Jump to content
SAU Community

Recommended Posts

AIR Street drags today, took my R35 out for its first Drag meeting.

I never got a chance to take out my old 2009 R35 & it has been years since

running nines in the R33 so was great to get out there again & do some runs.

First run was a 10.7 @ 128, followed by a 10.9 @ 133, and 10.7 @ 134.

Next run was a shocker, it went into limp mode & ran a 19!

Then finished off with another 10.7 @ 130. Was great fun & now I need to put

a cage in it if I want to come back.

Might have to consider a comeback with the R33. Be interesting to see how it would

go with the Michelin slicks compared to the drag radials I used to run back in the day.

Nice one John, very consistent (except the last one :))

What happened to Kier Wilson half way through his run?

Let me know if you want some video, I think I got your last 3 runs.

Dang that's fast. You'd run neck and neck with me....on my bike! In fact you'd probably beat me more often that I'd beat you. Ultimately my R1 is faster but it takes a far more precise run to go that quick.

And ANDRA are homos.

Seriously, they need to revisit their cage rules for street cars.

Yes I would like to see some video of it.

I think 9.99 sec would be a more realistic cut off for roll cage, chutes, etc.

These days there are plenty of genuine street cars that can run into the tens.

It would be tempting to push down to the 10 flat for lots of quick car owners but

the 10.99 cut off seems to discourage that.

As far as chutes go, I was keeping it flat WAY past the traps - up to 235kmhr on one

run! Still had plenty of time to slow down & could have easily taken the corner without

washing off all the speed. I know it has to be one rule for all but old rules are starting

to get a bit conservative.

I had a great time anyway. Might just get a current ANDRA inspection done on my R33

as that has all the gear.

Nice work mate, could you elaborate on the following things for my own personal knowledge.

1. What year model is your GT-R and what modifications

2. What tyres where you running and tyre pressures

3. Did you use launch control and at what rpm was launch

4. Was it on R R off or R R R

This would help me heaps, I have an 09 with full Exhaust and cobb and would like to get in the 10s this will help me work out if its possible.

Cheers,

2011 with Willall mods - WR600 spec I believe.

New Micheins at 39psi - just drove it in there & went for it.

Yes launch in auto, RRR.

Full weight car, full weight driver! Full tank of juice.

1-2/10s better on 60' would give a 10.3 to 10.5 without too much trouble.

This is my daily so probably wont worry about doing it again - they probably stop me anyway.

Pretty happy with that, was fun to blow past the straight out exhaust V8s that were trailered there!

was good to see the runs munro. be interesting to see with lower PSI.

10.99 is a bit of a joke, plenty of cars there seemed to be running faster with no cage etc (they did seem to be v8's though) and with drum bakes on the rear. think ANDRA do need to re visit and make it 9.99 or something like that

good job

anyway

2011 with Willall mods - WR600 spec I believe

Hey mate nice run. You say willall wr600 spec for your mods. But on his site wr600 package suggests 600kw... Man if your producing over 800 hp shouldnt you should be cracking the 9's with those numbers? Are you running stock turbos?

No, its not as simple as that.

Go back a few years (ok 10 or so) & there were only a few of us that were pushing up over

450awkw with our GTRs. With 600hp at the wheels (getting up towards 800hp at the crank)

you needed to strip out your car & drive it like you stole it to push into the high nines.

After you spend tens of thousands of dollars breaking driveshafts, gearboxs, engines etc

you go crazy with more power & get into the mid nines, then in Keir's case even crazier &

into the 8s. Back then we were talking 1/4 million plus cars. 1000hp - 1300kg.

Now zoom forward to today. An R35 GTR weighs in around 1800kg with some fuel in it.

Even with 800hp, the launch control system will only give as much torque as it thinks the

treads can take - it might halve the power for that precious 1.5 seconds or so that you are

trying to move 1800kg (plus driver) over that first 60 foot.

Elapsed time on the 1/4 is ALL about the 60' time. GTRs are not designed for this.

Engine tuners just look at the mph to see what a car COULD do if it got the perfect world hookup.

My best mph on the day was 134mph. Good for a flat 10.

Back in the 90's I used to run a small block HJ ute in Super Sedan.

It ran 10.1 all day at 133mph.

With 600hp!

But it couldnt stop. Or corner.

GTRs are amazing street & circuit cars that just happen to be a bit handy down the 1/4.

No, its not as simple as that.

Go back a few years (ok 10 or so) & there were only a few of us that were pushing up over

450awkw with our GTRs. With 600hp at the wheels (getting up towards 800hp at the crank)

you needed to strip out your car & drive it like you stole it to push into the high nines.

After you spend tens of thousands of dollars breaking driveshafts, gearboxs, engines etc

you go crazy with more power & get into the mid nines, then in Keir's case even crazier &

into the 8s. Back then we were talking 1/4 million plus cars. 1000hp - 1300kg.

Now zoom forward to today. An R35 GTR weighs in around 1800kg with some fuel in it.

Even with 800hp, the launch control system will only give as much torque as it thinks the

treads can take - it might halve the power for that precious 1.5 seconds or so that you are

trying to move 1800kg (plus driver) over that first 60 foot.

Elapsed time on the 1/4 is ALL about the 60' time. GTRs are not designed for this.

Engine tuners just look at the mph to see what a car COULD do if it got the perfect world hookup.

My best mph on the day was 134mph. Good for a flat 10.

Back in the 90's I used to run a small block HJ ute in Super Sedan.

It ran 10.1 all day at 133mph.

With 600hp!

But it couldnt stop. Or corner.

GTRs are amazing street & circuit cars that just happen to be a bit handy down the 1/4.

well said:) and their is an extra 40KG ballast in the driver seat now J/K

my 32 with 400 managed mid 10's and to get any better would cost an absolute fortune.

your 33 was a weapon to get in to the 9's and look at all the comfort and style of your 'daily 35' to be just that 1sec slower:) i know which id rather.

now run the ML:)

haha. ML. now that would be funny. They are supposed to run 12.9 sec!

Martin reckons he got another 100hp out of Keir's CLS with the twin turbo 5.5L

so maybe I should let him hook up the cables to the ML & see what the fourby can do!

I think the XR6 should be next in line for a day at the drags - has been a LONG time between drinks..............

Maybe next time I take the R33 out I should ask them if I can take the tow car for 1 run - just for fun!

No, its not as simple as that.

Go back a few years (ok 10 or so) & there were only a few of us that were pushing up over

450awkw with our GTRs. With 600hp at the wheels (getting up towards 800hp at the crank)

you needed to strip out your car & drive it like you stole it to push into the high nines.

After you spend tens of thousands of dollars breaking driveshafts, gearboxs, engines etc

you go crazy with more power & get into the mid nines, then in Keir's case even crazier &

into the 8s. Back then we were talking 1/4 million plus cars. 1000hp - 1300kg.

Now zoom forward to today. An R35 GTR weighs in around 1800kg with some fuel in it.

Even with 800hp, the launch control system will only give as much torque as it thinks the

treads can take - it might halve the power for that precious 1.5 seconds or so that you are

trying to move 1800kg (plus driver) over that first 60 foot.

Elapsed time on the 1/4 is ALL about the 60' time. GTRs are not designed for this.

Engine tuners just look at the mph to see what a car COULD do if it got the perfect world hookup.

My best mph on the day was 134mph. Good for a flat 10.

Back in the 90's I used to run a small block HJ ute in Super Sedan.

It ran 10.1 all day at 133mph.

With 600hp!

But it couldnt stop. Or corner.

GTRs are amazing street & circuit cars that just happen to be a bit handy down the 1/4.

Was that ute yellow?

It's funny the difference between the Na v8s and the turbo cars

A good mate of mine runs mid-high 10s in a full weight xa Tudor with 425rwhp but given a manual box it would have a whole heap more, so don't discount the r35 off the line as pound for pound your car sounds like it gets off the line well

What I do love seeing is that xa on 15x9s and drag radials beating the guys with 15x14s tubs and huge slicks, ladder bar rear ends etc but they are a second slower then an angry streeter

haha. ML. now that would be funny. They are supposed to run 12.9 sec!

Martin reckons he got another 100hp out of Keir's CLS with the twin turbo 5.5L

so maybe I should let him hook up the cables to the ML & see what the fourby can do!

I think the XR6 should be next in line for a day at the drags - has been a LONG time between drinks..............

Maybe next time I take the R33 out I should ask them if I can take the tow car for 1 run - just for fun!

ill run the ute for you:)

someone said you maybe willing to sell the ute? i sent you a PM too:)

Ps you should run the 33 more, I saw it ah heathcote (or was it spring nats?) years and years ago

Edit - would've had to be heathcote, because from memory you broke a front shaft or something and I was pissed because I was stuck with shit tyres and running low 14s at 105 in my blue r33

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • H2 (for cars) will never happen. It's not reasonable for any number of reasons. It's also not reasonable for almost all of the industrial uses that the fanbois say that it will be used for, again for a large number of reasons. There are some cases where it will be good. But, even those will be massively hampered by the economics. The only way that H2 can be economic is if we somehow manage to get from where we are to the other side of the economic-valley-of-death in which no-one can operate. You need there to be sufficient renewable generated electricity to be available so that it is effectively free. Once you are there, you can do whatever the hell you want and hang the efficiency. But until you get there, the ever diminishing value of electricity makes it harder and harder to encourage businesses to build the new generation capacity, and they will simply stop investing in generation projects. (I kinda think there needs to be just government money spent on building the required capacity in a non-commercial way, similar to how the first fossil fueled grids were built, as national-government owned utilities. And probably some nuclear in there to start. But this all should have started 10-15 years ago to avoid the chasm of death that we face right now). Synth fuels will be much more likely, but will only occur is there is at least some renewable H2 production, because you need H2 to do it. And you need stacks of free (or at least extraordinarily cheap) energy because assembling molecules back into fuels is exactly the opposite process to burning the fuel, and the reason we burn fuels is because there is so much energy squeezed into each molecule. So you're somewhat subject to the same economic valley of death problem as above anyway. That is unless people are willing to pay the current equivalent of $5 or $6 per litre of petrol-ish liquid fuels. Can you imagine it? The squealing at $2 now is bad enough.
    • This is so cool. Get a dashcam that records audio and hopefully you'll catch it.  Maybe there's a brand or some kind of markings on the back ? Are the pics hand drawn? I love it so much.
    • Hahaha yep, point(s) taken. I just like seeing different things and an EV in an R32 is pretty different. I'm not on the EV band wagon, I'm waiting for synthetic fuels or hydrogen personally. 
    • I mean it's probably likely that people overestimate their skills in dialling in a setup and noticing the changes. I had SK shocks and springs, and added heavier springs and got them revalved by Sydney Shocks to suit based upon what I told them I wanted the car to handle like. I got back a completely different feeling set of shocks, which probably (?) feel great on track but holy hell are they rough on tram tracks and the like. The shock dyno actually looks pretty similar to Shockworks (from what I can surmise from a screenshot of a youtube video - and my dyno printout...) Truth be told I doubt I'd be any faster or slower with either setup, or camber/castor combination. I also had whiteline eccentric castor bushes up front of my R34. I removed them and put in poly non-adjustable ones to soothe my OCD (nobody ever set the castor the same side to side, and it'd be near impossible to do) and be happy the wheel is centered in the well now for clearance reasons. Yes I wanted it to move 1mm 'back' :p I've effectively set my castor back to stock, negating all the benefits of that which is supposedly massive. I've probably also altered toe and camber in a negative (detrimental) way. I can't tell any difference steering the car.
×
×
  • Create New...