Jump to content
SAU Community

Recommended Posts

Hi All new event last sunday of every month. First cruise starts on the 29th July. Some awsome road and cars.

You are invited to the first event of Sydney Sunday Cruise!!

SSC will hold events on the last Sunday of every month starting on 29th June 2012. Events will include drives, track days, Dyno days and drag days.

All people from beginners to enthusiast with an interest in Japanese and High end Euro cars are welcome to attend. You do not need to have an invite to attend so feel free

to extend this invite to your families and friends who would also like to come. Cars you will be driving with include Skyline V35's, R33's, R34's, R35's, Supra's, Evo's, Rx7's, S15's, Ferrari, Lamborghini and Audi just to name a few.

Any funds raised at the event will be donated to the Westmead Child Hospital, so not only will it be fun morning but it is also for a good cause.

Coffee, prizes and giveaway's will also be avaliable at the start point in the morning.

EVENT:

CRUISE: The first event will be a 100km cruise to Wollongong through the Royal National Park and along the coast line stopping at the Novatel Hotel for breakfast and returning to Sydney after.

LOCATION:

We will meet at Dan Murphy's car park at 316 Parramatta Rd Burwood. We will stop once at a lookout around half way for a quick break (point F on cruise map) and then continue to the Novatel Hotel in Wollongong.

If you are running late or would like to join the cruise half way please check the cruise map for the route. While we will not be stopping until we reach the lookout in the nation park you are welcome to wait along the

cruise route and join as you see us go past.

TIME:

Meet at 8am - Leave at 8:45am.

Arrive in Wollongong around 10:30am

Breakfast at hotel 1 hour

Arrive back in Sydney between 1 - 1:30pm

COST:

While there is no cost to join the cruise we ask for a gold coin donation for the Westmead Child Hospital.

Breakfast is $30 per person paid at the hotel.

INFORMATION:

For more information check out www.sydsundaycruise.com.au or www.facebook.com/sydneysundaycruise

CRUISE MAP CLICK HERE http://goo.gl/maps/F17F

post-96708-0-43061500-1342840507_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/405238-sydney-sunday-cruise-29th-july-2012/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Incidentally, I also put v3 of the tune on the car and did an oil change from 5w20 to 5w40 to see how it affected oil pressure in the mid to high end. I'm still happier with the thicker oil and will stick with it, but clearly the system is happy with 55psi even if I'm not!
    • So the other thing I got sorted over the weekend was Z1 oil catch can install. https://www.z1motorsports.com/z1-products/z1-motorsports/z1-q50-q60-30t-baffled-oil-catch-can-kit-p-23546.html It was a good kit, most importantly it came with preformed silicone hoses in the right shapes rather than trying to bend/join regular straight rubber hose. It did come with crappy spring clamps not proper hose clamps so I ditched them On the down side, it is made for LHD cars and RHD cars have the main ECU harness running straight through that location, I ended up bending 2 mounting brackets so the loom is up against the brake master cylinder compartment wall to make room for it....otherwise everything fit without modification Intercoolers off on both sides, but there was enough room to get everything done without disconnecting (and therefore having to re-bleed) the coolant lines. Each is mounted with 4x 12mm headed bolts, plus in and out side hose clamps (7mm headed, nice) and 3 electrical connectors on the navigator's side which were a real pain to undo (probably for the first time in 13 years).   Also one of the mounting bolts on the driver's side was cross threaded, thanks Infiniti/Nissan workshop mechanics. On the navigator's side, the catch can plumbs into the factory hose that goes from the cam cover PCV back to the intake.  This is the 2 new hoses in place. All simples and direct fit On driver's side, there is a bracket provided that mounts to the throttle body, they even provide slightly longer bolts to allow for the bracket thickness which is nice (although, they don't have captive washers like the factory bolts of course) In that pic the main loom brackets are not in place, once I had "adjusted" them across it now sits up against the panel and just clears the OCC The remaining problem with this is emptying it; currently you have to remove the 3x m4 bolts that hold it to the bracket and both banjos to remove it (probably dropping the banjo washers at the same time) pull it apart to empty then replace. I do have some fittings coming for a remote drain from underneath that will also add a little capacity...it is very small and will need to be emptied every oil change to be sure.
    • Noise sounds to me could be either wheel bearing related (have had similar from bearings going) or that tail shaft is still loose. Or something like a heat shield touching the tail shaft.
    • You wouldn't get away with saying the opposite, if you were there.
    • Do some wool fluff testing on the vents
×
×
  • Create New...