Jump to content
SAU Community

Recommended Posts

  • 1 month later...

Yeah I get this as well, it's annoying when you're in a hurry and when changing gears on the auto (especially to reverse) at high rpms makes the car jerk...

It's not just annoying, it's damaging to your transmission. If it's a cold start, let the engine warm up a little so that the revs drop to around 1000rpm or less. I never engage any gears unless it's completely warmed up - so, well below 1000rpm.

It's not just annoying, it's damaging to your transmission. If it's a cold start, let the engine warm up a little so that the revs drop to around 1000rpm or less. I never engage any gears unless it's completely warmed up - so, well below 1000rpm.

Yeah my engine stays down on cold for about 3-5 mins when it's been sitting outside all night i have a manual so i always drive like a grandma until my engines warm shifting before i need to and minimal acceleration.

It's not as big a deal for a manual since you can ease out the clutch (at the expense of possibly burning it out if the revs are too high). Still, it's much cheaper to replace a clutch than it is to rebuild an auto. It's the autos where we need to worry. Engaging an auto at that rev range is pretty much neutral-bashing it which is never a good thing.

Edited by The Max

It certainly isn't ideal, but I don't think it is all that brutal to the auto, after all, V35 autos aren't failing prematurely.

The engine is reving but it drops fairly quick when you engage drive. So it isn't like holding half throttle and dropping it into drive and chirping the tyres.

I would wait if you have time, but not be too worried about it if you don't. It is probably worse for the engine and transmission mounts.

Yeah I always warm up my car so that at least the temperature is 3 bars above bottom cold and below 700 rpm. Still get a slight click sound and as suspect it's probably the axis click as its a common problem with our cars as mentioned on g35driver.

Yeah I always warm up my car so that at least the temperature is 3 bars above bottom cold and below 700 rpm. Still get a slight click sound and as suspect it's probably the axis click as its a common problem with our cars as mentioned on g35driver.

Yep i get the clicking from the back on acceleration. Also get a little bit of a clunk as i brake, but i do need my rotors machined pretty bad.

On a cold start 1st thing in the morning mine will fire up to 2000 rpm and then drop straight down to 1500 rpm, in gear it will be idling around 1000rpm, the click you guys are taking about is a common thing with V35s just do a search on it

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...