Jump to content
SAU Community

Recommended Posts

Sometime in the future when everyone thinks there cars are 'pretty' enough for a shoot, lets arrange it for sure, the more the merrier and everyone gets free awesome pics!

That 34gttr is definitely standard or near standard rb25, I heard him take off and it sounds and gos like a standard rb25 with exhaust and filter. Rb26s sound a bit less gurgly/burbly standard and more refined. (personally not a fan of the rb26 exhaust note unless its single turbo or has equal length front pipe for twins).

Drifting around in the wet in a public place is stupid and would have to be so much less controlled than skidding around in the dry (Which is just as bad in a public place). Dont know why people do it, arent they scared or worried they could spin out and smash their car into a power pole, write it off and look like a complete idiot to every one even more than they already appear to be... not to mention perhaps harm themselves.

XUB-222 be his plate, a silver r33 gts that looks a bit worst for wear.

Might go on the cruise, cant bring my r33 though it would have to be my peugeot. We will see if im working or not!

because all the kids are very experienced race car drifters from wayching fast and furious :P

ive always felt the same way. if you wanna do that do somewhere away from innocent people ..

cool man :) you may have to stay up the back haha but stoll should have a fun day :) be good to put face to name

good. spent all day painting my house though :S

hows the gtr going?

So you are getting plenty of practice for when you help do mine then. :)

Or you can help with the new one.

Signed the contracts and paid deposit for a house yesterday

Just gots to wait for contracts etc now

would really like and need one of these but refuse to spend anything over 50 bucks haha.

saw one second hand for that that I should have jumped on :(

think itd be easy to dodgy one up from a old intake throttle body?

http://www.ebay.com.au/itm/APEXi-EXHAUST-CONTROL-VALVE-61mm-JDM-MITSUBISHI-EVO-IV-VIII-155-A022-/140984342653?pt=AU_Car_Parts_Accessories&hash=item20d352587d

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Hi all. Been a while but things are moving along. I just have something that I am wondering about. Since I will use OEM turbo oil pumbing, I got myself a new bolt, the one that goes into the engine block oil feed. As I recall (and see visually) this bolt comes restricted with I think a 1.7mm hole? Not quite sure but it was something around that size. The turbos have 1mm restrictor bolts installed, as necessary due to ball bearings and my higher oil pressures. Can I now just use that OEM bolt with the 1.7mm hole in for the engine block or will this actually be too much oil flow restriction and I have to drill it out first? In my head it would make sense for the bolt to be at least 2mm wide as both turbos take "1mm of oil flow". Do let me know if my logic is flawed here, I just want to make sure I don't kill my turbo bearings with too little oil. Don't know if I can trust the saying I read somewhere that ball bearing turbos essentially only need an oil mist
    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
    • Yeeeppp, been following a lot of the testing on the latest Xona stuff and there are some mental results.  He also went over 1000hp @ 4 hubs on his Mainline with a XRE6364S (63mm) which was also well into the 20psi range before 4000rpm on a 2.5. Crazy stuff. Fwiw the XRE5964S is basically the modern equivalent of their old HTA3582 - would drive nicely enough on an RB25 or 26, but proven capable of a huge amount of power if you want to spicy with rpm tho even at sane boost levels will make stout numbers 
×
×
  • Create New...