Jump to content
SAU Community

The Death And Birth Of My Rb30 25Neo


Recommended Posts

hey guys i thought i would share my story with you all, therefore am starting a build thread

A little bit of background of the car, ive owned the car for only 3 months, this used to be my friends car for over 7 years so i know everything thats been done and how its been driven.

he has originally build the engine, well at least he thought he had but he got a bit shafted, both of us found this out when the engine failed and i pulled the engine apart.

car mods are

rb30

25 neo head

mild cams not sure on the specs exactly but the way it idles it would be somewhere with the 250-260 duration with a lift of 8.9 (which ive calculated)

NO VCT used

GARRETT gt3788r turbo

3inch exhaust with twin mufflers,

turbosmart hyper gate 45

Haltech plug in platinum pro

PE 850cc injectors

nismo adj fuel pressure reg

walbro intank pump with 044 external + surge tank

greddy copy intake manifold ported and machined for perfect fit

trust intercooler

ill upload a few photos and keep you all updated of the future build that am going to do over some period of time

Ive made 320rwkw before the engine let go :( but you dont expect stock pistons to last much at that much power

Edited by bokee
Link to comment
Share on other sites

This is where it all started when i bought the car of a mate,

this is how he had it set up

post-46081-0-46628800-1339924152_thumb.jpg

post-46081-0-47317700-1339924169_thumb.jpg

the red inlet manifold and plenum with standard throttle body is now for sale, asking 150 and pick up from syd liverpool

Link to comment
Share on other sites

So ive decided to buy a copy greddy inlet manifold and a surge tank with bosch 044 of another friend,

ive painted the rocker covers in wrinckle black and turbo in matt black

also added a oil catch can

after fitting it all and runing in a small problem with the copy manifold and vct line which wasnt used, we managed to grind off a bit and still retain the vct aftermarket line, in case i decide to run the vct. :)

here what it ended up looking like :)

to me much nicer :P well am a sucker for black lol

post-46081-0-80189500-1339925105_thumb.jpg

Link to comment
Share on other sites

Probably should chuck this up in the builds section. Lots more people who are building similar things hang out there and can give great tips.

Love the look of a tough high mount

Good numbers as well

oh shit i just realised its in the wrong thread

not the biggest computer person is there a way of just transferring it to build ups or just start another new topic with copy paste thing

Link to comment
Share on other sites

oh shit i just realised its in the wrong thread

not the biggest computer person is there a way of just transferring it to build ups or just start another new topic with copy paste thing

With any luck a mod might move it for you

Link to comment
Share on other sites

so one day i noticed that my car had a different cranking sound i let it go for a week or so didnt think of it much at that time, i honesly thought the starter was on the way out, but when i noticed that my oil catch can was half filled with oil i realised that something was not right, it was either excessive blow by engine not breathing properly so i went and checked that it was breathing properly. it all checked up alrite i went to check the compression it was dead even in first 4 cylinders of 180psi of pressure i thought to myself oh ok the engine is good but when i went to check it on 5th it only had 65psi of pressure, ohhhh shittt. the hunt then started for the failed cylinder 5 :(

started pulling things appart

post-46081-0-07641600-1339929864_thumb.jpg

inlet manifold off

post-46081-0-85545600-1339929918_thumb.jpg

rocker covers off

post-46081-0-38957700-1339929978_thumb.jpg

manifold and turbo off

post-46081-0-91601900-1339930040_thumb.jpg

post-46081-0-91455100-1339930079_thumb.jpg

it was getting preety late so i called it a night

post-46081-0-07769300-1339930127_thumb.jpg

Link to comment
Share on other sites

im guessing your expecting to find it wasnt built after all?

hope it turns out to be a monster tho :D that turbo should be huffing over 400kw with ease

Link to comment
Share on other sites

If anyones wondering y am doing everything on the car is that i didnt have an engine crane at the time, i sold my old one ages ago thinking ill never need it again and here i am lol. ive ordered one but had arrived a bit too late.

so the next thing to do was to take the head off to see any physical damage that could be seen in a cylinder bore, head or piston.

when i took the head off i didnt see much at all except a bit of oil in the troubled cylinder

post-46081-0-42458400-1340009806_thumb.jpg post-46081-0-20694000-1340009914_thumb.jpg post-46081-0-98402900-1340009929_thumb.jpg

post-46081-0-23756200-1340009952_thumb.jpg post-46081-0-80348700-1340009976_thumb.jpg post-46081-0-90773700-1340009992_thumb.jpg

post-46081-0-20458800-1340010010_thumb.jpg post-46081-0-89004700-1340010026_thumb.jpg

Link to comment
Share on other sites

im guessing your expecting to find it wasnt built after all?

hope it turns out to be a monster tho :D that turbo should be huffing over 400kw with ease

after pulling the head off first thing i saw was the piston design and it made me wonder the same thing, at the end it wasnt built well it was but with standard items

Link to comment
Share on other sites

well since i still didnt get my crane i had to do it the hard way, i just shouldve gone to another shop that had one in stock but oh well :(

yep thats right take the piston out and see what the drama is.

when i took the piston out i could clearly see a couple of things, first the ringland of the piston has cracked/broken and the second they are stock rb30 pistons hmmmmmmm

sniff sniff you smell that?

Bullcrap

heres a few photos :)

ohh yeah

post-46081-0-22851800-1340010626_thumb.jpg

am sure many of you can confirm that these pistons are standard

post-46081-0-47840400-1340010633_thumb.jpg

post-46081-0-25308400-1340010646_thumb.jpg

post-46081-0-99276000-1340010657_thumb.jpg

genuine rod you cant really tell if its been shot pined or not :(

post-46081-0-20604300-1340010677_thumb.jpg

Link to comment
Share on other sites

the only thing that has been changed was the rod bearings, ARP rod bolts and arp head studs

maybe the engine was freshend up with the ACL rb30 kit which u can pick up for around $800,

I measured the cylinder bore and it was standard :(

ive been told today that it was definatelly forged, the workshop that my friend got it off got it off of another guy whos originally built it, if this makes sence so basically workshop has bought this block of the X guy and then sold it to my friend thinking that it was properly build but anyways am starting to confuse myself :/

ARP rod bolts (good stuff) :)

post-46081-0-08333300-1340011378_thumb.jpg

rod bearing

post-46081-0-36563700-1340011388_thumb.jpg post-46081-0-23631000-1340011400_thumb.jpg

cylinder bore

post-46081-0-44477700-1340011413_thumb.jpg

it measured exactly 86.00 the first time i measured it indicatind it definately hasnt been honed :(

post-46081-0-60643800-1340011426_thumb.jpg

Link to comment
Share on other sites

FINALLY when i got my engine crane i pulled the block out of the car

its called just the bay now no engine in it :)

post-46081-0-04280000-1340011776_thumb.jpg

post-46081-0-83026800-1340011793_thumb.jpg post-46081-0-42770200-1340011806_thumb.jpg

post-46081-0-19934700-1340011740_thumb.jpg post-46081-0-23776800-1340011758_thumb.jpg

getting the rod bolts undone all pistons out

post-46081-0-12895800-1340011820_thumb.jpg post-46081-0-21988400-1340011876_thumb.jpg

post-46081-0-12760500-1340011859_thumb.jpg

oil pump and water pump off

post-46081-0-45021600-1340011841_thumb.jpg post-46081-0-12760500-1340011859_thumb.jpg

post-46081-0-29107500-1340011829_thumb.jpg

Link to comment
Share on other sites

And final update for today is that ive ordered a forged rebuilt kit from spool imports

post-46081-0-36786100-1340012313_thumb.jpg

this kit is with the h beam rods but i upgraded and went with the I beams in case i decide to go over 450rwkw

cant wait until i start building :)

Also the workshop that had sold my friend the engine (my engine now) said to send him the block back and he shall put forged pistons and hone the bore, event hough he said hes gonna do all that i still went and bought this kit, so after everything is done i might have a set of spare pistons and rods :)

Link to comment
Share on other sites

Looking good, I am going to watch with most interest.

That turbo I bought off of you a few years ago is still going well :), absolutely love it.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Similar Content

  • Latest Posts

    • They should do. I have S14 (or something S chassis, anyway) driveshafts in my R32 (because my diff flanges have 3x2). They're the right length. When you go looking for R32/3/4 driveshafts (for turbos), they're all the same thing, so are the same length. So there really shouldn't be any reason why those cheapies from JJ won't also fit an R34. R32/3 NA should also be the same thing. The (3x the price) D-Max ones are uni-fit. They have 5x1 and 3x2 bolt holes and say they cover all the cars. So that would also suggest that they are all the same except for the flanges. And in that case, the flange goes both ways. I'd be buying the D-Max ones if I ever have to replace a shaft. Because that will open up diff options without needing to juggle shafts also. Juggling shafts is gay.
    • Yeah with the adaptors they do look like the photo above - just the fitment within the plenum itself and then further with the rail to the intake is questionable - we shall see tomorrow hopefully once I get some replies from Aeroflow, maybe those bosses are the missing piece....
    • Should be fine, if you have it sitting too far in, you end up just spraying the walls and have shit idle. You "can" run them like that, however I don't think it's a great idea (also depends on your plenum, might be good to just get the injector bosses first, mock it up and see if you need to get the bottom extension) Ideally your injectors, with the extension should look like this  (Not my photos, just Google)
    • Thanks for the replies guys, it's really appreciated.  It seems the kit was supposed to come with those injector bosses but hasn't. Unsure if they'll help as even with the adaptors to make them a 3/4 height injector they still sit too far out so mount the fuel rail?
    • Hello, I am looking to replace my two rear drive shafts in my R34 N/A Skyline but I'm finding conflicting information. Do S13/S14/S15 or R32 NA/ R33 NA fit? https://justjap.com/products/gsp-premium-rear-drive-shaft-l-h-nissan-silvia-s13-s14-s15-3x2-type?currency=AUD&srsltid=AfmBOoqY7EwDaYCUoUU3mxxZ_qrUXkVVHiV4MIN7ozoar6scjnEiekv- would this fit?
×
×
  • Create New...