Turbo Drain Feed Gasket ?

[pj-33]

Got a question on my gt35r my oil drain feed gasket was broken but I can't find a replacement anywhere what's the best thing to use cheers

[abr33]

Buy some gasket paper, and a craft knife and go crazy

[scotty nm35]

http://www.ebay.com.au/itm/Turbo-Oil-Drain-Gasket-Garrett-BB-GT25-GT28-GT30-GT35-/280922842352?pt=AU_Car_Parts_Accessories&hash=item41684e64f0#ht_1622wt_1392

[pj-33]

So u reckon gasket paper will hold up? Would I need to use any glue ?

[Hanaldo]

http://www.ebay.com....#ht_1622wt_1392

$15 in shipping!? Root that for a joke, unless I'm getting a box of 100 for that

So u reckon gasket paper will hold up? Would I need to use any glue ?

I used gasket paper on mine with just a very very thin layer of gasket goo. Was more just to hold the gasket paper in place while I bolted the drain back on.

[DVS JEZ]

Plain goo works also i get stuck. Make sure the flange is flat tho

[pj-33]

Ok sweet I have this high temp copper glue it's like a Red coulor, so bit of that cooper glue and gasket paper should be sweet yeh? Thanks heaps guys

[The Dan]

Be VERY careful about how much you put on. You literally only want a thin smear. Once the two flanges press against each other, the sealant will squeaze out and you don't want major quantities blocking the drain hole or being able to become dislodged and travelling down into the sump. There, they can block the pickup and smaller galleries.

[Hanaldo]

Be VERY careful about how much you put on. You literally only want a thin smear. Once the two flanges press against each other, the sealant will squeaze out and you don't want major quantities blocking the drain hole or being able to become dislodged and travelling down into the sump. There, they can block the pickup and smaller galleries.

This.

As I said, I really only used it to keep the gasket paper in place. The paper does the job fine on its own.