Jump to content
SAU Community

Recommended Posts

Genuine HKS GT-RS Kit. .73 rear A/R + 1Bar HKS Actuator

Asking price: $1,750 ono. (open to geniune offers)

This is the perfect turbo upgrade kit for the RB25, Straight bolt on, to standard manifold and dump. spools as quick as the standard turbo,

This turbo kit is worth approx $3k + Taxes from japan. It comes with all paperwork, warranty papers. and documents, original receipts and all fittings that come with the kit including original packaging.

The turbo kit is has been removed from the car and has been carefully cleaned and all sealed up in box.

The car was making 255rwkw(350hp atw) on 14psi. I have only ever ran it at 1bar because it was fast enough, but it is good for 22-24psi(approx 400atwhp with supporting mods). This is a low km turbo and its condition is near new. Theres no shaft play, and the turbo kit is ready to be bolted in. Welcome to inspection and professional scrutiny.

The car has never been thrashed with the new setup, and management has been taken care of by a closed loop Apexi LM AVC-R + PFC. it was driven rarely and there has been no problems what-so-ever.

Reason for selling: I am selling the turbo because I am upgrading due to my new 30/25 setup. It is what i say it is or your money back.

Shipping/insurance costs included in sales price.

no timewasters or bullshitters please.

Located in Brisbane, QLD

Contact: Dale on 0432279166 or 0419745910

http://img850.images...hksgtrskit2.jpg

hksgtrskit2.jpg

http://img809.images...hksgtrskit3.jpg

hksgtrskit3.jpg

http://img267.images...hksgtrskit5.jpg

hksgtrskit5.jpg

Edited by SilverECR33
Link to comment
https://www.sau.com.au/forums/topic/402975-upgrading-your-turbo-on-your-rb25/
Share on other sites

awesome looking kit mate, best of luck with the sale. If I wasn't jobless and broke and didn't own an auto and it didn't have a big-ass dent in the side I would definitely go for this. Just out of curiousity what's that 4-way joiner in the bottom middle of the pic for, the one that's sitting on the pack of hose clamps?

awesome looking kit mate, best of luck with the sale. If I wasn't jobless and broke and didn't own an auto and it didn't have a big-ass dent in the side I would definitely go for this. Just out of curiousity what's that 4-way joiner in the bottom middle of the pic for, the one that's sitting on the pack of hose clamps?

thats a good question for HKS :) . I never used it. I'm pretty confident its a vacume T. I did mine a little different and didnt retain the standard intake manifold and cooler pipework. So I didnt need it.

Cheers

T piece for boost feed to the actuater

i was thinkin the same thing thanks

Suit RB20?

it should yes. as long as ur flange and the dump are correct type. which i think they may well be.

Are the splitfires in the pic for sale too?

No im sorry Im keeping those

Suit RB20?

If I had the cash it would already be in transit toward my RB20

spools as quick as the standard turbo

If this it true it will be ok on an RB20, I had a 25 turbo on my car when I bought it and it didn't feel laggy.

Edited by cherring

I can attest that this is a perfect turbo for a RB25 daily drive... Super responsive 250rwkw+

If someone buys this, message me if you're after a custom coil pack cover to go with the turbo (see pics below)

I'm switching to RB26 covers, so it's available for sale.

post-3204-1259824142_thumb.jpg

Engine Pic (HKS GTRS Coil Cover)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I usually source pressure on inlet manifold after throttle body
    • Where is the best location for boost pressure source when running mac 3port boost solenoid?  my new turbo does not have a fitting for that on the compressor housing.  how come Garrett make a turbo without that?  im confused 
    • From my memory, which isn't that great, we did have issues getting the large throttle body on my old LS1 to play nicely at idle, first it would stall, then it would only idle at 2k rpm, then it would hang at 2k rpm for a few seconds and then drop and stall, then, finally, the best we got was it would hang at 1.5k rpm for a few seconds then drop to around 800 rpm The tuner stated that large cable throttle bodies are a PITA, and if I wanted anything better than what we ended up with I would need a electronic throttle body and all of the aftermarket ECU stuff to run it
    • So, my intake arrived  I'm not happy with the coating finish so I went to Supercheap and got some black wrinkle paint and some prep stuff I was initially thinking about using grey wrinkle paint, but finding a quality product that gives the texture I want was "unfindable...", so the tried and tested black wrinkle paint is again finding its way into the engine bay for the OEM look I'll sneakily head into work and get the big ovens cranking to cure the paint over the next week or so I've also contacted MX5 Mania today to talk about the install and tune, so painting it is my "main effort" prior to sending the car off In other news, the correspondence from the US supplier is fair to midling to say the least, I'm still trying to track down the intake box thingie with the larger intake pipe to suit the throttle body, it still is "awaiting fulfilment" (no stock currently available), if it isn't here soon I'll just get MX5 Mania to fabricate up a CAI that is easy to service the air filter  
    • Thanks mate. I thought it would be that way.
×
×
  • Create New...