Jump to content
SAU Community

Need To Drop Decibels! Exhaust Question

FLUID

By FLUID,
in General Maintenance

 Share

Recommended Posts

FLUID Enthusiast

FLUID

Posted
Posted

Hey, I've got a r33 na with an x-force cannon (4 1/2 inch) and want to get it quieter with less vibration that hurts your head after a while. I've installed the silencer and that's done alot but want to hear any ideas of fiberglass, cotton etc inside the cannon to get some quietness. Thanks

scotty nm35 Grand Master

scotty nm35

Posted
Posted

A Varex muffler would help, they are one of the best sound deadening mufflers I have found so far, and then you can close the flap to silence them if you need to. My 3.5 inch one doesn't drone much at all.

cherring Proficient

cherring

Posted
Posted

A Varex muffler would help, they are one of the best sound deadening mufflers I have found so far, and then you can close the flap to silence them if you need to. My 3.5 inch one doesn't drone much at all.

How did you set up the boost actuated Varex???

scotty nm35 Grand Master

scotty nm35

Posted
Posted

Does anyone in here have a car that can't be defected? At the end of the day the goal is to not be pulled over, the impression of a stock car is the key imo.

Unfortunately there are no aftermarket mufflers I can recommend to reduce noise to a legal level other than the closed Varex. Other than that you would be best off finding a S/H jap cat back with a Jasma label.

I have gone back to the Varex motor on mine as the varex valve was too tight and kept jamming. There are other options I am trying at the moment.

post-63525-0-09171300-1342655810_thumb.jpg

cherring Proficient

cherring

Posted
Posted

Does anyone in here have a car that can't be defected? At the end of the day the goal is to not be pulled over, the impression of a stock car is the key imo.

Unfortunately there are no aftermarket mufflers I can recommend to reduce noise to a legal level other than the closed Varex. Other than that you would be best off finding a S/H jap cat back with a Jasma label.

I have gone back to the Varex motor on mine as the varex valve was too tight and kept jamming. There are other options I am trying at the moment.

Exactly, I think even my FMIC can defected can't it, just don't fail the dick head test if you do get pulled over.

The boost controlled varex looks interesting, shame it didn't quite work, and am interesting in hearing what you come up with.

mad082 Grand Master

mad082

Posted
Posted

Does anyone in here have a car that can't be defected? At the end of the day the goal is to not be pulled over, the impression of a stock car is the key imo.

Unfortunately there are no aftermarket mufflers I can recommend to reduce noise to a legal level other than the closed Varex. Other than that you would be best off finding a S/H jap cat back with a Jasma label.

I have gone back to the Varex motor on mine as the varex valve was too tight and kept jamming. There are other options I am trying at the moment.

there are plenty. any exhaust shop could sell you about 10 different ones that would, but few people would want them on their imports as a: they aren't fully hektic cannons, and b: they aren't a straight through type (so don't flow as well). but even a decent flowing muffler used with a decent centre muffler will give you exhaust levels below the legal limit. a non performance orientated muffler will be built in the same way as a stock one and give the same level of noise attenuation

scotty nm35 Grand Master

scotty nm35

Posted
Posted

but even a decent flowing muffler used with a decent centre muffler will give you exhaust levels below the legal limit. a non performance orientated muffler will be built in the same way as a stock one and give the same level of noise attenuation

With a 3.5 inch system? You have to be kidding... Most of my customers want 300kw at least these days, with two free flowing mufflers. There aren't many on the market that cater for low noise along with the flow, especially in stainless.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Ah yes, but the part in my hand was actually painted and fitted by me! I knew any front lip was likely to be sacrificial but I've had to fix it twice already... by the time I buy a fibreglass fixing kit, sort out sandpaper blocks, buy some fibreglass filler, body bog, spend the time and effort for a 'Greg' result... a new one being $290 seems like it's the better way to go and spray that with bedliner/raptor coat and we're all pretty again.. Would have preferred it last more than a month though. Them's the breaks I suppose.
    • MBS206
      HKS stroker kit step 0/1 or HKS GTIII 2530

      By MBS206 · Posted

      I find it funny that the USA is finding out all this really really weird stuff, and people from the USA are coming here treating it like gospel, yet, all the info on solving those issues is here on these forums for the last 15 odd years... Also, I know how much heat it takes to ignite the hood lining of an R33 skyline. I worked it out myself... It also took a LOT of time, and heat for it to do it... Big single, and I needed to drive the car, so retarded the timing off to "protect it". Yeah, that was a bad move for cruising on a freeway with only 15 degrees of timing on it. That was a lesson I learned around 2009. So that's over 15 odd years ago. Aligning water and oil, that's identical for any turbo engine, it's not Japanese specific. If a shop doesn't know how to make sure the core is rotated the right way, then they shouldn't be touching any turbo engine. That's not a matter of "We haven't had Skylines for that long here"...
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      Sounds like it is rotational in the driveline. CV? Tailshaft CB? Also.....didn't you just pay to have that bit painted and put on the car?
    • GTSBoy
      R34 GTT idle problem

      By GTSBoy · Posted

      Yeah, when I dialled my idle down, given how much time I spent idling at the lights in traffic on my daily commute, the effect on overall fuel consumption was absolutely noticeable.
    • Dose Pipe Sutututu
      R34 GTT idle problem

      By Dose Pipe Sutututu · Posted

      Emissions, fuel consumption, heat, noise, etc. most likely.
×
×
  • Create New...