Jump to content
SAU Community

Recommended Posts

Genuine TE37's 17x9" Dark Blue +6 Tyres.

17x9" TE37's that came on my car when I imported it from Japan in 2005. No they are not fakes, they're the real thing. Very light with Rays Engineering & Made In Japan stamped on the back and of course are very light.

Not too sure about the offset as the stickers are long gone but they are a pretty aggressive offset as per the pictures of them on my 32GTR. I don't know if they'll fit under your guards on your car.

Are a little blasted and also have some minor rash.

2 of them have RE540's 255 40 - bald.

Other 2 have new Michelin Drice 235 45 on them, also another two new Michelin tyres unfitted.

No centre caps.

Reason for sale : Have moved to wider TE37's.

Location : Hawthorn East, Melbourne. Will ship if buyer arranges courier.

$2000

Contact  : 0425 730 031

gallery_1646_1323_561477.jpg

gallery_1646_1323_459563.jpg

gallery_1646_1323_190440.jpg

gallery_1646_1323_462727.jpg

gallery_1646_1323_274995.jpg

gallery_1646_1323_266895.jpg

If they are in fact 17x9, i'd put money on them being +22 or +15.

I was under the impression that R32s struggled a bit with +12 offset, but the owner did say they're quite aggressive at the moment.

  • 4 weeks later...
On 6/24/2012 at 8:39 PM, Owgasm said:

If they are in fact 17x9, i'd put money on them being +22 or +15.

I was under the impression that R32s struggled a bit with +12 offset, but the owner did say they're quite aggressive at the moment.

 

wow just found this post again, from when I thought i'd sell these wheels.

Ends up they're 17x9 +0 (yes, 0 offset TE37's - they stick out further than my +12 9.5 TE37's). Long discontinued by Rays.
Glad I kept them. The call for another set of TE37's is strong. Anyway .....back to my beer.

4 minutes ago, Mohsen said:

youre a monster

yeah, I realised now I defiled them, seeing as they were Mag Blue.

I have plans on getting them professionally sprayed back to their original colour.

5 minutes ago, niZmO_Man said:

Sorry, I should have said "pretty much the same as" :D

I should also add that when Racepace took the front brake setup off to replace them,, they discovered a dodgy spacer setup (had some sort of Brembo setup when I got the car from Japan). Hence the front wheels now sit slightly more into the guards then in that photo.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • One other question, is there a chance that changing the idle speed can lead you down a rabbit hole and is the reason the tuner didn't touch it? Reason I ask is because if that's the reason the tuner avoided it then I probably shouldn't be touching it lol.
    • Pfft. As if I'd ever point a high pressure washer at my car.
    • The nature of my commute has changed. Way back then it was traffic lights all the way, for ~28km. It sucked. When they finally stitched the expressway together I could do a good 15+km of it at a steady 80-100 with no stopping. That alone has gotten me down to flat 10s. Prior to that it was mid-high 10s. I can't remember the delta that I saw when I got the idle down. It was only ~150 rpm, because the idle speed was never terrible, but for the delta in consumption to be noticeable it would have had to have been at least 0.2-0.3 L/100km - which is not to be sneezed at when it comes for absolute free. It's only about 50L per year, but that's ~$100. A few extra pizzas is always welcome. Note that I have a record of every tank of fuel that has ever gone through my car except for a handful put in by someone else, like my mechanic. I can show you the difference between stock RB20 and tuned RB20, stock RB5Neo and tuned, winter and summer fuel blends, winter and summer fuel blends when the ambient temperature is not appropriate for the blend, working O2 sensor, blown O2 sensor, boosting f**k out of it and frightened to boost it because it is pinging, and so on. OK, I probably can't do all that now with 100% clarity - but at the time when any of those things were in event, you could see it in the records. There's 25+ years of simple tank after tank records, so you have to look for landmarks to work out approximately how old any single record is. What's really important is the meta data and that lives in my head.
    • If you're claiming the issues are not skyline specific, then either the USA is living in the 90s / early 2000s, OR you have the issue of "survivor bias". Which is you're mainly hearing and listening to those with terrible experiences, and haven't found the guys who have cars with good decent builds and no problems. It happens in AU too, that plenty of people keep having issues, and they keep going to the workshops that are known to be shit "because I read on the internet". Even worse, are those who keep posting on the internet as though they know for a fact what something is, when they've never touched/looked at said item in their life, and again are making assumptions, based on something they read, or because it's a certain way in other cars. It's even funnier when those same people debate the facts with the people who've lived and breathed this stuff for over 15 years. Example, I've had someone tell me you can't do something with a Skyline, because they read it on the internet, except I can tell they're wrong, as I did that exact thing back in 2008 with my Skyline.
    • The funniest part I saw, was someone would bitch and moan on FB about something, Andy would be the one to respond, asking for more info, if he could contact them, what the engine setup is, what their config file was, and 95% of the responses were people just going "der! It doesn't work" and Andy going "What doesn't work?" And then going "The firmware!" And they'd go around in circles as no one could ever give information, and Haltech couldn't fault things on the bench, (especially when people wouldn't give any specifics).   Many moons ago, when Andy was back at e420c stage, he reached out to me, and asked me to test different plug and play looms for him (already had an e420c in the car on his V1 PNP loom). And he kept asking me, as I was competent enough to be able to give him some specific feedback on what was/wasn't working, how to replicate the faults etc, and work through things with him. Most people are terrible at answering the questions they're asked, or being able to provide quality feedback other than "it doesn't work".
×
×
  • Create New...