Jump to content
SAU Community

Recommended Posts

I've been searching the web - but anyone else done this to their m35?

http://www.m35stagea.info/forum/viewtopic.php?f=6&t=71&sid=cec6da8d85f44ea679f532f4348ed617

If so, which option did you follow? fuse or switch?

I am thinking of installing a switch to do this.

Link to comment
https://www.sau.com.au/forums/topic/404904-m35-from-awd-to-rwd/
Share on other sites

Is not possible with your car. Its only applicable to Series two cars with electromagnetic ATTESA.

NM35s have the fluid / pump system. Only option to go RWD is to remove the front drive shaft from transfer case to front diff.

I've been searching the web - but anyone else done this to their m35?

http://www.m35stagea...9f532f4348ed617

If so, which option did you follow? fuse or switch?

I am thinking of installing a switch to do this.

Did ATTESSA not play nice with your staggered wheels? :P

Did ATTESSA not play nice with your staggered wheels? :P

Boom! :woot:

no I haven't put the wheels yet - since you asked me that question - I am in constant research about it

I get mix information about running staggered wheels - but like I said I am already running staggered tyre

size, but I need more info - end of the day I will run it just looking for some alternative options :domokun:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • But, do I have to? 😬
    • While doing my tailgate struts I found some rust. Also replaced my bonnet struts. Such a cool satisfaction with that job.
    • So I removed as much as I could from both sides. The shop vac did a great job of clearing 99% of it. I got it all as clean as I could and then absolutely drenched the whole lot in the rust converter. Tonight or tomorrow I'll hammer it again. The cavity must be close to 400mm in length and surprisingly I was able to get it right to the back.  I'll quickly reassemble and then pretend I never saw it. I'll post pics (for me to ignore later) soon.
    • Yea she is a hoot to drive 
    • I have always resisted the urge to go silly. 8" wide wheels and street friendly spring rates? Check. (Let's not talk about the steadily increasing spread of spherical joints across my suspension!!) Stock turbo, run at 12 psi? Check. Lasted for~?10 years before it died. Highflow put on rather than seizing the opportunity to go G45. You don't need 300 rwkW, let alone the more massive numbers that seem to be essential these days, to have a car that is already way too powerful and fast for a streeter. ~250rwkW is fine. I've never exceeded 200, although I will sneak up above it if and when I manage to get my finger out and do what needs to be done to use the highflow's capacity. You don't need $10k worth of CF bits glued onto the outside. You don't need razor sharp ankle cutting front splitters. You don't need the car to be 2" off the ground. You don't need flawless paint, mirror finished wheels, brand new indicator lenses, etc etc. All these things just make the car impractical and will cause you pain when they get damaged, which is inevitable for a street car. A few nice additions are good. Good seats are good. A nice stereo is good. A/C is good! (46° on the road yesterday and my A/C is degassed again. Was moderately traumatic driving home!) The main reason I stick with a mildly modified old Skyline is that I have had it for >25 years, the mods are the rolling result of 25 years of things dying and being upgraded opportunistically, coupled with a few "just 'coz" ones. And I hate almost all modern cars. If I was a young buck starting out now.... I wouldn't bother. Cars have a few years left where there is any possibility of interest or fun. Thereafter there will be no such thing allowed or possible. Any time, money and effort spent now on a project would just be a waste.
×
×
  • Create New...