Jump to content
SAU Community

Recommended Posts

so after checking the forums for this problem in most cases it was the switch that has burnt out. went out and got a second hand one and went to install it. problem is the wiring plug that plugs into the switch itself is all nice and burnt.

anyone know where i can get these from or will i have to buy a whole loom for the plug???

Link to comment
https://www.sau.com.au/forums/topic/403408-headlight-switch/
Share on other sites

how the hell did the plug get burnt? i would address that issue first or it might just happen again.

but yeah if you find any r32 being wrecked you should ask if they'll separate just that plug. they might say no, and understandably because they might want to sell the thing complete, although the interior electrics loom is often hacked up at the radio plugs anyway, so whats another missing plug?

so yeah it wouldn't suprise me if you had to buy a whole loom just for that plug. it'll be a bit of a job if you're wanting to be anal about it and replace the whole loom, on that part of the loom there really isn't much room for extra joiners and stuff in the hole so will probably mean it needs neat & tidy wiring if you're just going to replace the plug (if you want it to be reliable).

i've made numerous efforts over the last few years to find an interior loom with all plugs intact and every single one i found had the radio wires butchered, which for me, is a deal breaker. so

Edited by jonboy

Its not uncommon for plugs to get burnt in cars, bad connections in the terminals cause them to heat up and warp/bubble the plug, always make sure plugs fit nice and tight and not flopping about otherwise it will cause you more grief down the track.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It's unfortunate what Tomei USA has done to Tomei's name in general. I'm very weary of ordering parts from them now. I only order direct from a Japanse source (e.g Nengun). At least their logos are different, so you end up knowing what you have. 
    • Update Issues 5 (plus #4) - 10 After making a claim about issue #4's missing part, DeAgostini Japan sent a whole new issue #4 and it arrived about 2 weeks after that. That was back in early March. It took another 4 weeks to receive issues 5 - 13 though. This update is for issues 5 - 10. Ove the 5 issues the front left suspension and most of the engine have been completed. The quality of the castings and fit of the parts is quite good, it seems better than DeAgostini's BNR34 Skyline GT-R from the Fast & Furious 2 movie, which (to me anyway) doesn't seem to have as tight tolerances or quite as accurate castings.  Each issue has a lot of info about the 1989 - 1993 Skyline range and other Nissan models from that era, but the focus is on the BNR32 Skyline GT-R Nismo and the various racing it did in Japan, Europe (Spa 24hrs) and of course Australia. I've included some text translated with Google Lens in some photos and will add to them if there's anything worth including. 
    • If it's for a SR20, make sure it's not the American Poncams, might as well call them Poocams. Had a set in a friend's car, all scuffed up after a few track days. Like the metallurgy Tomei USA used is junk. Went back to JDM OG Tomei Poncams, no issues till now.   Tomei USA is not the real OG Tomei.   Random rant over, fk the US of A, bunch of c u n t s. 
    • Most of the industry in North America either runs on Siemens or Allen Bradley. I have two redundant S7-1500's on my desk right next to me for simulation. Siemens has been losing ground though since Stuxnet, as cybersecurity is a big thing. In my line of work that is federally regulated, you must by law have a cybersecurity management program in place and its audited and inspected every so often.  I work with Emerson PLC's daily (RX3i's) and have done large biogas/refinery projects with their DCS's. Their PLC's are somewhat OK minus the way they do PLC redundancy (You have to download on both PLC's separately every time you make a change )  As for their DCS's... you'll be limited financially first before anything else stops you. Costs are exorbiant at roughly 10x what it would cost you to do with any other system (e.g AB PAC).  1990's, those suckers are brand new haha! Kraft-Heinz (An old client when I use to work for an ESP) still runs Siemens TI505 PLC's from the mid 80's. Ohh how I don't miss working with those... you could only do a certain number of online downloads until it's "Change" buffer would be full and you would then need to go offline to do a full download. There was no warning of when this was coming up and it generally would happen when you would go in at 2am to make changes before production -_-.     
×
×
  • Create New...