Jump to content
SAU Community

Recommended Posts

ForumLogo.jpg

Event : Shannons Insurance Snowy Mountains 1000

What : 1000m Sprint on a runway

When : Saturday 27 October, 2012

Where : Snowy Mountains Airport, 1611 Kosciuszko Road, Cooma, NSW 2630

Cost : $150 per car vehicle including numbering kit

- Open to all cars

- Runway is 2.2km long with 990m sealed braking area and 150m dirt run off, so there is plenty of braking distance.

- Runway is being commercially swept on the Friday before the event, from one end to the other and side to side.

- We have many high powered cars coming, from Touring cars through to Pro Class time attack cars

- All mobile networks work there

- Over 13 motels, plus pub/hotel accommodation, Camping/caravan parks and B&B's

- Approx 1hr south of Canberra

- all 4 major fuel companies in town and all stock 98 Octane

- Show N Shone being run by Shannons Insurance

Please email [email protected] if you wish to enter the event and an entrant pack will be sent out to you

Stolen from here:

http://www.skylinesa...mountains-1000/

Get on board people this is going to be AWESOME! :)

  • Replies 134
  • Created
  • Last Reply

Top Posters In This Topic

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Swapped the injectors around and the misfire followed. I went ahead and ordered the Deatschwerks 550cc injectors and am currently waiting for them to be ship and arrive. In the meantime, I've had my Nistune soldered to the ECU. Tested it, and and tried it out with the software. Everything should be prepared for when the injectors arrive.  
    • Yeah they charge a little extra for mods , last year I noted no mods but I did have an exhaust fitted after that so  better to let them know cause these kinds of things can cause the policy to be void if you ever need to claim.
    • Hello, just just bought an 1999 enr34 with a stock rb25neo and I'm looking to upgrade the engine to 500whp I know some basic things but wondering if there are things I'll need to do to upgrade the stock block and all the bits and pieces to achieve this.
    • Thanks everyone for the replies and suggestions. Got the seats out (hoping I could find some existing grommets but no such luck). By tapping and measuring etc. I could figure out where I could drill through if needed. But first I borrowed an inspection camera and managed to go through factory holes in the chassis rail and could see that the captive nut was holding steady which is why it could retighten. So it was indeed a stripped section of thread, so I applied downforce by levering the bolt head with a screwdriver and went slowly back and forth until it came out. Camera helped a lot cos I could monitor that the captive nut was holding tight. Now I just have one very seized main subframe nut to tackle 😅
    • BOVs do have a purpose, if you ever log pressure before and after the throttle body, you will see a spike pre throttle on lift off from a WOT condition. Enough to bend throttle blades / damage e-throttle motors or simple assist in blowing off cooler pipes. FWIW, the above on really applies to those running at least 2 bar of boost. OP shouldn't have an issue, on the other hand, here are some videos of my shit box over a decade ago with some succulent dose with the airbox on and off. That shit box is unrecognisable these days 🫠    
×
×
  • Create New...