Jump to content
SAU Community

Fs: R33Gtst 200Rwkw 97,000Kms Act

reaper1721
 Share

Recommended Posts

reaper1721 Collaborator

reaper1721

Posted
Posted

For sale is my R33 gtst S2 1996 97,000kms

Mods/work done is as follows:

Gates racing timing belt and tensioners done <10,000kms

Drive belts replaced <10,000kms

Water pump replaced <10,000kms

HKS Fcon Vpro piggy back ecu. tuned to 210rwkw on 14psi. Currently running 11psi making 195rwkw. Have dyno sheets to prove. Tune is MAP based instead of AFM.

Blitz dual solenoid boost controller with incar digital control.

HKS front mount intercooler.

Full 3 inch custom turbo back exhaust with shotgun/blast style pipes at the rear. The exhaust is not rediculously loud however the car can come with either/both a 3.5 inch cat back and i also have a stock system if rego concerns you.

Airbags and ABS for those safety conscious people.

Ohlins adjustble shocks and springs front and rear. Legal height.

Factory rear strut brace.

No name front strut brace.

Large (commodore size) battery fitted.

Clarion head deck with rear usb

6 inch front and 6.5 inch rear kevlar splits.

Comes with moulded sub box to suit the right side of the boot, i can probably throw a sub in too, no amp at this stage though.

sub/amp wiring has been run to the boot.

2 Gauges below the cd player on an allot face plate. One digital volts gauge and an analog VDO boost gauge. Both gauges light up blue to match the cd player.

18x8 front and 18x9 rear wheels. Starcorp mesh.

Front tyres are Maxxis MA-V1 235/40 with good tread aside from some inside edge wear.

Rear tyres are Federal 595SS 265/35 with good tread.

Factory floor mats front and rear.

Interior is in great condition, only let down is the usual drivers seat tear, however it is still very small.

Factory wind deflectors over the door windows.

Short shifter

New leather handbrake and gear boots bought last year (group buy)

The bodykit is very tame with an N1 look-a-like front bar and matching side skirts and rear bar.

Comes with a HICAS lock bar but has not been fitted yet.

Comes with NISMO side indicators which have not been fitted yet.

Always serviced every 5,000kms with top quality german fully synthetic oils (Fuchs brand)

PBR dot 5.1 brake fluid.

I have never had this car on the track, much as i would have liked to. The previous owner did not seem the type either. (he was in the navy and barely got a chance to drive it. He did 5,000kms in 3 years.)

My name is Jono and you can contact me on Zero 415 055 80Nine

Asking $9k ono

The car is located in ACT.

skyline.jpg

skyline2.jpg

skyline3.jpg

If you want more photos feel free to ask.

Link to comment
https://www.sau.com.au/forums/topic/403219-fs-r33gtst-200rwkw-97000kms-act/
Share on other sites
reaper1721 Collaborator

reaper1721

Posted
  • Author
Posted

how much does it cost to transfer the car from ACT to vic??

Do you mean to transport, or rego costs?

If you mean transport, a flatbed would be about $1200.

Shipping via a larger car carrying company or major shipping company might be cheaper.

reaper1721 Collaborator

reaper1721

Posted
  • Author
Posted

More photos of interior and engine as requested

20120624_165611.jpg

20120624_165642.jpg

20120624_165627.jpg

20120624_165719.jpg

20120624_165739.jpg

20120624_165728.jpg

20120624_165756.jpg

20120624_165802.jpg

Second last pic is of the MAP sensor. The AFM is not connected, it is just there for appearances. It will be fitted with a Mushroom filter at the time of sale.

I have also included a pic of the compliance plate for anyone who wants to do a revs check. Rego plate is YGR99C

It will also have a gearknob at the time of sale.

  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Ticking Sound On Idle - Rb25

      By GTSBoy · Posted

      Well, hydraulic lifters will get noisy if they are dirty/fouled in some way, and exactly how that manifests will depend on exactly what schmutz is where. There is a procedure on here somewhere for dismantling and soaking/cleaning them. Replacing them with new is about 50% of the work and about 5% of the money!
    • myrbgivesmeheadaches
      Ticking Sound On Idle - Rb25

      By myrbgivesmeheadaches · Posted

      Thanks for the reply @GTSBoy this is is a hydraulic lifter engine. Yea right i did not realise the lifters were supposed to be compressible while installed. I could push them down but i had to lean almost my while body weight on them.  I have never heard of a lifter/ lifters ticking only at hot idle and getting worse the hotter it gets. I have owned a few jdm cars with noisy lifters. This noise is slightly more subtle, it is more of a sharp gentle metalic tic than the solid and more loud tapping I've heard on lifters. I have used a metal rod, alloy tube, hose and stethoscope and could not find the source of the tick. But it appears to be loudest on the actual engine block behind the exhaust cam gear and next to the oil filter. I had mate (40 year old mechanic) go over it with me and he couldn't find it either..  Could it be a cam seal issue of some sort?  Cheers  
    • GTSBoy
      Ticking Sound On Idle - Rb25

      By GTSBoy · Posted

      This seems problematic and unlikely at the same time. Vanilla RB2Xs have hydraulic lifters. They do have "zero" clearance, but only when running with oil pressure inside them. When not running, you should be able to compress them and obtain heaps of clearance. RB26s and Neos have solid lifters. They should have ~0.3mm and ~0.5mm on the inlet and exhaust respectively. If they have zero clearance then bad things are happening. With nothing else being wrong, it would mean that the valves would be held slightly (ever so slightly) open when they are supposed to be closed and it should have all sorts of problems when running, caused by leakage in/out through the valves. Or, zero clearance can indicate severe valve seat recession. None of it is good. Have you used a piece of hose as a stethoscope to try to localise the noise?  
    • myrbgivesmeheadaches
      Ticking Sound On Idle - Rb25

      By myrbgivesmeheadaches · Posted

      Sorry for reviving an old post, but I'm having the same hot idle tick issue. Did anyone ever find out what it was?  I have checked/ replaced Injectors Coils checked Lifter clerance (is at zero) Checked Cam lobes Replaced exhaust gasket and studs Would appreciate any advice this is driving me nuts  
    • MBS206
      NC MX5

      By MBS206 · Posted

      There's a huge reason manufacturers are tuning in dead flat torque curves... Make them reliable (and more drive able)
×
×
  • Create New...