Jump to content
SAU Community

Recommended Posts

Up for sale is: NO SWAPS sorry

*Blue Japanese Spec spec R Nissan Silvia S15

*approx 84xxx kms

*Manual

includes:

*Greddy Electronic boost controller(Running off a T piece at the moment)

*Brand new HID's

*Varex Muffler

*Di Jetro Power FC(worth 2k)

*Hicas and a Hicas lock bar

*18inch Wheels

*Dmax Tail lights, will come with another pair of tail lights

*Bigger turbo(unsure)

*Heavy Duty exedy clutch

*Hybrid intercooler

*Pioneer speakers and pioneer sub

*Genuine S15 Floor mats

*Stock Airbox as well as a Pod Filter

Selling on behalf or a friend who is in finacial strain, the cars gearbox is on the way out but drivable (6 speed) you can try some redline? and the front right wheel bearing need replacing

he maybe slightly neg

but he needs it gone asap 8.5 is very cheap

localted melbourne (bought car was bought from nsw hence the nsw plates on these pics)

can get more pics interior condiont is very good. inbox if your really intersted CAR MUST GO ASAP

post-64379-0-09351100-1343708664_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/405989-jdm-s15-85k/
Share on other sites

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • I’m thinking that’s the route I’ll  go, thanks for the input!
    • Hey all, my 2004 Nissan Skyline 350GT overheated the other day with coolant boiling and leaking out of the coolant reservoir when I was parking. So today, I started it up again just to see if it was a thermostat/head gasket issue. After about 20 mins of running, temps were normal again, no coolant was leaking out and the upper reservoir hose was warm but my engine suddenly cut off. I checked the oil dipstick and cap when it was running and there was no white foamy residue and the exhaust did not have white smoke. I tried starting up the car again but it would only crank, similar to when I had a camshaft sensor issue just that now there’s no check engine light on the dash. Any ideas? Unfortunately I don’t have an OBD2 that can read the Nissan's programme.
    • Bump on this to not make another post, had a ‘head drain’ leak on me and have the engine out as we speak. Planning on just putting a new freeze plug back in , plug the tapped holes and just be done with that headache.    Now I still want to relieve pressure to allow oil to pass down the blocks returns easier. I’ve seen catch cans with multiple vents help folks with this issue on this forum.  I’m wanting to make my own. I have some pictures here of my setup if anyone can help how I should plumb and design the catch can I would deeply appreciate it !   rb25 Oil upgrades: 1.0mm restrictor n1 pump/billet gears extended crank collar  extended sump with trap doors/w welded fitting    
    • The Frenchy's kit is the way to go forward. A modern compressor that weighs about 1/2 as much, is at least twice as efficient, and will do a good job on R134a. And of course the kit has everything else you need to connect it up and have it work properly.
    • Hey all , I am in the process of having the AC system in my r32 GTST converted from r12 to r134a and I’m being told my compressor has gone bad and I will need a new one. I was wondering if anybody has any suggestions for what is the best route to go aside from dropping $1500 on a new oem one? I did see that Frenchy’s performance garage offers a kit to mount a Toyota compressor, has anybody actually used this kit on their car? Or is there anywhere I could purchase just a clutch? Any help is appreciated.
×
×
  • Create New...