R34 Gtt Coilover Help

[ahhbee]

So basically i bought a set of bc br coilovers from just jap that are meant to fit the gtt, the part no is in the photo.

got bored and figured id have a crack at installing them but ran into a problem pretty quick. the lower mount hits the upright that connects to the control arms and i dont know what ive done wrong (where the red arrow is) im pretty sure ive got the correct front coilover ie. the brake line bracket it on the same side

anyone have any ideas? or solutions

[fastjetjockey]

Turn it around, and maybe put the spacer collar away from the nut? I cannot remember how I put mine on, but it worked!

[SiNNO]

The sticker says its for the R34 GT.

As far as I know they have a different rear coilover setup to the GTT.

[kaitoukid]

AFAIK, if they are for R34 GT (which would fit R33 GTST), they're both eye types on front and rear. I think the R34 GTT would have eyes at the front, but forks at the rear. Have a look?

[ahhbee]

cheers guys, i ended up turning it around after i found and old topic on instaling these in an r33 and the guy ran into the same problem. whilst they say r34 gts they are infact rear fork type

[34GeeTeeTee]

cheers guys, i ended up turning it around after i found and old topic on instaling these in an r33 and the guy ran into the same problem. whilst they say r34 gts they are infact rear fork type

Yep, rears are fork... So you got it all to work??

[ahhbee]

yea she's all good now, just have to go get a wheel alignment. thanks guys