Jump to content
SAU Community

Recommended Posts

I will keep an eye on any beers (if its an open invite :) )

My car is off to Nathan @ Newcastle Dyno tomorrow for a tune and boost controller! Not expecting numbers much different than standard but hoping to get a mid range improvement.

Get mine back from Nathan tommorrow, am so looking forward to it, 2 weeks without it. Had a few issues that he's now fixed and also set the boost controller. Will post how it drives tomorrow. :woot:

When are yous guys going to have another R chassis circle jerk again....i mean meet/cruise and make all of us other people in "not real skylines" and other models feel singled out and unwelcome?

Because im keen for that sh*t!

When are yous guys going to have another R chassis circle jerk again....i mean meet/cruise and make all of us other people in "not real skylines" and other models feel singled out and unwelcome?

Because im keen for that sh*t!

Then set a time and place and see who turns up

Or get over yourself and stop holding a grudge

Hey all, just moved to newcastle ad i am after a decent auto-elec. If anyone has any recommendations and/or warnings that would be great, cheers.

Hi

What work do you need done?

Can't really recommend anyone apart from Nathan at Newcastle Dyno but if its a simple thing I'm sure someone knows how to do it

Hi

What work do you need done?

Can't really recommend anyone apart from Nathan at Newcastle Dyno but if its a simple thing I'm sure someone knows how to do it

My power windows in my R32 are not working after an RB25 swap. I have tried fixing them but haven't got anywhere. Also my dash cluster is not working.

hey guys, havent been on in a while. garage should be started to be built on Saturday if martin ever delivers my stuff! :)

Awesome news mate! Mine is slowly getting setup too -

IMG_7433_zps1419e7c3.jpg

Looks good matt.

where and how much are those shelving worth? ive got some crappy wooden ones in mine atm that were there when i bought it.. want to clean it up and minismise the amount of shevling for more room.

also would really like to install a door onit as it only has the 3 roller doors atm..

Looks good matt.

where and how much are those shelving worth? ive got some crappy wooden ones in mine atm that were there when i bought it.. want to clean it up and minismise the amount of shevling for more room.

also would really like to install a door onit as it only has the 3 roller doors atm..

Ummm you can get them from Office City over near Islington i think it is... Can get all shapes and sizes! They have an ebay store too which actually lists a lot of the pricing!

Will be a power wire not hooked up somewhere then

You can try tracing it yourself or ring around the lecos and see who sounds good

I really hope it is, as its a 5 minute fix, but i pretty sure its not. I have spent 3-4 hours tracing wires to try and find it and got nowhere.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Ok glad you clarified on the frenchy’s options , I was worried about if my oem hoses would fit the new compressor or not if I just bought the bracket/compressor kit ,  didn’t realize they also sold a larger full conversion kit. Hmm may just go oem in that case then to make it easy only because I plan to sell this car to upgrade to a 32 GTR or 34 GTT.
    • Right, here's a video of the basic operation at least.  This is what you can expect day to day when you turn the car on and it boots from standby.  The only thing from a media point of view I haven't gotten working is for it to autoplay plexamp when it turns on from standby (it works from cold boot) but that's more of a plexamp problem as it will autoplay other music players.  Also attached is my one stray cable.  It's part of the screen's wiring adapters but there's just nowhere for it to go in my car.  I've just now done a bit of research and found a matching port on a 2010-2014 head unit with BOSE.  Mine has no BOSE so that's that case pretty much closed I think.  Plugging in the Infiniti AC panel basically did nothing for me, so that's a dead end as well.  Next port of call is to mess with this CANBUS module and see what I can find from it.  I found this resource containing the DBC files for a 2010+ G37 : https://github.com/icecube45/Dash_InfinitiG37/blob/master/InfinitiG37.dbc I'll now have something to go from when I try to extract my CANBUS data so I can see if the HVAC Mode, Fan Speed, Temperature, etc. match and also the gear shifter position.  It's a pretty big assumption that it's just mismatched CAN signals but considering all the devices in the CAN network are talking to each other (AC can be fully adjusted just with no info on screen) it might be a safe one.  I will report back WhatsApp Video 2025-02-26 at 12.49.10.mp4
    • Thanks for that Paul.  Do you think if I posted a picture you'd be able to remember where it went? 
    • Sorry Duncan, I didn't get a notification for the replies.  Thanks for responding!  It's a full Android device, but does allow you to use CarPlay/AA as well.  This is the one I bought from NaviRS on AliExpress: https://www.aliexpress.com/item/1005006368602668.html?spm=a2g0o.order_list.order_list_main.111.59aa1802JDzQ0E - the 2K 8G-256G CAM variant but it seems to have gone up by £170 since I bought it!  My purchase was £307.14.   It's not the fastest thing in the world but performs perfectly adequately.  It stays on standby unless I disconnect the battery and let it power down, then it's just a fairly standard Android bootup time from cold.  The DSP Equaliser is very nice and made the standard stereo system sound pretty decent compared to the stock screen.  Perhaps I can take a video of it when I get a sec. It *allegedly* supports the reverse camera, but I'm yet to get that working.  It has options for reverse cam (a camera unit can be bought separately) or 360 cameras (also bought separately).  To be fair it doesn't seem to detect that the shifter was put into reverse but I'm working on a theory about this as well.  At the moment I'm going without which is a bit annoying considering the car is an absolute canal barge but so far I haven't caused any damage I'll grab a picture of the wire I'm missing later today when I can get outside.  My theory, by the by, is that not only is the head unit different, but the CANBUS network has different signals for the different years.  I think this because I have a spare AC panel from a newer Infiniti G37 (as opposed to my Nissan panel) which wouldn't control anything except the volume when I had it wired up with the stock system.  I'm going to throw it back in and see if the screen will respond to it.  I've just ordered an arduino CANBUS module so I can have a look at the signals going around the car and see if I can spot anything.  I'm thinking if I can work out what it's expecting vs what it's getting I might be able to translate and relay the signal back but so far just a theory anyway. I also found this on my travels, so far the only one that specifically matches my car: https://www.aliexpress.com/item/1005002822934280.html?spm=a2g0s.imconversation.0.0.33433e5fgttovi If you look at the picture of the before, it has the card reader slot, and the picture of the head unit is exactly the same as the one pictured in my original post.  I asked if they sell the cables separately but sadly they won't.  I didn't want to just buy this one because it's a super old Android version and only dual core - likely slow as hell. 
    • As above, you did refill the coolant and burp the system before running it again didn't you?
×
×
  • Create New...