Jump to content
SAU Community

Recommended Posts

Located on the sunshine coast

Specs:

Series 2 RB25DET Engine with only 70,000K's (plugs + coil packs included)

Nismo lightweight flywheel

Exedy heavy duty clutch only 5000k's old

Engine + Clutch + ECU - $1500

Please note: The water pump was cracked due to the incident so it will need to be replaced.

Gear box is on ebay to highest bidder

Click here ------------> RB25DET Gearbox

Rota 18 x 9.5 Alloy Wheels + Tyres - $SOLD

Custom 3" turbo back exhaust system with Stainless dump pipe, bored out cat, mandrel bends, custom made muffler. Low resonance and noise at cruising speeds, but loud when you floor it - $400

HKS Hiper D Coil overs - $600

New brake master cylinder with overhauled calipers all round, new pads and rotors, only 5000k's old - $Pending

Front and Rear strut braces - Offers

Immaculate interior - Offers

Greddy Profec B-spec II Electronic boost controller - $200

FET Automatic Turbo Timer - $50

Customer fibreglass subwoofer enclosure - $SOLD

Pod filter with Cold air box - $50

All prices are negotiable!

All items are sold AS IS, no warranties or returns

All other parts on the car are available for sale, just message me and let me know what you are after. I can post small items, but larger items will be collection only, unless you organise your own courier. If you need any pictures of anything just give me a shout

The engine has been tuned to run 7 - 10PSI, never over boosted, never revved beyond 2000rpm until completely warm, car had been a personal project and was 99% complete before it was crashed into, so i never got a chance to see what it could really do.

post-91782-0-98683500-1339661051_thumb.jpg

post-91782-0-88810400-1339661073_thumb.jpg

post-91782-0-67833400-1339661092_thumb.jpg

post-91782-0-56979500-1339661113_thumb.jpg

post-91782-0-95690000-1339661133_thumb.jpg

post-91782-0-32511600-1339661155_thumb.jpg

post-91782-0-34609500-1339661179_thumb.jpg

post-91782-0-74184400-1339661200_thumb.jpg

post-91782-0-83794900-1339661322_thumb.jpg

post-91782-0-73156500-1339662184_thumb.jpg

post-91782-0-78688300-1339662197_thumb.jpg

post-91782-0-24770400-1339662206_thumb.png

post-91782-0-09156300-1339662215_thumb.png

post-91782-0-33058800-1339662234_thumb.png

post-91782-0-13310700-1339662243_thumb.png

Edited by Smaz
  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/402553-wrecking-1995-r33-gtst/
Share on other sites

  • 1 month later...
  • 4 weeks later...

Some parts are still available but it wont let me edit this post, so there is a new one!

http://www.skylinesaustralia.com/forums/topic/409489-r33-rb25det-bits-and-pieces-series-15/

  • 2 months later...

Some parts are still available but it wont let me edit this post, so there is a new one!

http://www.skylinesaustralia.com/forums/topic/409489-r33-rb25det-bits-and-pieces-series-15/

Wat kinda condition are the coil overs in??

  • 3 weeks later...


  • Similar Content

  • Latest Posts

    • Coming home late at night and driving past the police is the only reason i need one haha And yeh, definitley needs a switch to quickly enable it, dont have time to be getting my phone, opening an app, waiting for it to update etc before being able to make the change
    • Because it is financially convenient for them lol. Why wouldn't they want to give you the lowest possible valuation for your car?
    • Yep. @Duncan also shannons they will rip you dry and will be probably limited on how much you can drive. Also keep in mind that you always have to have it garaged with Shannons, with enthusiasts as per their PDS you can have it 2 times per week on the driveway for example. 
    • I had a generic 4" Varex rear box on my old V8, worked a treat for sneaking home late at night, it was as quite as stock when closed The car was "fairly" loud when open as it consisted of 1" 7/8 headers to 3" catted Y pipe, to 4" single, it did have a resonator in the mid pipe and only the Varex out the back I also hard wired in a Varex dash mount switch, as the key fob thing is a pain to use when driving I wouldn't recommend giving the beans when it is closed though as it creates a large restriction in the exhaust  It also can in very handy when pulled over for "random" breath tests or just cruising past the constabulary   
    • Here is the before and after of the scraping/sanding of the IC pads on the tachometer board for the fix mentioned in this thread. And yes it worked fine after. Just a note if you change any components on the board the tach calibration can be wrong showing the wrong idle etc...only problem is once it is installed back in the cluster you can't get to it to adjust...ouch! My fix was to cut out the calibration pot (the blue one) from the board and run it with two wires to the fuse panel under the dash where I could adjust the idle calibration once everything was installed. And yes I soldered everything up again including the half soldered components either side of the IC in my photos                                
×
×
  • Create New...