Jump to content
SAU Community

R32 Gtr Rb26 Few Bits

r14
 Share

Recommended Posts

r14 Collaborator

r14

Posted
Posted

Hi guys I've got a few bits and peices I want sell

I have a pair of grex( greddy)272' degree cams 9.7mm lift asking $500

S14 rb26 convertion new nismo mounts and engine mounts made full race USA

And 2 dump pipes and engine pipe asking $400

Nissan gtr 32 n1 boot lip ok condition $80

R32 gtr side skirts early type missing gaurd moulds asking $100

R32 r33 gtst stainless dump pipe asking $70

R32gtr rolling shell no front panels /had rear end diff doors boot etc non complied asking $700 Ono

That's it for now iam open to reasonable offers

Sorry cant upload pics as iam only on the iPhone

Please call or text for info or pictures

Or pm as I don't come on Here much any more

Iam also considering selling a spare rb26 complete head , but no cams

Or injectors but every thing else , let me know

Link to comment
https://www.sau.com.au/forums/topic/404007-r32-gtr-rb26-few-bits/
Share on other sites
r14 Collaborator

r14

Posted
  • Author
Posted (edited)

Make an offer! Need some cash to buy more cars

Parts up date !!

R32 stock ecu works fine $80

Gtr boot lid white good nic $50

R32 late doors both sides good nic $90 each

Mines after market air filters and carbon cover bolt on to air flow meters

$120 good nic

Gtr dash cluster 109000 kms $50

Triple gauges 2 sets $80 for both

R33gts-t stock fuel pump works well $50

Set of 4 bilstein after market suspension lower and stiffer than standard still good $100

Many more parts cleaning out the shed

Edited by r14
  • 3 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      NC MX5

      By Dose Pipe Sutututu · Posted

      LOL.... fk...   there goes 25K to make 200kW
    • dbm7
      R33 GTS25 NA - Stalling when vehicle is at operating temp

      By dbm7 · Posted

      For sure the later RB26 variants had a different setup (6 cam voltage sender?), but the RB25DE/DET share the same ECU pinout/PCB footprint, and at the ECU plug it ends up being 'throttle sensor in' & 'throttle sensor out' (to A/T TCU) ...you stick a multimeter on these pins and you'll find them directly connected (0 ohms) ; I had an pair of Nissan ECUs on the bench long ago, and I noticed this throttle sensor in/out link, actually linked to an op-amp ...which was unpopulated on the NA board, but present on the T board and I went 'ah-ha!' in some moment of clarity... ...it wouldn't surprise me if they changed strategy here though (in the software and actual monitoring of this signal), because they did with other stuff (A/T signals).. and 0.45v as a trigger point makes sense, as that's what the external TCU units expect at idle ; kudos, thanks for that insight...I suppose it boils down to whether or not Consult can display real time data of that signal's voltage... ...in any event, it presents the same target...ie; rotate TPS unit to achieve 0.45v to suit both ECU&TCU, and where do you goto from there? Just disconnect TPSwitch connector and/or that plus TPSensor connector....or do you go for the throat and disconnect IACV solenoid and see if it still stalls? (probably throws a recoverable fault code and goes for default idle strategy?)...
    • PotatoCake
      Exhaust silencers/varex exhausts

      By PotatoCake · Posted

      I’m also conscious that e85 is slowly being phased out. Not all United’s have them anymore. Can’t take the risk of being low on petrol and assuming the servo will have it. 
    • The Bogan
      NC MX5

      By The Bogan · Posted

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      MR HAMMER has said his piece. Painted up to avoid Rusty Rusty. Actually lines up well. (i.e it lines up the same as the unmolested GTR guard). Turns out the GTR Strut brace does foul on the bonnet vents ever so slightly. May need a little bendy bendy if intended to keep using with a strut brace. So spacing it out to clear the FAST102 is not an option. Annoyingly, the bonnet vents also foul on the heater lines running over the engine. Given this engine does not EVER require a heater, a delete loop is going to be used. Don't worry, the defogger uses the AC. The heater is basically "Do not use the aircon and turn the fan on". It will still be effective, I promise.... once I get the system regassed... Will have to revisit with unvented bonnet I suppose, and suitable strut brace. There's plans to do this and other things tonight and bleed brakes (there was a weep) and put the bumper back on, and take Good Friday morning - Because troubleshooting on the side of the road limping it home at midnight tonight is ... not very smart.
×
×
  • Create New...