Jump to content
SAU Community

Recommended Posts

Gday guys trying to trouble shoot, my alarm/immobiser.

The M80g has been fitted to run with my external HKS timer. If i dont use the timer or wait for it to turn off then it works properly (immobilises/alarms)

However i turn on the turbo timer, i get out it still runs and i can lock the doors and once the car has finished running it will turn off and immobilise but it wont arm the alarm, the remote doesnt beep.

As i didnt install it i dont know if its a feature i need to enable or its been wired wrong.

Cheers

Patrick

read the booklet. I have the m60s and whil playing with it, mine locks and immobilises when turbo timer time has finished. Besides, its wank, just disable it.

Been reading the book, AND if you had a genuine Manual like i do you will find it actually says if you got 100kph to let the car idle for 30sec or if 100kph and slopes or +100kph to let the car idle for 1 minute.

No need to get a big head about it. Its hard to sit in the car for 30 seconds

Cool story brosef, the immobilser has the ability to interface with an external timer, was after solution not your opinion, ttys xoxo
  • Like 1

So i guess my real question is, how do you programme the alarm to interface and arm with the external timer, the booklet i received and pdf i got off mongoose do not clarify this.

cheers

Okay problem SOLVED!

If you have a 2012 plus models does not with programming!

If it has been wired correctly donwloading the pdf directly from the mongoose website. Have the car locked and unlock it, with drivers door open quickly turn key in ignition 15 times "as fast as possible" and then turn back to ACC. Count the beeps to make sure you got 15, then if so press button one. Wait ten seconds for a three chirp confirmitory. Kick over car with timer on and try locking it holding down button one, if it locks with a beep you will have success!

Edited by Pattey21

Why would you run the HKS turbo timer when the M80G already has one. That's like noob step number 1.

you must know everything, ill come staight to you next time. Externals timers are more user friendly as you dont have to re-programme it everytime you want to change timer duration.

you must know everything, ill come staight to you next time. Externals timers are more user friendly as you dont have to re-programme it everytime you want to change timer duration.

Cool story hansel. :P

I think people need to start realising that when you come on a forum that you will get mixed responses from vast community/background/age group of forum users.

But seriously, good for you figuring it out. So does it lock and re imobilise the engine when the timer has run out?

Have you sat in the car and tested it? Does the car switch off and imobilise when the door is opened while the timer is running?

Cool story hansel. :P

I think people need to start realising that when you come on a forum that you will get mixed responses from vast community/background/age group of forum users.

But seriously, good for you figuring it out. So does it lock and re imobilise the engine when the timer has run out?

Have you sat in the car and tested it? Does the car switch off and imobilise when the door is opened while the timer is running?

haha. Yeah it works and arms properly now. Its stupid how the books doesnt include the programming from 2012 onwards. It mentions the features but advises to contact installer to do any.

it was removed for a reason. those units are sold in 3 countries and NZ did not want it in there.

I too remove T'timers. makes the car entirely too easy to steal.

and before you even think of giving me a serve do a search on who I am :)

it was removed for a reason. those units are sold in 3 countries and NZ did not want it in there.

I too remove T'timers. makes the car entirely too easy to steal.

and before you even think of giving me a serve do a search on who I am :)

Jebus?

it was removed for a reason. those units are sold in 3 countries and NZ did not want it in there.

I too remove T'timers. makes the car entirely too easy to steal.

and before you even think of giving me a serve do a search on who I am :)

your just a big D@#K head thats who you are......kidding.

Thats actually a really good point just bridge the igntion it at the timer plug and either roll start or tap into starter and your away. something ill have to think about

Is there something i can do to make it harder to steal besides hiding/ attempting to armour the wiring?

Edited by Pattey21

good at making friends aren't you :)

in short - piss the timer off and sit in the car for the extra 30 sec. 30 sec out of your life isn't going to hurt you.

mind you I could probably still take the car anyway. most people dont give a rats about alarm install so its probably very obvious and easily bypassed..

good at making friends aren't you :)

in short - piss the timer off and sit in the car for the extra 30 sec. 30 sec out of your life isn't going to hurt you.

mind you I could probably still take the car anyway. most people dont give a rats about alarm install so its probably very obvious and easily bypassed..

My mate who installed it is a electronics tech and before use to be in the trade of doing alarm installs so its proabably well hidden. However in saying that he neglected to tell me the issue of a timer compramising security.

Thanks for the info Chris i appreciate it

Edited by Pattey21

*Thread hijack

So would this mean that my security is compromised since my turbo timer (which I actually use as a boost gauge) is still in the car, Chris?

Or was there something done to the wiring to make it that much harder to steal?

Oh its my turn to shite shir haha Been a while

Your ghey turbo timer is a adr defect ( but I'm sure you dont care!) but it must time how long you wank off ...so the 30 seconds is enough to cool off ? or set for 1 min so the oil has time to cool off and not stick to your palms

But its good to know your master mind fixed it " gold star to you "

In the future ask questions with some respect to the ones trying to help you ffs or expect a ban stick off SAU

A lot of people on SAU have skills well beyond what you could even imagine and help people in need if asked polite !! instead they could say FU pay someone to fix it !!

So chill out

Even if you dont agree show some respect for your fellow sau members

End rant , waits for bitchfest so the ban stick can come out

The question is a nissan is a soft target ( crime in japan isnt rampant like here) multi layered approach to security and even a 10 buck club will slow them down and stop joy riders

Gps tracker is a must on any decent cars and even that isnt a magic fix

Common sense is one major prevention of theft

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I am being real ocd and do not want to make amy mistakes so appreciate all help provided. I am overly cautious so asking for opinion even if i know the answer   few questions,   1.re tensioner, should spring be greased lightly?    2.tensioner has two washers , one pressure washer and other has recessed/ seat. I am going to put the recessed one facing tensioner where edges are cut out and pressure washer on top   3. my car has custom triger kit sold few years ago by guy who initially built the engine. I moved the crank gear and it moved in and out easy, only way to remove belt is to slide the crankshaft gear forward which I did. I have seen these being very tough to move , anything to do with my woodruff key?   it has a crank sensor shown in purple which I assume reads from the 12 teeth position mounted to the crankcase gear   4. timing belt doesn’t have arrow stating front or back just a arrow which I think is direction of rotation . Do you agree?   5.i figured out why my crankcase cover was worn as there was no washer installed over the crankcase cover before the harmonic balancer was put in place. It is missing, anyone knows the part number? It looks like this https://justjap.com/products/genuine-nissan-crankshaft-timing-gear-rear-plate-washer-nissan-s13-ca18-a31-r32-rb20-r33-r34-c33-c34-c35-rb25?currency=USD   https://tinypic.host/image/IMG-4535.382Zy2 https://tinypic.host/image/IMG-4537.382dSz https://tinypic.host/image/IMG-4534.382q4U  
    • CTIS (Central Tire Inflation System) has existed since the 80's. I'm looking into buying a Hummer H1 and they generally included it. 
    • My idle is set at 950rpm though - Moving the timing around 20 degrees is not really what I'd call a calm idle. That said... neither is chop, by definition. The LS ECU likes to adjust timing to hold idle as opposed to air. It'd work, but generally speaking there'd be a discrepancy in the base idle and the IACV would want to move the timing around anyway to maintain said idle. I think I'm just going to keep the timing steady anyway. Preserve my engine mounts.  My aircon is now officially regassed. As the guy was reversing I noticed my reverse lights do not operate, along with my reverse cam. This is a bit distressing, because 100% of guides talk about which wire to connect to backup cams as "the goes with the [other color] wire". Often when doing conversions. Unfortunately the R34 colour wires aren't documented Unfortunately I had a T56 Magnum gearbox with it's reverse switch, which also isn't documented. Unfortunately there's definitely not documentation for people with both of these in the one car. Unfortunately I forgot. After many hours of this, I have a reverse cam and reverse lights again. The wire going through the trans tunnel to the reverse switch had broken. Upon inspection, it looks like this one wire had about 7 spade terminals and extensions in it.. for reasons I cannot possibly comprehend. I also spent the 750 hours required to clean up the wiring behind my head unit which now looks like this: This is a monumental improvement relative to what used to be there WRT triple gauges, head unit, traction control, wideband controller, and whatever the f**k OEM stuff still exists there in various states of connectivity/needed. Next step is to check in at the Exhaust shop to see/confirm how much clearance I have, to decide what mid mufflers or 'resonators' (which are just straight through, narrower mufflers) I can add and hopefully cut out a lot of exhaust leaks, pinhole, v-band or otherwise. But first step will be to 'take a look' before the next step.
    • Fark the AFM card and Nistune, Haltech Nexus S3, DBW, cruise control, flex fuel, dis dat.  
    • It's most likely the bolt/bush where the cover bolts back wore and allowed cover to move forward.
×
×
  • Create New...