Jump to content
SAU Community

Nistune Help Injector Install

Marcus89

By Marcus89,
in Queensland

 Share

Recommended Posts

Marcus89 Proficient

Marcus89

Posted
Posted

I am planning to install injectors soon and was hoping someone local to me (Southside Brisbane near Garden City shops) may be able to help me out.

Basically I'd like someone who has nistune software and cable to just adjust my already Nistuned ECU to suit the 550cc injectors and possibly the z32 afm (although this isn't really required already adapted both afms and wiring with crimp on plugs for easy swap).

Link to comment
https://www.sau.com.au/forums/topic/404265-nistune-help-injector-install/
Share on other sites
Marcus89 Proficient

Marcus89

Posted
  • Author
Posted

I am going to get the car fully tuned basically straight after injector install I would just prefer to drive it to the tuners. I thought it would be possible to do a basic tune or even a map for larger injectors that nistune people have already put together just to limp it there?

MagicMikeZ32 Veteran

MagicMikeZ32

Posted
Posted

Won't need a full tune if you are only changing injectors. Just a kvalue and probly latency change.

What ECU/car have you got?

I have the software and OBD1 cable, just a bit out of the way. Could do it friday on the way home from work, possibly on the weekend.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      The Ls1 R33 Of Fury

      By MBS206 · Posted

      Well, turns out not a lot happened from back then to now, between life again, and working on 3 separate other cars (only one of which was mine, and will now be departing the household soon).   So I decided with the whole "don't go outside, it's a cyclone!" Turning in to being not a whole lot, I ventured down to the garage, found a couple of water leaks in the shed (the main one I've already fixed), and then ended up "stuck" as it started pouring rain, and I didn't want to walk back inside in the pouring rain. This meant I ended up taking a look at the Skyline, and trying to work out what past Matt had been upto. I retraced a few things out from scratch, added the rest of the power feeds in that I needed for the indicators, and headlights. Double checked I'd wired a few things up correctly (and worked out how I wired a few things to begin with), updated my sparse notes. Added one of the ground points. Oh, and got really really dusty, as the car is quite dirty. Wrote up quickly what should be left for me to do with the wiring too. Adding the below photos more for my records than anything else. I need to make myself a proper book for the car that details everything, and how I've done it, but for now, this is my records... The third image is my most important one for me, and I need to draw it out into a proper schematic eventually. The last photo is my re-written list, I'd have put it on the white board, except I had to take the white board down to fix one of the water leaks.
    • niZmO_Man
      R33 rear seatbelts

      By niZmO_Man · Posted

      Can try Maxima. Or random Infiniti models from the same era. Good luck with your hunt, let us know what you find!
    • niZmO_Man
      Duncan's V37.......race car?

      By niZmO_Man · Posted

      Shall we... wake you up when September ends?  
    • niZmO_Man
      Replica built of first Gibson R32 chassis

      By niZmO_Man · Posted

      I got the Repco video recommended on YouTube.  
    • niZmO_Man
      Hello friends

      By niZmO_Man · Posted

      Welcome Mark. Do you have a Skyline or are you looking to get one?
×
×
  • Create New...