Jump to content
SAU Community

Sedan Front Lips

..350GT8..
 Share

Recommended Posts

Deep Dish V35 Experienced

Deep Dish V35

Posted
Posted

this wont answer your question but it is on topic...

I have chosen with my past few cars to make my own

using off-the-shelf 4wd rubber wheel arch extensions that are meant to be mounted horizontally, i just hang them under the bumpers instead. flexable and forgiving.

this is how it mounts on 4 wheel drives

cfcaea6a.jpg

i mount it this way up

6bceba92.jpg

would look better with the series 1 lower half colour coded.... but you can still see the difference

93111c79.jpg

b01abfb3.jpg

same on the rear

6904e3d2.jpg

Deep Dish V35 Experienced

Deep Dish V35

Posted
Posted (edited)

for rubber, in SA we have Clarke Rubber who sell it off the roll by the metre. $20 per metre i think, so $40 to do the front (plus whatever you need to fix it to the car - one screw or bolt plus a large mudguard washer every 150mm or closer)

im sure any 4WD accessory shop sells it for about double the price

444.jpg

Edited by Deep Dish V35
n15m0 Grand Master

n15m0

Posted
Posted

I've got the series 2 lip and can confirm they are different from the Coupe. I sourced mine from Yahoo auctions in Japan many years ago. They are also available from US and also japanparts.com but be prepared to pay through your nose upwards of $600 landed. If you can find a 2nd hand one from Japan it would be much cheaper.

Deep Dish V35 Experienced

Deep Dish V35

Posted
Posted (edited)

Cool.. Thanks guys.. Think I'll stick with deep dish's $40 Clarke rubber.. Lol much cheaper and at my ride height probly more affordable to replace later when needed also...

this stuff is heavy duty. you'd sooner tear the whole bumper off before damaging the rubber.

it flexes back under the car easily, but if you get it caught when reversing you'll feel it. those concrete blocks in carparks are a pain. just remember to always reverse park if your mufflers are high enough

my front lip has dragged on various things and not even scratched. a quick squirt of silicone spray makes it shine (and possibly reduces wind friction by 0.00000000000000000000001%) baahahaha

oh and you could mount it so that it points slightly outwards, rather than directly down like mine.

and before anyone says it, yes i know this lip is not to everybodys taste. its just an option.

Edited by Deep Dish V35
..350GT8.. Enthusiast

..350GT8..

Posted
  • Author
Posted (edited)

Just curious..ur username says 350GT8..is that the car you are referring to coz I don't think GT8s came in series 2...

yeah.. ive got a 350gt8.. im not really sure what series it is.. tried searching online.. and all i could come up with was its a 1.5 model.. lol.. its one between the cross over of series 1 and 2...

ive got series 1 interior, headlights, grille, series 2 tail lights and front and rear bars and bootlid (without doggy handle). ive had the car for almost 2 years and up til now still dont know.. previous owner said same as what i found and read online.. " its a 1.5" i dont really know..

if anyone can shed some light on this would be good... sorry way off topic though..

Edited by ..350GT8..
itsRICHARD Collaborator

itsRICHARD

Posted
Posted

Anyone know if the 2007-2008 G35 Sedan OEM Factory Front Lip would fit a 2004 V35 300GT?

There's one for sale on ebay

http://www.ebay.com.au/itm/INFINITI-OEM-FACTORY-ACCESSORY-FRONT-CHIN-SPOILER-LIP-G35-G37-4-DOOR-2007-2009-/261059090847?pt=Motors_Car_Truck_Parts_Accessories&hash=item3cc855999f

Not too sure how it would look on the 300GT if it did fit though

Deep Dish V35 Experienced

Deep Dish V35

Posted
Posted (edited)

the biggest giveaway in that pic is the headlights. Boomerang shape is V36 equivalent

im not 100% on this, but ...

2001-2005 v35 in japan = 2003-2006 g35 in US

I know for sure mine is 2001 JDM series one so i look for 2003 USDM parts to get series one, or i look for 2005 USDM parts to get series 2

if the headlights are different shape, you can be certain the parts wont fit.

edit- isnt there a topic that explains the year model jap-usa conversion in detail?

Edited by Deep Dish V35

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Ticking Sound On Idle - Rb25

      By MBS206 · Posted

      Have you put an aftermarket oil pressure gauge on and verified your oil pressure?   Noise being on the block, on exhaust side, how high up the block does it seem to be? It could be the VCT system getting cranky, especially if it's mainly at idle, and when warm, as that'll be your lowest point for oil pressure. Could be showing that oil passages / VCT solenoid are blocking.
    • WARLORD
      injectors top feed for sale

      By WARLORD · Posted

      Deatschwerks 1800cc sold
    • GTSBoy
      Ticking Sound On Idle - Rb25

      By GTSBoy · Posted

      Well, hydraulic lifters will get noisy if they are dirty/fouled in some way, and exactly how that manifests will depend on exactly what schmutz is where. There is a procedure on here somewhere for dismantling and soaking/cleaning them. Replacing them with new is about 50% of the work and about 5% of the money!
    • myrbgivesmeheadaches
      Ticking Sound On Idle - Rb25

      By myrbgivesmeheadaches · Posted

      Thanks for the reply @GTSBoy this is is a hydraulic lifter engine. Yea right i did not realise the lifters were supposed to be compressible while installed. I could push them down but i had to lean almost my while body weight on them.  I have never heard of a lifter/ lifters ticking only at hot idle and getting worse the hotter it gets. I have owned a few jdm cars with noisy lifters. This noise is slightly more subtle, it is more of a sharp gentle metalic tic than the solid and more loud tapping I've heard on lifters. I have used a metal rod, alloy tube, hose and stethoscope and could not find the source of the tick. But it appears to be loudest on the actual engine block behind the exhaust cam gear and next to the oil filter. I had mate (40 year old mechanic) go over it with me and he couldn't find it either..  Could it be a cam seal issue of some sort?  Cheers  
    • GTSBoy
      Ticking Sound On Idle - Rb25

      By GTSBoy · Posted

      This seems problematic and unlikely at the same time. Vanilla RB2Xs have hydraulic lifters. They do have "zero" clearance, but only when running with oil pressure inside them. When not running, you should be able to compress them and obtain heaps of clearance. RB26s and Neos have solid lifters. They should have ~0.3mm and ~0.5mm on the inlet and exhaust respectively. If they have zero clearance then bad things are happening. With nothing else being wrong, it would mean that the valves would be held slightly (ever so slightly) open when they are supposed to be closed and it should have all sorts of problems when running, caused by leakage in/out through the valves. Or, zero clearance can indicate severe valve seat recession. None of it is good. Have you used a piece of hose as a stethoscope to try to localise the noise?  
×
×
  • Create New...