Jump to content
SAU Community

Recommended Posts

hi guys, im having issues with my cheap an nasty tyres haha. my car has a fair bit of low, and quite a bit of camber, and ive busted the internal sidewall on my front left. seeing as though the car is going into for more power, i figured its time to throw on a decent set of tyres.

my current ones are load rated @ 91Y which im guessing is to low for the stageas weight.

the tyres im looking at are 93W (extra load rated) made by bridgestone but under another name?? and just general road tyres, also have a nice heavy sidewall, will these be ok with the weight of the stag, im also raising the car back up because its a bit ridiculously low and the camber wear is crazy lol.

cheers.

Edited by OMY31T
Link to comment
https://www.sau.com.au/forums/topic/405362-c34-s2-tyre-load-rating/
Share on other sites

93w will be fine. My car came from japan with bfg tyres that were rated 93y, now have federals rated 93W .

The numbers are the load rating and the letter is speed rating, w being 270kph & 93 being 650kg per tyre

my car has a fair bit of low, and quite a bit of camber, and ive busted the internal sidewall on my front left. seeing as though the car is going into for more power, i figured its time to throw on a decent set of tyres.

i figure you should probably invest in a camber kit and a wheel alignment first - wind it right out then raise the car untill the camber is realistic

yeah i though 93w would be ok, the other i think are rated at only 420kg which is probably a bit under. the camber is not to bad really, ive had much more camber on other cars without an issue, but the stagea is obviously quite alot heavier. what camber arms fit into the c34??\

cheers.

How much camber do you have? You might get there with just the eccentric bushes. I have R33 Cusco camber arms at the front and some no -name ones (R33) at the rear. Cheap and nasty tyres are never a good idea on any car at any time.

yeah i would buy cusco if anything, theres a set up for grabs atm on ebay for $300... i might try to get a shot of the camber... i dont thinl its alot, i had alot more on my HR31 Passage GT and never had an issue... apart from going through tyres like a bitch haha.

my local bridgestone tyre center has a set of Federal 595's in a 245/40/19 that were a trade in... 85% tread even wear for $100 a tyre... worth it?.. the only downside is 40 profile in a 245 puts me 6.52% larger in diameter. im not worried about the speedo so much, its more the effect on braking.

Edited by OMY31T

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Meh, At 60 years old, I have been doing dumb stuff for much longer than you mate, I am the true King And unfortunately I cannot be a maroon, as I am not brownish red As for not getting ITB's, the plenum intake will apparently show typical gains across the board and increase induction noise a bit, but, have all over less dort than ITB's Cost difference for the extra ITB dorts was significant though, the total parts for the plenum set up is "around" $2kAUD plus shipping, the ITB's were $4kAUD plus shipping, I was contemplating really hard about paying the extra $2k for all of the dorts, but weirdly, some form of common sense, from listening to the platform experts prevailed  As for the NA mod hate by some, I've had a few boosted cars, with all their inherent issues, I'm now looking at simplicity and legalities for a street car, maybe I'm just getting old, and I'm quite happy to spend some of the kids inheritance, 5kw at a time 🤣 And think of all the money I'll be saving on consumables that something with boost needs, like engines, gearboxes, diffs, clutches,  tilt trays... etc. etc. etc. 🤪
    • Haha.  I wouldn't say I am either but I've definitely been around it plenty.  I'm guessing you know the dial in is basically to make a handicap to level the playing field between racers.  The car with the slower dial in goes first and in theory if they run their dial in time and the faster car also does then they cross the finish time if they also have exactly the same reaction time - if you go faster than the dial in them you lose, but if you are too slow there's a good chance the other person will get to the finish line first. I'm normally supporting other cars but they were all pretty dialled and were egging me on to race as well, here's one of the cars I tune (Starlet) which ran within like 1 hundredth of its dial in through the competition: https://www.youtube.com/watch?v=inEBu-d9Gn4&t=69s
    • Where ever the fuel reg gets it reference is what I use to T into for map reference been a very long time so where it goes to plenum/runners I have no idea but never had issues. 
    • What ecu? Same shop every time? Same ambient temperature? If timing is correct then pull plugs and see if lean or rich. Dyno can also read different if they have changed ramp rate or not set tacho/speed properly  
    • I've never done dial in's just straight up, whatever that's called. I'm far from a drag (racing ) expert.
×
×
  • Create New...