Jump to content
SAU Community

The What Do You Put In The Back Of Your Stagea Thread?


Recommended Posts

  • 1 month later...

Good to see this thread still getting along.

I'm off to the track tomorrow, putting some stuff in another (very kind) stagea owners boot, to get down to Wakefield.

Link to comment
Share on other sites

Didn't get a photo of it, but on Sunday I put a 910mm x 2400mm offcut of Gibboard/Gyprock/dry wall in the car. Had to get my gangsta lean on to get my shoulder under one end of it but it fitted, just. It was even still in one piece once I got home with it.

Link to comment
Share on other sites

drove from melbourne to byron bay for blues fest at easter.

in the back we had 3 big plastic boxes filled with food and camping gear, kingsize matress topper and all of our bags, esky pram and much more filling the boot. then in the roof box we had the tent and decorations, rear foot wells were filled with toys to keep the little boy happy

incredible wagon for touring shame I was getting a big of surge under load (think my coil packs need looking at)

post-114189-0-30330400-1401503820_thumb.jpg

post-114189-0-73295300-1401503821_thumb.jpg

Link to comment
Share on other sites

  • 4 months later...

Just started a lawn mowing and garden maintenance business in the upper blue mountains. Borrowed my friend's, Zedhead on the forum, lawn mower. Massive self propelled Masport. Needed the ramps to get it in and out as it's bloody heavy.

I generally carry Makita battery drill kit, tool box, Stanley screwdriver set, jack, handle and sometimes chainsaw and accessories. I'll get a photo next time I do a time involving these equipment.

The other day I carried 7 bags 20kg quick set cement bags as well. Now I need to raise adjust the coilovers as the exhaust scrapes everywhere now

I carry the lawnmowers, slashers and accessories in a trailer now as the fumes are too much!!!

post-72042-0-94011900-1413848223_thumb.jpg

Link to comment
Share on other sites

  • 6 months later...
  • 5 months later...

Well, all the SAU-NSW merchandise is being handed over to a new person to deal with, so it's all packed ready for tomorrow's transfer. Hardly taxing on the capacity of the boot, and thankfully I didn't have more if this stuff to pass on. post-435-14456729927003_thumb.jpg

  • Like 1
Link to comment
Share on other sites

Work Horse.

Used the Stag for work delivering windows, this window is 1500 high and 1000 long, looks smaller in there :)

12079584_10153028730737676_9094416683093

Edited by DrLui
  • Like 2
Link to comment
Share on other sites

Well, all the SAU-NSW merchandise is being handed over to a new person to deal with, so it's all packed ready for tomorrow's transfer. Hardly taxing on the capacity of the boot, and thankfully I didn't have more if this stuff to pass on. attachicon.gifImageUploadedBySAU Community1445672983.446570.jpg

Good on you Nick, you've been quietly looking after the Merch for so damn long now....thanks for all your commitment and work.

  • Like 2
Link to comment
Share on other sites

  • 4 weeks later...

not without cutting the kart in half - assuming it is an adult kart, even with the wheels off the rear axle is about 1030mm, probably about a metre high to the top of the steering wheel - a bit lower without wheels - not sure about the length but our Rotax DD2's take up most of the room in our trailer which is 7 feet long - a bit shorter if you take the nose cone off. With side pods the kart is about 1300mm wide. Getting it in would be a big challenge. A clubman or national class kart is a bit more compact but the main dimensions are pretty much the same. I you need precise measurements of the kart let me know.

Link to comment
Share on other sites

not without cutting the kart in half - assuming it is an adult kart, even with the wheels off the rear axle is about 1030mm, probably about a metre high to the top of the steering wheel - a bit lower without wheels - not sure about the length but our Rotax DD2's take up most of the room in our trailer which is 7 feet long - a bit shorter if you take the nose cone off. With side pods the kart is about 1300mm wide. Getting it in would be a big challenge. A clubman or national class kart is a bit more compact but the main dimensions are pretty much the same. I you need precise measurements of the kart let me know.

That's probably the most concise and well answered response I've seen, thanks! How wide rough is the boot opening on an M35?

Link to comment
Share on other sites

Widest entry point is 1160mm but shock tower intrusion means it's 1050mm at the narrowest point on the boot floor. It's about 1100mm to the back of the rear seats when they're upright. With the rear seats down and the front passenger seat cranked forward I can fit a 2100mm ladder in there, although you wouldn't be able to drive with the driver's seat that far forward.

(Note: measurements taken with a half-destroyed tape measure so may be out a little bit.)

Edited by Hertz Donut
  • Like 1
Link to comment
Share on other sites

Widest entry point is 1160mm but shock tower intrusion means it's 1050mm at the narrowest point on the boot floor. It's about 1100mm to the back of the rear seats when they're upright.

(Note: measurements taken with a half-destroyed tape measure so may be out a little bit.)

Another great response, cheers!

Link to comment
Share on other sites

rear opening is about 70cm high - and if the kart is a Rotax it will weigh about 80kg - Yamaha engined maybe 20kg less. They will fit into a 6x4 trailer with the rear wheels moved in or removed. Good luck and enjoy the karting.

Link to comment
Share on other sites

...and right at this minute...me. Sleeping in the back for the next couple of nights. It's surprisingly roomy.

Did that the other week... all the gear for 2 noghts up the mountain. enought firewood foe a little cooking fire amd me Sleeping in the back with the sub box. Comfy and warm apart fron the fact i forgot the pillow

Quickest camper on the mountait

post-68505-14480041578831_thumb.jpg

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Similar Content

  • Latest Posts

    • Surprisingly the D6000 is only $1999, I'm waiting for the BF/CM sales, and hoping to get one cheaper. D4000 is well priced, still outperforms the 13" SVS PB-3000 and is like 1/2 the price at $1699 RRP. I do watch a fair amount of movies, and listen to EDM, jazz, symphonies, etc. so the lower notes from a subwoofer are always appreciated. The front 8" stage, just doesn't provide you with lively feeling, even though they are pretty bassy for a pair of large bookshelves. Then again, these days it's just playing Wiggles, Blippi and Ms Rachel, another reason the 3m wide cabinet exists, to hide all the audio gear behind it. They used to sit on a nice pair of stands, but as you know, they make good baby traps too.
    • Granted, which is a solid reason why I don't have one. My floorstanders are only -2 dB at 22 Hz.  So they're still working down to <20 Hz. Which is no doubt part of the reason why my receiver shits the bed! That Tonewinner would be about double the cost though, so it's not apples and apples. There aren't many AU$1300 subs (that you can buy prebuilt, I'm ignoring what can be achieved by DIYing) that compete.
    • -6dB at 22Hz isn't that great, watch the data from the D6000 from REW
    • I'll just leave this here. https://www.adelaidespeakers.com/subwoofers.html TL loading, big power. They sound awesome. This is what I would buy if I was going to try to take the bass away from my floorstanders. Just go with the 12".
    • I'll snap up some photos when I'm back home, in the office today meeting my "in the office" quota. Have 2x Teams calls scheduled in, office culture they reckon.   I've never owned a proper off the shelf sub, I've always made or modified broken ones with Jaycar plate amps and/or car subwoofer drivers. The current (and broken) subwoofer has a proper home driver in it, Dayton driver, thos one https://www.daytonaudio.com/product/118/rss265hf-4-10-reference-hf-subwoofer-4-ohm FS of 25Hz, which is low but not low enough. Yeah, I think they were brought out to the market to compete with SVS. I would love a SVS PB-3000 but they're not cheap, especially after their price hike. From reviews online, it does look like the Tonewinner D6000 would destroy and with good amount of money saved too.
×
×
  • Create New...