-06554200-1357863573_thumb.jpg

post-83784-0-14429200-1357864308_thumb.jpg

Edited by T4NK

Sweet well have a bit of a crowd! Who's Tim??

So far we got

Me ant Ben mat benji Ben(xd) and Tim?

Him is Tim ---> http://www.skylinesaustralia.com/forums/topic/413072-tims-n15-sss-pulsar-with-a-twist-neo-vvl/

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Yeah, all the crude is used for fuels and petrochem feedstocks (pesticides, many other chemicals, etc etc). But increasingly over the last few decades, much of the petrochem synthessis has started with methane because NG has been cheaper than oil, cleaner and easier and more consistent to work with, etc etc etc. So it's really had to say what the fraction either way is. Suffice to say - the direct fuels fraction is not insigificant. Heavy transport uses excruciatingly large amounts. Diesel is wasted in jet heaters in North American garages and workshops, thrown down drill holes in quarries, pissed all over the wall to provide electricity to certain outback communities, etc etc. Obviously road transport, and our pet project, recreational consumption camouflaged as road transport, is a smaller fraction of the total liquid HC consumption again. If you're talking aboust Aussie cars' contribution to the absolute total CO2 production of the country, then of course our share of the cubic mile of coal that is used for power generation, metallurgy, etc adds up to a big chunk. Then there is the consumption of timber. Did you know that the production of silicon metal, for example, is done in Australia by using hardwood? And f**king lots and lots and lots of hardwood at that. Until recently, it was f**king jarrah! There are many such sneaky contributors to CO2 production in industry and farming. NG is used in massive quantities in Australia, for power gen, for running huge water pumps (like, 1-2MW sized caterpillar V16 engines running flat out pumping water) for places like mine sites and minerals/metals refineries. And there are just a huge number of those sort of things going on quietly in the background. So NG use is a big fraction of total CO2 production here. I mean, shit, I personally design burners that are used in furnaces here in Oz that use multiple MW of gas all day every day. The largest such that I've done (not here in Oz) was rated to 150MW. One. Single. Gas burner. In a cement clinker kiln. There are thousands of such things out there in the world. There are double digits of them just here in Oz. (OK< just barely double digits now that a lot of them have shut - and they are all <100MW). But it's all the same to me. People in the car world (like this forum's users) would like to think that you only have to create an industrial capability to replace the fuel that they will be using in 10 years time, and imagine that everyone else will be driving EVs. And while the latter part of that is largely true, the liquid HC fuel industry as a whole is so much more massive than the bit used for cars, that there will be no commercial pressure to produce "renewable" "synthetic" fuels just for cars, when 100x that much would still be being burnt straight from the well. You have to replace it all, or you're not doing what is required. And then you get back to my massive numbers. People don't handle massive numbers at all well. Once you get past about 7 or 8 zeros, it becomes meaningless for most people.
    • @GTSBoy out of the cubic mile of crude oil we burn each year, I wonder how much of that is actually used for providing petrol and diesel.   From memory the figure for cars in Australia, is that they only add up to about 2 to 3% of our CO2 production. Which means something else here is burning a shit tonne of stuff to make CO2, and we're not really straight up burning oil everywhere, so our CO2 production is coming from elsewhere too.   Also we should totally just run thermal energy from deep in the ground. That way we can start to cool the inside of the planet and reverse global warming (PS, this last paragraph is a total piss take)
    • As somebody who works in the energy sector and lives in a subzero climate, i'm convinced EV's will never be the bulk of our transport.  EV battery and vehicle companies over here have been going bankrupt on a weekly basis the last year. 
    • With all the rust on those R32s, how can it even support all the extra weight requirements. Probably end up handling as well as a 1990s Ford Falcon Taxi.
    • Yes...but look at the numbers. There is a tiny tiny fraction of the number of Joules available, compared to what is used/needed. Just because things are "possible" doesn't make them meaningful.
×
×
  • Create New...