Getting Speedo To Work After Manual Conversion R33

[55psi]

Hey guys,

I have done a manual conversion into an auto r33 chassis. This consisted of using manual engine loom and everything from the manual car. I have swapped the cluster with a manual one as well.

The issue is that the speedo is not working. I have searched through the forums, but they have only provided answers for when using the automatic engine loom as it is a straight plug and play into the manual speedo sensor on the gearbox.(Nothing was unplugged from the original manual driveline setup, manual loom was still connected to everything.)

Does anyone know why its not working? Is it because im using a manual cluster and is not registering it? Need to know answers!!

Cheers

Jason

[GTSBoy]

It should be easy. The wires from the speed sensor on box should go to cluster. You need to check continuity and then perhaps trace/follow the wiring to find out where you haven't connected it properly.