hydragundam01 Posted July 16, 2012 Share Posted July 16, 2012 (edited) Hi all I’m having problems with my remote locking the doors and releasing the boot via the remote as well. First the boot went then the driver’s door. Anyone got any ideas? Edited July 16, 2012 by hydragundam01 Link to comment https://www.sau.com.au/forums/topic/404830-v35-problems/ Share on other sites More sharing options...
Seano350GT Posted July 16, 2012 Share Posted July 16, 2012 Do you have a spare key with the central locking buttons on it? My key stopped working just the other day and the spare works sweet. Link to comment https://www.sau.com.au/forums/topic/404830-v35-problems/#findComment-6445443 Share on other sites More sharing options...
grae35 Posted July 16, 2012 Share Posted July 16, 2012 Have you checked the battery in the key. Sounds like it might be time to buy a new one. Undo the small phillips screw and prise open the two key halves. From memory battery is 3volt and if you have a multimeter should be a bit above this if still serviceable. I think mine was 3.06v last time I checked. Anything from 3.0v or below needs replacing. Link to comment https://www.sau.com.au/forums/topic/404830-v35-problems/#findComment-6445797 Share on other sites More sharing options...
hydragundam01 Posted July 16, 2012 Author Share Posted July 16, 2012 (edited) I have tried both remotes and it does the same thing, the funny thing is that the driver’s side door lock does not lock with the lock button only locks the passenger side, but if I manualy push the lock it works? I'll check the voltage of the battery's just to be sure. Edited July 16, 2012 by hydragundam01 Link to comment https://www.sau.com.au/forums/topic/404830-v35-problems/#findComment-6446365 Share on other sites More sharing options...
hydragundam01 Posted July 17, 2012 Author Share Posted July 17, 2012 I bought a new battery for the remote same thing happens, I think it may be electrical in nature Link to comment https://www.sau.com.au/forums/topic/404830-v35-problems/#findComment-6446777 Share on other sites More sharing options...
MiZZi D Posted July 17, 2012 Share Posted July 17, 2012 Are either of you able to post of photo of the key? I don't have the master remote anymore and need to get one.... I've been quoted $400, just want to know exactly what this key looks like as a starter. Link to comment https://www.sau.com.au/forums/topic/404830-v35-problems/#findComment-6446825 Share on other sites More sharing options...
V(35)Powarh! Posted July 17, 2012 Share Posted July 17, 2012 I have tried both remotes and it does the same thing, the funny thing is that the driver’s side door lock does not lock with the lock button only locks the passenger side, but if I manualy push the lock it works? I'll check the voltage of the battery's just to be sure. mine does the same thing it unlocks on both sides but doesnt lock the drivers side when pressing the lock button switch on drivers door.... and ive seen the same thing from another v35 coupe as well....also the electrician i went to said thats how it is with the japanese design, bemuses me though.... it should lock and unlock both sides... Link to comment https://www.sau.com.au/forums/topic/404830-v35-problems/#findComment-6446860 Share on other sites More sharing options...
hydragundam01 Posted July 17, 2012 Author Share Posted July 17, 2012 Well so far my boot and door lock don’t work but also my hazard lights don’t work ether maybe the BCM? Link to comment https://www.sau.com.au/forums/topic/404830-v35-problems/#findComment-6447093 Share on other sites More sharing options...
Vimana Posted July 17, 2012 Share Posted July 17, 2012 or a fuse. Link to comment https://www.sau.com.au/forums/topic/404830-v35-problems/#findComment-6447140 Share on other sites More sharing options...
hydragundam01 Posted July 17, 2012 Author Share Posted July 17, 2012 good question where is the fuse? Link to comment https://www.sau.com.au/forums/topic/404830-v35-problems/#findComment-6447174 Share on other sites More sharing options...
Marshan Posted July 17, 2012 Share Posted July 17, 2012 I'm having a similiar issue with the boot. Remote works with the doors but boot doesnt work. Is there a fuse for that? Link to comment https://www.sau.com.au/forums/topic/404830-v35-problems/#findComment-6447259 Share on other sites More sharing options...
hydragundam01 Posted July 18, 2012 Author Share Posted July 18, 2012 From taking apart the door I’ve found that there still movement in the actuator. From the looks of it I’ll need to replace that. Can you just buy the actuator or do you have to buy the whole assembly including door latch and cables? Link to comment https://www.sau.com.au/forums/topic/404830-v35-problems/#findComment-6448552 Share on other sites More sharing options...
hydragundam01 Posted July 22, 2012 Author Share Posted July 22, 2012 Can you just buy the actuator or do you have to buy the whole assembly? Link to comment https://www.sau.com.au/forums/topic/404830-v35-problems/#findComment-6453736 Share on other sites More sharing options...
Chris Rogers Posted July 22, 2012 Share Posted July 22, 2012 whole assy. I can source them. Link to comment https://www.sau.com.au/forums/topic/404830-v35-problems/#findComment-6454028 Share on other sites More sharing options...
Chris Rogers Posted July 22, 2012 Share Posted July 22, 2012 or a fuse. nah too easy without knowing key condition, car condition we are really guessing at what the actual issue is. by default these cars spit window motors and door actuators at will. fuel flap and boot release actuators do die but not that common like the other two. if you had a BCM fault then a door lock would be the least of your worries. Link to comment https://www.sau.com.au/forums/topic/404830-v35-problems/#findComment-6454036 Share on other sites More sharing options...
hydragundam01 Posted July 26, 2012 Author Share Posted July 26, 2012 whole assy. I can source them. how much can you source them for? Link to comment https://www.sau.com.au/forums/topic/404830-v35-problems/#findComment-6460206 Share on other sites More sharing options...
Chris Rogers Posted July 26, 2012 Share Posted July 26, 2012 email me : [email protected] Link to comment https://www.sau.com.au/forums/topic/404830-v35-problems/#findComment-6460917 Share on other sites More sharing options...
hydragundam01 Posted August 28, 2012 Author Share Posted August 28, 2012 Well it looks like it’s the BCM as the voltage that is being sent to the boot actuator is 10v for about half a second which is nowhere near enough to kick the electrical motor over that’s in the actuator. Does anyone have a diagram of the pin outs for the BCM so I can check voltage and grounding? Link to comment https://www.sau.com.au/forums/topic/404830-v35-problems/#findComment-6506491 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now