Jump to content
SAU Community

Recommended Posts

  • Replies 71
  • Created
  • Last Reply

Top Posters In This Topic

Not sure of my diff ratio but I think its standard,just under 8000rpm in 5th,265,35,18 kumhos,best run was 271km/h was averaging in the 260s.

Yep, my tyre is a bit taller too.

With this turbo it makes 565kW atw wheels on 36psi, I was on 29psi in 4th which is about 480kW and 22psi is just under 400kW.

The stones were no where near as bad at Temora,Im not laying crap on the event,just saying it was bad.Alot of the cars entered are beautiful street cars and thats a definate turn off.

I totally agree.

Thanks again for the feedback. We had a number of people say Temora was worse, some said Cooma was worse. Either way, we are fixing it, thats the difference

565Kw,is that all,lol!!!Man that is wild.And is that a four cylinder?Adam gets them going hey.Shame you werent at Temora as you would have givin the front runners a scare.I was coming 4th outright up until the last round but ended up sixth with only slightly under 400Kws,although AWD definately helped me.You youtube clips are cool(other than the stones)my incar ones on the as well under Temora 1000 if you want to checkout.Remember im an old dude but I try my best.Anyhow you should be proud of how you went,I think you should come to Temora next year,kick some arse and I will shout you a beer.

The stones were no where near as bad at Temora,Im not laying crap on the event,just saying it was bad.Alot of the cars entered are beautiful street cars and thats a definate turn off.

Did you race at Cooma, Because I am pretty sure you weren't on the entry list?

Hey Roy,at the moment my exhaust could definately be improved.I used to build custom exhausts and extractors for many cars including a couple of "B" grade V8 supercars so ive got a bit of knowledge.The outlet on my single turbo is 3" which is the size of the dump pipe,in my opinion it should flare out to 3.25 or 3.5 but its reasonable.It runs to a smashed out 3" cat(which I did not do)which again is too small.From there on is 3.5 stainless system,of course all straight through.Some time next year im going to build a better system for it.The new system will be made out of mild steel as its always quieter,and the packing in the mufflers never lasts as long as the stainless pipe and muffler housing,so really stainless is just for show.The only real way to test your exhaust is to drill a hole in it,say just in front of the cat and hook up a pressure gauge.If it moves at all,that means backpressue,and that means power loss,especially on turbo cars.Sorry to ramble on but this has been a passion for both me and my Dad for years now.We have also developed a variable exhaust system using butterflies actuated by adjustable pressure sensors,so you can have the best of both worlds and get rid of that annoying highway drone.Remember your exhaust is just as important as any other performance part on your car,but Im sure you know that,cheers mate

  • 1 year later...
  • 2 weeks later...

A customer of mine James (fitted Xspurt 2000's to it just before it's last tune) owns the Supra that managed 308kph terminal speed. Unsure how much power it was putting down as there are bugger all dyno's down here that will measure over 700-800kw at the rears. Shame he couldn't get any traction, almost the whole way down the runway. :P

Definitely a bonus to those with AWD...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Lucky man, who owns it in the family? Any pics? 
    • The engine stuff is Greg Autism to the Max. I contacted Tony Mamo previously from AFR who went off to make his own company to further refine AFR heads. He is a wizard in US LS world. Pretty much the best person on earth who will sell you things he's done weird wizard magic to. The cam spec is not too different. I have a 232/234 .600/603 lift, 114LSA cam currently. The new one is 227/233 .638 .634. The 1.8 ratio roller rockers will effectively push this cam into the ~.670 range. These also get Mamo'ified to be drilled out and tapped to use a 10mm bolt over an 8mm for better stability. This is what lead to the cam being specced. The plan is to run it to 6800. (6600 currently). The Johnson lifters are to maintain proper lift at heavy use which is something the LS7's supposedly fail at and lose a bit of pressure, robbing you of lift at higher RPM. Hollow stem valves for better, well everything, Valve train control. I dunno. Hollow is better. The valves are also not on a standard valve angle. Compression ratio is going from 10.6 to 11.3. The cam is smaller, but also not really... The cam was specced when I generated a chart where I counted the frames of a lap video I had and noted how much of the time in % I spent at what RPM while on track at Sandown. The current cam/heads are a bit mismatched, the standard LS1 heads are the restriction to power, which is why everyone CNC's them to get a pretty solid improvement. Most of the difference between LS1->LS2->LS3 is really just better stock heads. The current cam is falling over about 600rpm earlier than it 'should' given the rest of my current setup. CNC'ing heads closes the gap with regards to heads. Aftermarket heads eliminate the gap and go further. The MMS heads go even further than that, and the heads I have in the box could quite easily be bolted to a 7.0 427ci or 454 and not be any restriction at all. Tony Mamo previously worked with AFR, designed new heads from scratch then eventually founded his own business. There he takes the AFR items and performs further wizardry, CNC'ing them and then manually porting the result. He also ports the FAST102 composite manifold: Before and after There's also an improved racing crank scraper and windage tray. Helps to keep oil in the pan. Supposedly gains 2% power. Tony also ports Melling oil pumps, so you get more oil pressure down low at idle, and the same as what you want up top thanks to a suitable relief spring. There's also the timing chain kit with a Torrington bearing to make sure the cam doesn't have any thrust. Yes I'll post a before and after when it all eventually goes together. It'll probably make 2kw more than a setup that would be $15,000 cheaper :p
    • Because the cars wheels are on blocks, you slide under the car.   Pretty much all the bolts you touched should have been put in, but not fully torque up.   Back them off a turn or two, and then tighten them up from under the car with the wheels sitting on the blocks holding car up in the air.
    • Yes. Imagine you have the car on the ground, and you mine away all the ground under and around it, except for the area directly under each individual wheel. That's exactly how it'd look, except the ground will be what ever you make the bit under each wheel from
    • Yes, if you set the "height" right so that it's basically where it would be when sitting on the wheel. It's actually exactly how I tighten bolts that need to be done that way. However....urethane bushes do NOT need to be done that way. The bush slides on both the inner and outer. It's only rubber bushes that are bonded to the outer that need to be clamped to the crush tube in the "home" position. And my car is so full of sphericals now that I have very few that I need to do properly and I sometimes forget and have to go back and fix it afterwards!
×
×
  • Create New...