Jump to content
SAU Community

Recommended Posts

I like cops, they have a hard job dealing with idiots druggies and drunks, if I was a cop I think I would end up getting in trouble for belting all the mouthy idiots and the scum that are everywhere.

They drag dead and dying bodies out of cars, clean up the mess after some scum has bashed his partner or kids, chase down scum who bash people for fun or the money in their pocket, things like this give people a short amount of time for idiots, they put themselves on the line for me and my family.

Are you going to put yourself in front of a meth crazed junkie to protect my family ???

COPS ARE TOPS

The cops are taught to look at they way people dress and behave, if you are a hoody wearing pants down around your knees kind of guy then you will be looked at, same thing if you look punk, emo, goth, metalhead, are you from a poorer area wearing top dollar clothes, they look at stereo typical types of fashion, also your personal apperance has a lot to do with it, if you have bags under your eyes or look half asleep, have bad skin you will be looked at.

This is their job, this is how they work, when the cops are hassling you they do it for a reason, they wait for your reaction, if you get aggro or your facial apperance gets dark then they will push.

Simple psycology is simple.

Yeah well I no alot about psychology but some of these guys definety are on massive power trip and I'd definety say it's the nsw police force are the worst I've ever come across the Queensland force are definety alot more calm and easy going but look at the tossers in nsw so i don't blame half there hard add attitude u get spoken to like crap all day ya gonna talk to people like crap I happens to unfortunately roll into 2 police road blocks an the way i was spoken to was a joke police only have a right to enforce the law if it's broken they don't have any rights unless you break those laws but they need to calm

Down on the modification stuff chops springs and bald tires yeah ok but none of this over board shit it's the idiot p platers that makes us look bad in there fully sick commys bloody worst cars ever some of us love modifying our cars because it's a weekend activity for fun ya know new stereo lights it's like what awesome thing can I do next and yet sounds like the cops are going way over board but yet again I no some really decent cops that are bloody unreal fellers but some are crooked and need to get reported if it was for them idiots on tv dropping skids aca footage we would be fine thanks to them it's all gonna change

Ill put this forward as an example.

Driving down a road in the 33. I was doing 80, cop comes up behind me *pwooo* yay my face drops. (Not condoning speeding, it was near 11pm and I've just been driving for 2 hours, just wanted to get home)

Cop pulls me up,

Me: Good evening sir

Cop: Any reason why you were speeding

Me: No sir, just want to get home

Cop: license (handed over)

wait for about 2 minutes

Cop: (hands me a fine for doing 10 over) Have you got a engineering certificate?

Me: For what sir

Cop: For your wheels, exhaust and that gauge

Me: No sir, wasnt aware that I needed one for those modifications (I was truelly unaware)

Cop: We will have to get that checked out

Me: Ok (poker face)

Cop: But I'm a bit busy tonight (cop gives license and fine and walks away)

Bottom line

Yes Sir No Sir May I have another Sir

Don't worry to much about it,when you get old and drive a liner they don't even look twice at ya. :banana:

LOL, me to.

Most times I get pulled over the cops look in the window and go "um err, we are pulling you up for a random breath test" they then walk back to their car and get the thingie.

Some times they ask about the mods and I give them my folder with the rego, insurance, cams licence, engineers report, they then have a chat about the car, ask me how fast it is, I usually say "its pretty quick but it would be even quicker with a better nut behind the wheel, I laugh, they laugh, and then Im on my way.

Works the same when Ive been pulled in and the RTA are there doing vehicle checks.

Never a problem.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Hey was wondering if you ended up installing the R33 GTR speed sensor - I found one too and wanted to confirm it's a direct swap into the R34 6 speed?
    • After 23 years of owning a Skyline, finally had the latch go.  Followed this guide,  works like a dream again. Great Guide 👍
    • Hi all,   I’ve got the biggest lot of problems with my R33 GTS-T   It was a freshly rebuilt 25th anniversary RB25DET (plastic cas, neo cams) probably 6 years ago now   The engine was running so well but I fkd up badly and trusted someone I’d known for 10 years that was well known around Plazmaman for his welding and fab work. I added a lovely photo of some of his previous work. Not sure why my car was worked on by whoever did this shit     I’m normally someone who would never open myself up to something like this, I still can’t believe I did it. Trusting him literally fkd it all up for me. Everything has been a struggle, like it’s almost been 6 years that’s how much I’ve just on and off been trying to work it all out.    All I wanted was a car that danced down low, like full boost from around 3~3500rpm to redline, don’t really care what power it puts down (if it ever does) but I just wanted it to be quick to get on it.    He recommended the turbo to get, I picked Hypergear but he told me to get the front 4” with a T4 and 0.68 rear housing.    I was expecting all these beautiful welds, tidy fab work and paid for it to be ready to go to a tuner when I got it back.    I got a car back that was an absolute mess, I actually couldn’t believe it was my car anymore. I don’t think you could even call what he did welds, they’re disgusting.    So I stripped everything he touched off it and with every bolt I loosened it just got worse and worse.    I covered it and literally built and finished another car in the meantime but now it’s getting to the point where I really want my Skyline back.   Its a struggle because I paid him to do all this shit because I didn’t know how to and now I’ve had to try and figure it all out omg    Please excuse the bird shit horrible welds, I’ve got my show pony car and am so beyond dealing with this car I don’t even really care at this point.    If someone told me about what he did to my car I wouldn’t have believed them but it happened to me. It was unbelievable. He went missing, my car went missing, it came back missing parts, the straight af chassis rails bore the scars of being dragged up a trailer backwards, even the sandwich plate was bent. Everything was leaking and open to whatever fell into it, rounded off/ missing bolts, power steering oil and coolant everywhere, no gaskets, parts stolen off it, even managed to damage the sump pan.   Promised me he’d finish the car, knew what it meant to me, I paid him thousands and thousands just for him to trash it. He told me he was fully licensed and insured, come to find out he’d cancelled his ABN, so obviously no insurance. I had laid up insurance on the car and would’ve been covered but I was scared they would’ve written it off or because the business was no longer trading I’d still be liable.    He was supposed to:  New fully custom mild steam pipe exhaust manifold with turbo location moved from factory position to high forward mount. (I don’t know if it is a mild steam pipe, I’ve got a funny feeling the waste gate isn’t in a very good position and I don’t think the outlets off each cylinder are equal) 4” custom stainless steel dump with external gate (he re-plumbed it) Cut and shut OEM intake manifold with throttle reposition (I ended up doing the throttle reposition) Box in pod filter (left out) New 100cel catalytic converter (pretty sure it’s there but unsure if it’s 100cel) Front mount intercooler piping fabricated to suit (all smashed up and rusty holes where he was supposed to make it look standard where fmic piping passes through. I don’t even think my front bar is going to fit 🙄) Custom 5” intake pipe from pod to turbo (didn’t come with it so had to do something to make it work with the Z32 afm)   Engine: Full cylinder head service & machining  Brand new valves Precision upgraded spring kit Engine block honed New bearings  New piston rings  New ARP conrod bolt kit New ARP head studs Cometic head gasket VRS kit   ATR43SS2 ball bearing turbo 0.68 rear housing  Turbosmart 45mm external wastegate (got delivered to the fab bloke, I’ve got no idea what spring is in it, I’m assuming the one that came pre installed) Walbro 260 fuel pump  Nismo 740cc injectors (tested to 880) Spitfire coil packs GCG FMIC RB25DET manual 5 speed 4:11 rear diff   I’ve got an Apexi Power FC in it atm, I was hoping to just get it to operating temp to make sure everything was okay before towing to a tuner but it’s over-fuelling too much. I don’t think that’s going to happen so i think I’m going to get either a Link G4 or Haltech for it. What do you guys recommend? I can’t work out the power FC so just gonna give up on that one     It’s got an exhaust leak coming from somewhere I can’t see 🙄    The fuel pressure was steady but now it like drops from 40 to 20psi randomly (noticed this yesterday)    I’ll attach pics of the shit he put on my car and the engine bay now as it sits    I really just need some help, I need a tuner in Sydney I can trust, I’d like to be with the car while it’s being tuned if possible, I know it looks terrible but unfortunately I’ve just got to put up with it for now and fix the cosmetic stuff later   Do you guys think the manifolds are going to be okay? Or do I throw the exhaust manifold and try again?   I don’t even think these combinations are going to work tbh   I know everything I fitted was rated to be able to take at least 400kW but most rated higher    If you’ve gotten this far I really really appreciate it 🙏 I don’t mind if you trash me or the car, I made a rookie error and f**k I’ve paid for it. As you’ll see 🙄  
    • From everything I’ve heard you’ll be waiting a long time for  the parts to arrive 
    • Have you looked at the workshop manual?
×
×
  • Create New...