Jump to content
SAU Community

Recommended Posts

Hi Guys,

For the last few days the car was running very rough with the exhaust gas light flickering, the car was almost misfiring. Now it wont start up at all. I am not sure how to put the car into diagnostic mode, if anyone would be so kind and advise how to do this?

Secondly, I cannot see the red led light up in the ecu, could the ecu be dead?

Many thanks.

Edited by YunisA
Link to comment
https://www.sau.com.au/forums/topic/405966-r32-gtr-not-starting-up/
Share on other sites

Google how to put into diagnostic mode. Or get a mate with a consult plug.

Theres a very good chance ur spark plugs are really fouled which will cause no start.

Check and replace the spark plugs then u can diagnose. It may just be a popped intercooler pipe, bad afm etc

Check your basic's, air/fuel/spark. Be good to check your plugs first as stated above. Make sure they arent fouled. If they are looking pretty good, id start looking into the fuel side of things. Maybe check fuel pressure and your cam sensor.

Hope that helps!

Plugs are fine- is there fuel on them after cranking or are they dry? Could be no fuel ie possible fuel pump failure etc.

Check there is sufficient flow and oressure in the fuel line. Make sure filter isnt blocked.

Check ALL fuses while ur at it

With ignition on does your engine light illuminate?, If not then sounds like your ECU has no power.

If all good remove CAS and spin it with your hands, re-check spark and put your hand over the injectors and see if you can feel them pulsing(clicking).

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So you're now accepting offers of 10% more than the cost of the turbo kit fitted?
    • No......not yet Minister for War and Finances has stated that the Commodore has to go first Not that I am going to modify the NC any more than what it is already modified now.....
    • Thanks again, really helpful chap from alpha omega wanted to speak to me, little concerned if this is meant to he aero alloy/ airospace quality and car sitting on drive has caused this.  Airplane are subject to much more changing temp and conditions than road salts! My caliper, many other components much older have surface rust but never eating part of the metal   Had I not seen it , could have been a disaster! specifically on rear part of bracket coming off like biscuit will update on what they say, helpful people so far
    • January or Feb is it booked in for turbo fitment?
    • The MX5 has had some annoying rattles in both front doors over bumps So I installed fancy pants door bushings, which stopped all of the rattles with the windows up, but........with the windows down there was still rattles, so after some googling,  and a chat with MX5 Mania, I got some new door to glass weather seals, all the rattles, windows up, or down, are gone now Shout out to MX5 Mania, the weather seals were on sale, and when I head to Dural to pick the up they even fitted them for me for free I did see a "really" nice Blue NA sitting out front   and this Black NC PRHT that looked like it has sat in the sun for its whole life and never had a wash, the clear coat was non-existent, an it looked horrible, really horrible, but, it had a nice turbo kit with over 200kw, the thing went like a cut snake, bagging the rears through the gears and dosing like a champ 😍 But, as I've always stated, I am keeping my NC na, I'm happy with the current power the car makes In other news: MX5 Mania do a drive in drive out turbo kit, the only minor additional part recommended for boosting my car, as it sits now, is a oil cooler, and that bonnet vents are definitely required for track use Aftermarket version look a bit to "racecar" spec I wonder how Focus RS bonnet vents would look?????
×
×
  • Create New...