Jump to content
SAU Community

Hks Fuel Rail Fitting

Hanaldo

By Hanaldo,
in Engines & Forced Induction

 Share

Recommended Posts

Hanaldo Grand Master

Hanaldo

Posted
Posted

Hey all,

I posted this topic awhile back in the cosmetic section, no idea why lol, it made sense at the time.

Anyway, I stupidly rounded the internal wrenching plug that blocks the middle return hole on my HKS fuel rail, I just wanted to know if anyone knows what size and thread that plug is so I can replace it? Is it an NPT plug or?

Cheers for any help,

Martin.

Link to comment
https://www.sau.com.au/forums/topic/405342-hks-fuel-rail-fitting/
Share on other sites
34GeeTeeTee Grand Master

34GeeTeeTee

Posted
Posted

Can you just take the plug to pirtek or something?

Its just a blanking plug to block the middle port on the fuel rail right or have I misunderstood?

Yeah its the blanking plug he is referring too.... Have you pulled it out yet Martin? Or trying to get a replacement before you do?

Hanaldo Grand Master

Hanaldo

Posted
  • Author
Posted

Can you just take the plug to pirtek or something?

Its just a blanking plug to block the middle port on the fuel rail right or have I misunderstood?

That's the one.

If no one knows exactly what the fitting is then I will attempt to get it out and take it in. It's just that the liquid transfer solutions stores aren't really near me, it's a good 100km round trip to get to any of them. I will be going to Enzed tomorrow to pick up some braided hose and fittings, so thought if someone can tell me what it is then it saves me a trip.

Yeah its the blanking plug he is referring too.... Have you pulled it out yet Martin? Or trying to get a replacement before you do?

I haven't got it out yet because I still haven't found a 6.5mm allen key. It's also impossible to get a full size allen key on it properly with the Plazmaman plenum on. The head is coming off this weekend, so will get it out when everything else is off.

34GeeTeeTee Grand Master

34GeeTeeTee

Posted
Posted

Sweet, let me know how you go with the head removal etc..... IF there is a place on the east coast that has parts etc i am always happy to grab it and post it etc if it helps mate :thumbsup:

Hanaldo Grand Master

Hanaldo

Posted
  • Author
Posted

It leaks. When I originally put it in, I only put it in finger tight and without any thread sealant on it (doesn't have an o-ring) as I was just using it to block the hole while everything was apart, had been planning on taking it out again later. Then of course in my excitement when everything was back together, I forgot about it.

For some reason, it was then impossibly tight and I rounded it thinking it must be about to crack loose. It seems to have stopped leaking, but I can't exactly see it while I'm driving and the fuel pressure goes up. I have this thing about fire in my engine bay, so I'd rather get it out, replace it, and put it back in properly.

Hanaldo Grand Master

Hanaldo

Posted
  • Author
Posted

better off welding it up then, a fire extinguisher onboard is a good idea. :yes:

Have one :) The plan is to go dual entry in the future so I don't want to weld it. Wouldn't really want to weld it anyway, means getting it anodized again. Not too big a deal but I'm aiming for as quick a turn-around as possible this time, really want the car back on the road.

  • Like 1
34GeeTeeTee Grand Master

34GeeTeeTee

Posted
Posted

The actual plug sits recessed into the rail so i am not sure if the o ring would seal it due to the shape of those plugs, however that is on the right track :yes:

Hanaldo Grand Master

Hanaldo

Posted
  • Author
Posted (edited)

Yes, it's similar to that, but internal design, like this:

140.jpg

However I'm not sure on the size or thread. -10 would be way too big, that wouldn't even fit on the rail lol. I suspect it might be -6 as the end fittings were both -6, but then someone told me it isn't an AN or NPT fitting :/

Edited by Hanaldo
34GeeTeeTee Grand Master

34GeeTeeTee

Posted
Posted

Have you searched for someone selling a rail on the forums? See if they can get pics and measurements to help you out? They are loose in the pack when new so it wouldnt be a big hassle for them really?

Hanaldo Grand Master

Hanaldo

Posted
  • Author
Posted

Have you searched for someone selling a rail on the forums? See if they can get pics and measurements to help you out? They are loose in the pack when new so it wouldnt be a big hassle for them really?

Yehhh I could do, I was just hoping someone had needed to replace one before and remembered exactly what they bought, that way I could be sure it would be correct. Really the best way would just be to pull it out and take it with me, it's just so far to drive :(

kitto Mentor

kitto

Posted
Posted

Can you upload a photo of it?

It wont be an AN thread, it'll be either NPT or O ring port.

Most after market fuel rails have O ring ports threaded into them, then you just simply thread in an O ring port to AN size of your choice adapter.

Hanaldo Grand Master

Hanaldo

Posted
  • Author
Posted

Can you upload a photo of it?

It wont be an AN thread, it'll be either NPT or O ring port.

Most after market fuel rails have O ring ports threaded into them, then you just simply thread in an O ring port to AN size of your choice adapter.

I can take a photo of it in the rail? Lol. Looking through the Earls and Speedflow catalogs, there is NPT, AN and Metric threads for these plugs. Just going by the pictures, it looks like it's an NPT plug, it doesn't have an o-ring and the metric plugs aren't internal. So I guess as long as HKS are following what seems to be international standard, then it should be an NPT plug...

what about getting a mobile hydraulics guy to come out?

what about autobarn, would they have any of those rails on the shelf?

Well mine is a genuine HKS, I doubt they have any stock of those. In any case, I believe Autobarn no longer exist in WA, we only have Auto1 here :/ Mobile hydraulics guy is probably a bit too lazy for me haha, if no-one on here knows what the fitting is then I'll just wait until I can get it out and then make the trip again, no big deal.

kitto Mentor

kitto

Posted
Posted

http://www.hks-power.co.jp/usa/images/Pid=1163.html

Judging by the picture, i'm going to say its either a metric or NPT plug. I would say metric though. Probably M14x1.5

Really hard to see though.

Note, that is not an RB fuel rail. But HKS would have made them all very similar.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • latino_R35
      Questions on potential new purchase

      By latino_R35 · Posted

      Hey all, not sure how active SAU is anymore but will ask away anyways. Just wanted to get some experience on the 2008 model GTR CBA model.  I've hit that age in my life (43) where I'm like fk it time to get my dream (midlife crisis) car. Looking at importing one in and seeing if these can be reliable if the main flaws are fixed up. Plan is to keep money aside to do the following straight off the bat to future proof it: * install a stage 1 rebuilt trans with all new bits and pieces.  * install a new Bellhousing from the later model GTRs. Or potentially an upgraded stronger version like MAD or ATR. Besides the above two things and typical maintenance items anything else you'd recommend doing.   Been speaking to a few people and the engine on these are very reliable apparently. But keen on the view of the community here. Hoping to find a nice grade 4.5 with low mileage in Grey. I'd go black but swirls too easy. Look forward to your responses and feedback. Cheers    
    • latino_R35
      Returning Member

      By latino_R35 · Posted

      Do Alan and Keith work on Skylines now? I remember buying stuff from them when I owned my Ralliart Lancer a few moons ago. Definitely genuine guys and be excellent if they dealt with the skyline platform as well.
    • latino_R35
      Returning Member

      By latino_R35 · Posted

      Hey all, I'm Gaston from Sydney's West.  I was a member on here when I was a younger lad and owned a mint R33 GTS-T. Ended up selling it and getting married having kids (yadda yadda) we all know how the story goes. Now I'm back with the intention to get my midlife crisis (dream) car ... a R35 GTR.  You'll see me about asking questions and searching the forums. Good to be back and can't wait to get back an Import again.
    • Rezz
      2025 Osaka Auto Messe

      By Rezz · Posted

      I have to put something here in order to post the photos. From what I could gather there's more enthusiasm for modified cars now than there has been for years. There were probably more younger people there than older (me included lol) which was a good sign.  It did seem like the record least amount of representation of the 90's era hero cars on display though. Like maybe one or two examples of S-chassis Nissans, and maybe 3 or 4 R-chassis. By comparison there were a lot of Civics from that era but in all there were about 10 - 12 EG/EK Civic Type R.  Euro exotics are always there in large numbers, led by Liberty Walk...... say what you will about kids using markers to scribble on a Ferrari F40, it did seem like a stunt to infuriate Ferrari enthusiasts, or Ferrari itself. I wonder if there's something more to it. Either way LBWK have done some heinous things to a Lamborghini Miura this time. They should stop now.
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Engines and drivelines are not war stoppers for me mate, busted arse bodies and un-obtainium parts and panels are though Both cheap Brumbies I looked at had trashed tubs and a fair bit of rust
×
×
  • Create New...