Jump to content
SAU Community

Anyone In Hastings Tomorro Free To Come Check Out My Cooling System?


Recommended Posts

if there's not tell tale signs take the plugs out and turn the motor over until your reach TDC for each piston get a nice little pin point torch shine it down the plug hole and see if there's coolent staining ontop of the piston or a puddle.

a nice little way for checking a blown head gasket if your getting paranoid :wacko:

Brilliant! Well I bleed it eventually heater is now hot a again, let it warm up for twenty mins then took it for a 10 min run, ran full boost to over take a car, no hesitation what so ever no sweet smell and no smoke, plus it went like the clappers. Fingers crossed it was just the thermostat. Cheers for all the help guys, will see how it gets on with a 50k drive to work in te morning.

righto, checking in, seem no problems to report. touch wood. gave it the beans without the heater on for the last 1-2 ks and all seems well, awaiting some goodies like turbo timer and things this week. so once they are sorted ill take her for a big run to the country! right now i have to find a single coil pack to replace my taped up one. thanks again people!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • How would i degree my cams on an rb25 hydraulic lifter head? lots of information online about degreeing cams on NEO or rb26 heads with solid lifters but cant find a definitive answer about hydraulic lifters. is the process just the same for both hydraulic and solid lifters on an rb (dial indicator on top of the lifter for measuring valve position) or do i have to mess with my lifter to make it solid for the degreeing process?  
    • Hmm. Two terminals. Probably just conductivity. If you knew the shape of the curve, you could probably just do it with a multimeter.
    • Clinton and I spoke to Alan Heaphy at length last year at the Bathurst 1000 about the Gibson GTR's that he had at the track and the restoration work that his company was involved with. He has a number of people working for him who were part of Gibson Motorsport when these cars were being built and raced. What impressed me the most was the amount of first hand knowledge and information that he and his team have about the Gibson GTR's and their meticulous attention to detail in the restoration and maintenance of these cars.
    • When you track RPM vs time it's clean, unlike the OEM one, even with filtering there are ripples. Means no random misfires or triggering issues at higher RPM, especially if you have big lift cams and a noisier valve train due to heavier springs.
    • Brake Fluid testers are cheap and readily available....eg https://www.supercheapauto.com.au/p/endeavour-brake-fluid-tester-rechargeable/SPO9539349.html
×
×
  • Create New...