Jump to content
SAU Community

Going To Single Turbo On My Gtr,need Help!

Offtap33
 Share

Recommended Posts

Offtap33 Enthusiast

Offtap33

Posted
Posted

Hey all hope use could help me with a few questions I have a 33 v spec I just took the motor out as doing some work and new shell ect, any way I was thinking of going single turbo just wondering what ya thoughts where? Is it worth it

But I main question is what sort of things do I have to change to go single? And what turbo do youse recommend my current mods are engine:

* low km reconditioned head

* HKS 272 cams

*CP forged pistons

* argo conrods

* balanced crank

* ACL race bearings

*Nitto oil pump

*new water pump

* sump baffle

* splitfire coils

* R34 N1 turbos

* stainless dumps

* 3"exhaust with HKS muffler

* metalcat

* walbro 500hp fuel pump

*700cc denso injectors

*adjustable fuel reg

*Z32 a/f meters

*apexi pods

*alloy radiator

*power fc

*greddy profec b ebc

*oil catch can

Drivetrain:

* Jim Berry carbonic race clutch

* nismo flywheel

*nismo slave cylinder

*cusco front diff

Let me know what you guys think:)

Weapon Mentor

Weapon

Posted
Posted

Depends what power you want really, I've had two RB26 set ups essentially and the one I have in my GTR now is the best I've had (the stock unopened motor is holding it back alot however) I have had 3 single turbo set ups on my GTR to date.

I'm currently running a Precision Billet series PT6262 turbo charger, un real response full 1.6 bar by 4200rpm on 98RON however with a built motor my peak power would be a lot better. Previous set ups have included a Garrett GT3582R and a Turbonetics T66 (plain bearing 0.90 roughly housing) I've never liked the poswer delivery of twins however they may have their advantages in the 3-360kw range. However I have no complaints since changing to a single high mount plus the maintenance is a hell of a lot easier :)

  • 3 weeks later...
Offtap33 Enthusiast

Offtap33

Posted
  • Author
Posted

Awesome thanks mate :) is it a lot of stuffing around to go to single? Sounds like you have some awesome setups!!

What do you have to change to go single? Do you still get aircon ect. I was reading that some people change a heap of stuff I'm not gonna go to big just something that looks nice and is resposive

wedge_r34gtr Mentor

wedge_r34gtr

Posted
Posted

if your arfter a bit more kick, why not just get some -5's? you have good supporting modes in place and they will just bolt up to your current setup. would be a cheaper option then going single.

single would require new intake piping, exhaust manifold, dumps and front pipe etc.

If your keen on the single route, i see alot of people getting good results with a t04z

DVS JEZ Grand Master

DVS JEZ

Posted
Posted

Depends what power you want really, I've had two RB26 set ups essentially and the one I have in my GTR now is the best I've had (the stock unopened motor is holding it back alot however) I have had 3 single turbo set ups on my GTR to date.

I'm currently running a Precision Billet series PT6262 turbo charger, un real response full 1.6 bar by 4200rpm on 98RON however with a built motor my peak power would be a lot better. Previous set ups have included a Garrett GT3582R and a Turbonetics T66 (plain bearing 0.90 roughly housing) I've never liked the poswer delivery of twins however they may have their advantages in the 3-360kw range. However I have no complaints since changing to a single high mount plus the maintenance is a hell of a lot easier :)

What power are u making with 6262? What boost

Weapon Mentor

Weapon

Posted
Posted

Well it made 320kw on around 20psi which I'm

Not happy with however it may have something to do with the only mildly decent tuner up this way tuned it to around 10.8:1 afr's lol so it would make 350 or so leaned up a bit... However I was also after a bit of life from the stock motor to so I'm not complaining.

Going to a single was the best thing I ever did for my GTR, in terms of changing things that's par for te course however it's definitely worth it.

My GTR is currently getting parted out.... So my turbo set up is for sale complete with hot side piping, dump and front pipe to suit 32/33 GTR and intake pipe lol

DVS JEZ Grand Master

DVS JEZ

Posted
Posted

Sedat i have been very impressed with precision turbo's. I hve just finished a r34 neo with 5558(precision) it made 367kw on 22psi ethanol and full boost at 3900,

I have just fitted a 6262 twin scroll onto my personal GTR which i was planning to tune this week but found a water leak under the plenum so i pulled that iff tonight.

My aim is 400kw with full boost at 4200.

U should go a 65 series or so for 450+kw

eXquiSit Mentor

eXquiSit

Posted
Posted

was this neo built or stock?

Sedat i have been very impressed with precision turbo's. I hve just finished a r34 neo with 5558(precision) it made 367kw on 22psi ethanol and full boost at 3900,

I have just fitted a 6262 twin scroll onto my personal GTR which i was planning to tune this week but found a water leak under the plenum so i pulled that iff tonight.

My aim is 400kw with full boost at 4200.

U should go a 65 series or so for 450+kw

zebra Grand Master

zebra

Posted
Posted

Sedat i have been very impressed with precision turbo's. I hve just finished a r34 neo with 5558(precision) it made 367kw on 22psi ethanol and full boost at 3900,

I have just fitted a 6262 twin scroll onto my personal GTR which i was planning to tune this week but found a water leak under the plenum so i pulled that iff tonight.

My aim is 400kw with full boost at 4200.

U should go a 65 series or so for 450+kw

Jez

Wait....I'll send you a pm

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Sean'O
      3D printing fun

      By Sean'O · Posted

      Howdy friends, So another weird one today, I was looking into replacing some broken clips holding the front grille for the R32 GTR (part number 01553-03831), and noticed the brackets which are supposed to hold the grille in place were also missing 😑. I do recall seeing this issue many years ago, but didn't fix it at the time. A quick look on eBay and I was able to find the genuine brackets, along with all the screws which suited the headlights (part numbers 26042-08U05,26092-08U05). Happy days!....  Once they arrived however there was an extra nut in the packaging which implied that there should also be a bolt or a stud, and sure enough, after a bit of searching I found this thread from 2013, and @Ants clearly shows a stud should be present. Reading around a bit more, it's possible the headlights on my car are the "povo pack" headlights as mentioned by @funkymonkey in this thread way back in 2008. This could explain why the studs are missing on my set of headlights. Looking at the headlight diagram I wasn't able to see a suitable part number for the stud itself. The headlight did indeed have a recess that looked like it would accept a stud, but interestingly no thread or anything obvious how the stud would be affixed to the headlight, I suspect it may have been glued in, press fit, or melted into the plastic at the factory. Another member may be able to clarify if they happen to have a genuine set of N1 headlamps. The only thing we have to work with within the recess is a keyway which likely is there to prevent the stud from rotating within the recess. In any case, back to 3D printing, I put together a model which acts like a pug with a friction fit inside this recess, making use of the keyway so it doesn't rotate while tightening a bolt. Printing in TPU will allow it to slightly swell making a nice snug fit without cracking the part. I've designed the adaptor it to accept an 20 mm M6 bolt (stainless with a cap head in my case), as opposed to the standard M5 stud and I made use of the standard galvanised split washer that came with the genuine brackets from Nissan. Once the bolt and screws were all in place, giving the bracket a gentle shake gave the classic "shaking the car" feeling, very solid, which gives me confidence this is going to be able to hold on much better than the janky solution which seems to have been here for the past decade or so. Overall I'm really pleased with how this turned out and maybe there are more people out there running these headlights without a centre stud at all! Link to the freely available model on Printables: Click here Regards, Sean  
    • GabsReDeal
      R32 GTS (RB20DE) clogged cat

      By GabsReDeal · Posted

      Hey everyone, This is my first post apart of the introduction. I tried searching a bit on the forum but couldn't really get a straight answer. I got the car to my mechanic as I felt it being weak. It seems that it was missing on two cylinders due to the injectors. I had all my injectors clean and the car runs much better. The mechanic also confirmed my suspicions that the cat is clogged and needs to be tackled asap. The cat rattles a bit and the hot exhaust warning frequently lights up when driving after getting the injectors clean. In my introduction I was asked about what modification I might be interested in and mentioned a cat delete. From what I was told, this is not really beneficial on the RB20DE and there are more cons than pros.  Could perhaps anyone give some suggestions on what the best course of action would be since the current cat is toast and needs to be removed/replaced anyway? I can also sometimes smell a strong smell of fuel, but I'm not sure if this is related.
    • Milkmun
      NC MX5

      By Milkmun · Posted

      Hope the cans went down well at least 
    • Milkmun
      Neil's R33 Gts-t Build

      By Milkmun · Posted

      255 can't go wrong with the price.
    • Kinkstaah
      Neil's R33 Gts-t Build

      By Kinkstaah · Posted

      When I was replacing my pump due to being stranded in the wrong state, I went with the Deatschwerks 320lph kit. It is a direct plug in to the stock wires, harness, everything. It comes with a plug... but you can plug the OEM plug directly into this thing. https://justjap.com/products/deatschwerks-dw300-fuel-pump-nissan-s13-silvia-r32-r33-r34-skyline-c34-stagea?currency=AUD Downside: Won't actually flow that much on boost if you want to push it on E85, but it's comparable to the 040/255 etc. Little more actually.
×
×
  • Create New...