Jump to content
SAU Community

R32 Gtr Parts That You Want! Heaps Of Parts, Cosmetics, Engine, Intake, Coolers


Recommended Posts

Hey guys,

This is an add on from my previous thread! ALL ITEMS ARE IN SYDNEY, NSW, north shore area.

found here: http://www.skylinesaustralia.com/forums/topic/401193-r32-gtr-parts-oil-relocation-cooler-airbox-steering-wheels-trims-guards-34gtr-parts-also/page__st__20

I have added more parts and have taken pictures of eveyrhing for sale.

All items are for sale: first in best dressed, will not hold unless $$ is deposited and i will hold for a short time otherwise i sell it. Trying to get rid of all of these parts as quickly as possible. if they dont sell they go to my mates with 32 Gtr's or in the Bin when i move!!

So here is what im selling, prices are Neg but i am firm on some things, offer away, i have no need for any of these parts anymore and im looking to move house so it all has to go so i can fit my motorbike in my garage once again (it doesnt like the outdoors).

Ammendments have been made to show price drops:

R32 Gtr wheels 16x8 with MAXXIS MA-V1's (rubber about 85% all round, minimal wear, Wheels have slight rashing on all wheels, one wheel has the worst with a slight dent in the outer lip. These are perfect for track or to be fixed up, no structural damage, would cost minmal to get them all cleaned up and back to normal. $800 with tyres. Pick up only. or organise your own courier etc.

wheels4x.th.jpg

wheels3.th.jpg

wheels2m.th.jpg

wheels1i.th.jpg

Standard Airbox w/Snorkel in perfect condition w/Blitz panel filter -$300 $250, filter is in packaging brand new rrp is $80

airboxb.th.jpg

3" Silicon pipes x 2 $10 FIRM EACH These are free with some purchases!

CF dual gauge 60mm A pillar holder 32 gtst, gtr, Greddy make - $150 $120 BRAND NEW never fitted

CF parts below for R32 Gtr only, These are from Japan from Newera imports, THE REAL DEAL from Japan not from China, cost me good money PLUS the delivery.

CF N1 spats $400

n1spat3.th.jpg

n1spat2.th.jpg

n1spat1.th.jpg

CF intercooler ducts $150

intercoolerducts.th.jpg

CF exhaust guard $100

photo3om.th.jpg

East Bear mirrors / Aero mirrors, Electric, direct plug and play in to existing wiring for electric movement. Colour is black, they have slight blemish on the bottom of one of them, would idealy need a light sand and re paint to colour of the car or as is. $200

mirrors3.th.jpg

mirrors2a.th.jpg

mirrors1.th.jpg

R32 Gtr front mesh intercooler grille great condition, all tabs and clips are there and not bent (took me ages to get it off gently, great to repaint and cover your intercooler for a stealth and OEM JDM look $75

meshgrille2.th.jpg

Nardi Leather steering wheel with black backing (awesome condition used briefly) - $150 rrp is $350

R32 Gtr guard liners, Passenger side has a wear mark from rubbing tyres, could be plastic fixed and reused easily (defect if you dont have guard liners these are hard to find now - great condition otherwise, removed carefully) - $150 $100

photo4kf.th.jpg

guardliner2.th.jpg

guardliner.th.jpg

RB26 Twin turbo pipe awesome condition w/spare end side rubber pipe - $150 $100

RB26 Ported Manifold, professionally done, great OEM replacement with manifold gaskets in/out cost me quite a few $$ asking $220 for the lot. just cleaned and came up great!! will improve response and boost of standard /-7s ugprade etc. Great buy with the Dumps below for better on off response and driveability.

manifolds.th.jpg

R32 Gtr intake side intercooler piping (yes the big OEM rubber covered pipe awesome condition) - $150

$75

Cusco Driver side hard pipe intercooler pipe (Painted properly in high temp paint for a stealth look perfect condition) $60 $50

R32 Gtr rear mats, left and right + centre wrap over mat (hard to find, great condition and in 94 model styling) - $100 $50

matsf.th.jpg

R34 GTR intercooler, brand new condition (did 5000km as was a new OEM part, previous owner was reversed into by ute, he replaced it with OEM new and then upgraded to larger for drag application) i never fit it however made a cover for the O2 sensor so that R33 and R32 gtrs can use it. few fins are bent but its in un believable condition. - $420 with the O2 sensor bung alread on there, to then be direct placement in to 33 and 32GTR.

Race Pace adj cam gears (these are OEM made to last quality and are a stock look, proven reliability over durilium after market brands) bought for $358 will sell for - $300 never USED!

R34 Gtr V spec dump pipes awesome condition off GTR SEAN - $250 or extra if you want me to high temp paint them.

34dumps.th.jpg

HKS shifter R34/33/32 12mm thread type to fit R34 GTR, comes with space to make it 10mm so that will fit any 5 speed nissan will fit. These are ultra rare these days. chasing $65. brand new, has box, spare stickers for top of the shifter depending on pattern and is WHITE..

Will have more pics up later tonight!!

Link to comment
Share on other sites

Parts that have sold:

3" Silicon pipes x 2 $10 FIRM EACH These are free with some purchases!

CF dual gauge 60mm A pillar holder 32 gtst, gtr, Greddy make - $150 $120 BRAND NEW never fitted

CF intercooler ducts $150

CF exhaust guard $100 R32

Gtr guard liners, Passenger side has a wear mark from rubbing tyres, could be plastic fixed and reused easily (defect if you dont have guard liners these are hard to find now - great condition otherwise, removed carefully) - $150 $100

RB26 Twin turbo pipe awesome condition w/spare end side rubber pipe - $150 $100

Cusco Driver side hard pipe intercooler pipe (Painted properly in high temp paint for a stealth look perfect condition) $60 $50

Here are pics of the Nardi:

nardi2.th.jpg

nardi1.th.jpg

Link to comment
Share on other sites

BUMP!! have thrown in some price drops.. I NEED this stuff gone ASAP!! some items have gone a lot remain. plz send through offers if you have any most items now NEGOTIABLE!!!! NEED EVERYTHING GONE!!!!!!!!!!

R32 Gtr wheels 16x8 with MAXXIS MA-V1's (rubber about 85% all round, minimal wear, Wheels have slight rashing on all wheels, one wheel has the worst with a slight dent in the outer lip. These are perfect for track or to be fixed up, no structural damage, would cost minmal to get them all cleaned up and back to normal. $800 with tyres. $700 NOW. OFFERS!! Pick up only. or organise your own courier etc.

wheels4x.th.jpg

wheels3.th.jpg

wheels2m.th.jpg

wheels1i.th.jpg

Standard Airbox w/Snorkel in perfect condition w/Blitz panel filter -$300 $250 NOWWW $200, filter is in packaging brand new rrp is $80

airboxb.th.jpg

CF parts below for R32 Gtr only, These are from Japan from Newera imports, THE REAL DEAL from Japan not from China, cost me good money PLUS the delivery.

CF N1 spats $400 $380!!!!!!!!!!!!!!!!!!!!!!!!!!

n1spat3.th.jpg

n1spat2.th.jpg

n1spat1.th.jpg

East Bear mirrors / Aero mirrors, Electric, direct plug and play in to existing wiring for electric movement. Colour is black, they have slight blemish on the bottom of one of them, would idealy need a light sand and re paint to colour of the car or as is. $200 NOWWW $180 OFFERS

mirrors3.th.jpg

mirrors2a.th.jpg

mirrors1.th.jpg

R32 Gtr front mesh intercooler grille great condition, all tabs and clips are there and not bent (took me ages to get it off gently, great to repaint and cover your intercooler for a stealth and OEM JDM look $75

meshgrille2.th.jpg

Nardi Leather steering wheel with black backing (awesome condition used briefly) - $150 rrp is $350 NOWWW $130

RB26 Ported Manifold, professionally done, great OEM replacement with manifold gaskets in/out cost me quite a few $$ asking $220 for the lot. just cleaned and came up great!! will improve response and boost of standard /-7s ugprade etc. Great buy with the Dumps below for better on off response and driveability.

manifolds.th.jpg

R32 Gtr rear mats, left and right + centre wrap over mat (hard to find, great condition and in 94 model styling) - $100 $50 NOWW OFFERS OR GOING IN BIN!!!

matsf.th.jpg

Race Pace adj cam gears (these are OEM made to last quality and are a stock look, proven reliability over durilium after market brands) bought for $358 will sell for - $300 never USED!

R34 Gtr V spec dump pipes awesome condition - $250 NOWWWW $200

34dumps.th.jpg

HKS shifter R34/33/32 12mm thread type to fit R34 GTR, comes with space to make it 10mm so that will fit any 5 speed nissan will fit. These are ultra rare these days. chasing $65. $40!!!!!!!!!!!!!!!!!!!!!!! brand new, has box, spare stickers for top of the shifter depending on pattern and is WHITE..

Link to comment
Share on other sites

Pm'd mate,

BIG FAT BUMP ON ALL PARTS!!!

I really need these gone. plz send offers through, i do have prices in my head and in the post, so obviously low balling is just going to either get a snappy response or none at all.

thanks for those with genuine interests.

cheers JD

Link to comment
Share on other sites

-East Bear mirrors / Aero mirrors, Electric SOLDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDddd

Leather steering wheel SOLDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD

HKS shifter R34/33/32 12mm soldddddddddddddddddddddddddddddddddddddddddd

NEED ALL THE OTHER ITEMS GONE!!!

TAKING OFFERS ON:

-N1 Spats

-34 gtr v spec dumps

-OEM 32 GTR WHEELS WITH GOOD RUBBER

-32 Gtr adj RACEPACE cam gears

-32 gtr rear carpets

SEND ME OFFERS!!!!!!!!!!!!!!!!!

Link to comment
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • So next year I am looking at upgrading from my VE SS bomadore ute to something more refined.  I wanted to stick with a V8 but not anything German or Australian, either a coupe or a sedan. So if I wanted anything newish that limited my options to either the Lexus RCF which I quite like. But with the price they demand and a kid on the way a 2 door coupe is probably not going to be the best idea. The next best thing would be the ISF but the newest models are 2014 and commanding over 60k and even the older 2008 models in ok condition starting around 35k is kind of bullshit. So I figured if I could not have the noise I could perhaps make do with easy power. Enter the infinity Q50 or Skyline equivalent. The price difference between the 300 and 400hp models seems a bit crazy. Right now there is 300hp Q50 one on carsales from a dealer with 61km for 27k drive away. If I wanted to get a 400hp Red or 400R car the prices seem to start at 43k From my limited research it seems that the only differences are that the 400r/Red Red runs more boost and a more aggressive tune. There are are turbine speed sensors on the turbos. Has 2 pumps for the water to air intercooler. Runs an engine oil cooler. I'm guessing that the exterior trims might look a little more sporty as well. I had a lazy look for upgrades to bridge the gap on z1motorsports They have kits that upgrade the water to air heat exchanger as well as the coolant pump which should give a non Red/400r better intercooling temps than the stock Red/400r. I added an engine oil cooler with a thermostat as well to try and make things as close as possible. Obviously the ECU is going to need a tickle. Having not done much in the way of research they also sell a ECU flashing tool with pre loaded tunes that are supposed to boost the non Red/400R by 100hp which adds 1k USD to the cost. The total cost of the parts @ the current time including shipping and taxes worked out to be $4350 AUD. Personally I would rather get the car tuned on a dyno which would probably add more cost Assuming the worst that you got a workshop to install the new parts I would guess no more than 5 hours would be required in the worst case @ 5 x $150 per hour = $750 So the total cost could be around $5100 So for easy number 5k + 27K = 32k I guess that would leave some change left over to swap out the open diff and fit a LSD Any thoughts?      
    • Right, not sure why I thought it to be a lean spike. It might be fixable with modern card-style hot film MAFs which have some design features to avoid counting reversion flow but I've never tried it myself.
    • I did not realise this, I'll contribute more and earn my stripes and retry later. 
    • I'm only going to hassle you for posting links to images. It's against my policy to click links that could be some nasty payload. Sadly, you need to make 9 more posts before you can just stick the images directly in a post, unless @PranK sees this and bends the rule for you.
    • Hello,new to the group, I bought a R32 from auction recently, wondering if anyone knows the cars history, seems to have the usual go fast bits on it, plan is to do an engine swap- add 2 extra cylinders and 1 extra turbo. https://www.dropbox.com/scl/fi/i4rjmlzubjbwjtguh6f4s/IMG20241011140744.jpg?rlkey=q0lumm251377vknbqktfwrycq&st=7scvwx4e&dl=0 https://www.dropbox.com/scl/fi/ro24qmwzlczzlfsr4y05x/Screenshot_2024-10-10-10-49-23-90_9a2f5bb2149dae94cd1e190effc09b33.jpg?rlkey=oyguh26ttshlf04ccp48odf4v&st=xloae97b&dl=0   New to forums and posting pics, if links don't work, take it easy on me, 42yrs old and I tune carburettors!!  
×
×
  • Create New...