Jump to content
SAU Community

Recommended Posts

Same as Sean, sometimes peaks at over 2000rpm on cold mornings, but only for a second, then quickly drops back to about 1500rpm, then drops slowly until the engine is warm, then sits on 600.

Link to comment
https://www.sau.com.au/forums/topic/405987-revs-at-startup/#findComment-6467569
Share on other sites

One thing i have noticed though when i park my car over night outside and i drive in the morning, the engine sounds a lot better cold than warm (normal) but it feels a little bit gutless until it's warm but that just may be because i have it overnight 12 hours or so in 10ish degree cold.

Link to comment
https://www.sau.com.au/forums/topic/405987-revs-at-startup/#findComment-6467632
Share on other sites

you might need an oil change? how long until your next?

or one of your O2 sensors might be faulty/dirty.

or it's really cold

Flushed and changed my oil last weekend, o2 sensors are fine checked those a few weeks ago too.

He's in Mackay... It doesn't get cold.

Not true man! 2 weeks ago it hit 4 degrees here at night/morning

Link to comment
https://www.sau.com.au/forums/topic/405987-revs-at-startup/#findComment-6467930
Share on other sites

not sure why it does it.. the VQ35 in other cars doesn't rev that high.. but it does seem normal for the V35.

My Stagea revs to about 2400 for a second from first start in the morning and then drops as it warms up. Always has.

Damn thing won't drop below 750 when warm...

Link to comment
https://www.sau.com.au/forums/topic/405987-revs-at-startup/#findComment-6468121
Share on other sites

have you done the idle air volume learn procedure?

After cleaning my throttle body, it wouldn't idle much below 900 until I ran this process.

I guess the VQ35 in the Stagea is probably setup the same. The VQ35 in the Murano and Maxima don't rev anywhere near as high at cold startup.. not sure why our cars need to?? I know they are tuned differently, but I am not sure why that would make a difference.

Link to comment
https://www.sau.com.au/forums/topic/405987-revs-at-startup/#findComment-6468173
Share on other sites

i remember my startup revs situation started happening after installing the 350z intake tube. did both the throttle learn and idle air volume procedures multiple times with no improvement. there are absolutely no leaks anywhere.

its something i want to fix before installing the plenum spacer.

Link to comment
https://www.sau.com.au/forums/topic/405987-revs-at-startup/#findComment-6468331
Share on other sites

have you done the idle air volume learn procedure?

After cleaning my throttle body, it wouldn't idle much below 900 until I ran this process.

I guess the VQ35 in the Stagea is probably setup the same. The VQ35 in the Murano and Maxima don't rev anywhere near as high at cold startup.. not sure why our cars need to?? I know they are tuned differently, but I am not sure why that would make a difference.

I did indeed. Prior to the relearn, it liked idling at 950rpm when warm.

Far cry from my old VQ25det Stagea that idled at 550 when warm.

Link to comment
https://www.sau.com.au/forums/topic/405987-revs-at-startup/#findComment-6468430
Share on other sites

Damn thing won't drop below 750 when warm...

I have a cable (+ laptop) & can set the idle to whatever I like (within reason). I should send it down to you one day; if no one in Melbourne has one you can borrow.

Edited by Commsman
Link to comment
https://www.sau.com.au/forums/topic/405987-revs-at-startup/#findComment-6468491
Share on other sites

I'm far from an expert on any of this but is it possible that the vq35 in our cars reacts differently than other models due to being released for the Japanese market? It gets extremely cold there so maybe it is required for that climate??

Link to comment
https://www.sau.com.au/forums/topic/405987-revs-at-startup/#findComment-6468540
Share on other sites

Usually, and don't quote me on this :D they will rev higher on startup to heat up cat coverters quicker for emissions reasons.

A mate's 350ZHR did the same thing.

I would say this probably isn't the reason, the revs only peak to 2000rpm for a second then drop back to about 1500rpm, which is where most cars idle when cold. If the intention was to heat the cats and O2 sensors, it would need to stay at high rpm for much longer.

Link to comment
https://www.sau.com.au/forums/topic/405987-revs-at-startup/#findComment-6468684
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi ๐Ÿ™‹โ€โ™‚๏ธ. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? ๐Ÿ˜ƒ  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this ๐Ÿ™
    • Hi, Marek here ๐Ÿ™‹โ€โ™‚๏ธ. I finally fulfilled my longtime dream - recently bought Stagea and now waiting for it to arrive in Poland. There's only few of these in my country, and one of the owners  recommended mi this forum as a source of all the info i'd need since now i own one  so here i am.  
    • Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
    • and it ends up being already priced in as though you're just on 91RON without any ethanol. Car will lose a bit of economy as the short and long term fuel trims bring down the AFR back to stoich or whatever it is for cruise/idle for the engine.  
ร—
ร—
  • Create New...