Jump to content
SAU Community

Recommended Posts

On my R34 GTR, I paid for and had installed a stock set of bilstein B16 PSS9 coilovers (specifically for R34) part GM5-8075-MO

Unfortunately i don't like the ride much. Set to minimum damping - bouncy as hell (rear mainly). No surprise there.

But even on maximum damping, they are still "bouncy".

I can't speak for how well they handle, not having tracked them, but take the smoothest freeway surface you can imagine, but with the normal very gentle undulations. Now drive at 60 to 80kmh on it, and my head is bouncing off the back of the headrest, and the car has the jiggles, and I'm going up and down in the seat slightly. From outside you wouldn't tell, it isn't riding like a car with shot shocks, It just feels .. bouncy, on a small scale.

The resonance is worse with certain surfaces and speed ranges. Going faster is ok.

My experience so far has been S-tunes .. no bounce & Ohlin Flag-R .. harder, much more direct connected feel, but still less bounce than the PSS9

Is there a front-rear setting I should try?

Also, at very low speeds eg in carparks, they click clack a bit from the front you can provoke that noise with the steering. Everything is torqued down right - I am told.

Edited by moneypit
Link to comment
https://www.sau.com.au/forums/topic/404345-new-stock-bilstein-b16-pss9-bouncy/
Share on other sites

No idea about that specific application. Do you have the stock spring rates? Maybe this application wasn't well sorted ? PSS9 generally rate quite well for ride quality. They are typically compared to KW coilovers which are also considered pretty good for the money.

If I had to take one guess I'd say the damping is fine but you are just used to overly firm dampers. Ride quality is very subjective. Not having a go.

  • Like 1

The kit is specifically for the R34 and comes with springs, so I suppose it was right.

I'd agree that i may have got used to the Ohlins EXCEPT that I did a couple of thousand clicks on s-tunes too, and did not have a complaint. They have much lower spring rates than the Ohlins.

I'd have expected the PSS9s to be close to s-tune suspension, instead they feel worse at the moment than both the track-oriented flag-R and the S-tunes, (and stock as well).

  • 1 month later...

I recently got some PSS9's as well and yes, I know what you are talking about. I'm getting the same bouncy feeling as you, only in the back and I have dampers on softer setting.

Seems like the setup of the rear shocks is not quite right...

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Huh, wonder why it blew then. I never really beat on the car THAT hard lol I dailyed it and the turbo blew after 6 months
    • That's odd, it works fine here. Try loading it on a different device or browser? It's Jack Phillips JDM, a Skyline wrecker in Victoria. Not the cheapest, but I have found them helpful to find obscure parts in AU. https://jpjdm.com/shop/index.php
    • Yeah. I second all of the above. The only way to see that sort of voltage is if something is generating it as a side effect of being f**ked up. The other thing you could do would be to put a load onto that 30V terminal, something like a brakelamp globe. See if it pulls the voltage away comepletely or if some or all of it stays there while loaded. Will give you something of an idea about how much danger it could cause.
    • I would say, you've got one hell of an underlying issue there. You're saying, coils were fully unplugged, and the fuse to that circuit was unplugged, and you measured 30v? Either something is giving you some WILD EMI, and that's an induced voltage, OR something is managing to backfeed, AND that something has problems. It could be something like the ECU if it takes power from there, and also gets power from another source IF there's an internal issue in the ECU. The way to check would be pull that fuse, unplug the coils, and then probe the ECU pins. However it could be something else doing it. Additionally, if it is something wired in, and that something is pulsing, IE a PWM circuit and it's an inductive load and doesnt have proper flyback protection, that would also do it. A possibility would be if you have something like a PWM fuel pump, it might be giving flyback voltages (dangerous to stuff!). I'd put the circuit back into its "broken" state, confirm the weird voltage is back, and then one by one unplug devices until that voltage disappears. That's a quick way to find an associated device. Otherwise I'd need to look at the wiring diagrams, and then understand any electrical mods done.   But you really should not be seeing the above issue, and really, it's indicating something is failing, and possibly why the fuse blew to begin with.
×
×
  • Create New...