Jump to content
SAU Community

Microtech Rb25 Ecu With Hand Controller Lt12 2009 Model

BMYHOE
 Share

Recommended Posts

BMYHOE Proficient

BMYHOE

Posted
  • Author
Posted

Hi Guys,

The computer has a loom (not plug and play) suits Rb25 & Rb26 my tuner told me. Also comes with hand controller & 3 bar map sensor.

(map sensor is internal of ECU had to be sent to microtech to be insatalled/programmed have receipt $330 done in Feb 2012)

Link to comment
Share on other sites
go_away_p_plates Contributor

go_away_p_plates

Posted
Posted

mate very interested ive got an rb25/30 thats just about finished and ive been after an ecu, I was going to go HACLTECH s2 can you just tell me how much kw you got out of the microtech im not too familiar with them? is the lt12 capable of running big kw setups?

Thanks, Bill

Link to comment
Share on other sites
go_away_p_plates Contributor

go_away_p_plates

Posted
Posted (edited)

Mate we had a chat the other day and you said you would get back to me about the loom etc i was ready to come past and take it off your hands but you never got back to me... also rang you the next day and left you my name and number to remind/ ring me back and still never got back to me whats the go did you wanna sell it or not

Edited by go_away_p_plates
Link to comment
Share on other sites
BMYHOE Proficient

BMYHOE

Posted
  • Author
Posted

Mate we had a chat the other day and you said you would get back to me about the loom etc i was ready to come past and take it off your hands but you never got back to me... also rang you the next day and left you my name and number to remind/ ring me back and still never got back to me whats the go did you wanna sell it or not

Hi Mate,

im sorry about the muck around i have just been so busy moving home and running around its not funny..

The computer does not come with any loom as it was damaged.

A new loom can be purchased from Microtech for approx $120.

I was making 390rwkw with this ECU on 24PSI

Open to offers need this gone.

Link to comment
Share on other sites
  • 2 weeks later...
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Butters
      Garrett G-XRace Range

      By Butters · Posted

      Big claims here.  Any links up on the website ?   
    • Butters
      RB gearbox options

      By Butters · Posted

      If your HP goal is reasonable and you are not drifting. Buy a new R34 box.  If the above is not true, buy a wrecked R33 box and put a gearset in it.  CD09 are not as strong as you think and the cost of / mess around of the conversion puts you in gearset territory.    Also the deal above is awesome,, get that  
    • dbm7
      Got this r31 silhouette flood car to rebuild.

      By dbm7 · Posted

      Just got back from a little hands-on with a G58 Baron....I was thinking about this... ..best I can figure it, that pinny was tail-ended ...I didn't really think about the wiring, because all that mattered was the tank and pump cradle (I think I mentioned the pump itself I couldn't vouch for)...which didn't matter, as you said you'd be replacing the pump anyway.... ...'for some reason'....and I imagine this is the panel shop's doing... they've replaced the cradle wiring with a metre of 7-core trailer loom, and attached the loom plug (from a different car) to that. The actual cable run from the top of the pump cradle, to fuel pump harness end in boot, is maybe 60cm in length...so I've no idea why they did this... ....the connector in the boot of the pinny, is not going to help you here...because in theory, it should still be present on your car. On top of that, because they've done what they did, we have no idea which colours of the trailer cabling, have been connected to what on the fuel pump cradle (pump +/- , shield, fuel guage/low-level senders)... ...this means, best approach is to remove the pump cradle, and re-work it now ...not later. That is, if you were going to replace the pump, do it, replace the soft lines at the same time...and sort the wiring out (replace that trailer cable with the wiring loom off your old cradle)...
    • GTSBoy
      Fake ARP bolts?

      By GTSBoy · Posted

      Well, maybe not. The main feature of Chinese manufacture seems to be incredibly variable quality, coupled with an apparent willingness to find a way to see even the stuff that fails QC. So the military could still take the cream of the production run and somehow sell the "sellable but not really useable" stuff to the stupid round eyes on the other side of the world.
    • Dose Pipe Sutututu
      Nismo copper mix twin “pull” pedal height engagement

      By Dose Pipe Sutututu · Posted

      Have you adjusted the clutch pedal rod? You can wind it in to shorten it. Just can be a cnut to get to.
×
×
  • Create New...