Jump to content
SAU Community

Recommended Posts

Hi guys,

First off let me say, i really dont know much about engines, parts, etc. I just love skylines, so forgive my lack of education from here on in...

I have had a problem going on for months now that still is not fixed, and am hoping someone could offer some suggestions.

Basically it is running badly, but not all the time. Sometimes its far worse than other times. And then other times it seems completely fine.

When i squeeze the accelerator gently (like you would for normal everyday driving), it feels jerky, not at all smooth like it always used to be. And at its worse even feels like the car is pulling back. If i accelerate harder it doesnt really seem to be a problem. I notice the problem most when im driving up hill around 55-60km/h in 3rd gear.

Also when I pull up at lights for a while, sometimes it starts idling really badly, goes down and up progressively worse, and if i dont give it a little gas, it will stall. I *think* this seems to be worse if i have the air con on, but im not sure if this is co-incidence or not.

It starts up without a problem, but i notice, if i try to move off too soon, sometimes it pulls back (sorta feels like a fuel problem). Not too worried about this, as if i start it up and wait a few seconds before moving off its fine. I just mention as its another symptom that didn't used to happen, and i suspect is related.

I have had the fuel pump replaced maybe 2 years ago now. And recently had the fuel regulator (im pretty sure thats what it was) replaced when i had it serviced, as the mechanic suspected it was the problem. Although the car improved a lot, and it wasnt nearly as bad as it was, the problem still happens. Could have been to do with the rest of their servicing. Spark plugs have been replaced regularly, as with any other normal maintenance that goes with services.

I found another thread where someone was complaining of similar issues, and some other suggested it was the Air Flow meter. Is that a possibility for my symptoms?

Any help & advice i can pass on to the mechanic would be GREATLY appreciated.

Or any places around melbourne (pref eastern suburbs) that people can suggest who deal with imports / skylines who might have a better idea would also appreciated.

Thanks

What mods do you have?

It sounds like a few problems.

Clean your AAC valve

Clean your AFM

Replace your air filter

Check your plugs

Replace fuel filter

Thats what I would do

+1

auto or manual?

right, only asked because i had a few engine stalling etc problems when me auto gearbox oil was low.

mate im down in hastings at my old felas this weekend, working on mine. if you wanna pop down in it ill hook it up to a diagnostic, so we can check your tps aac timing 02 sensors and all that jazz. just bung me a few jimmys!

Geez thanks plattsy, that's mighty generous of you. I have the car booked in Friday for something else, so was going to get them to check out the above suggestions then. So I'll know by Friday night if it's still got problems or not. Saturday is a no go, but possibly Sunday if that suited you?

ill be working on the motor Saturday and Sunday, the consult check should only take about 15-30 mins, and dont get them to look at those problems mate, save your self some money. ill talk you through how to do it all its really simple! (no im not a Nissan mechanic but ive been inside more engines than there are mcdonalds in Australia so i should be able to help you out a fair bit!)

ill be working on the motor Saturday and Sunday, the consult check should only take about 15-30 mins, and dont get them to look at those problems mate, save your self some money. ill talk you through how to do it all its really simple! (no im not a Nissan mechanic but ive been inside more engines than there are mcdonalds in Australia so i should be able to help you out a fair bit!)

Thanks, appreciate that. They said that they have already cleaned the AAC valve previously thinking that was the cause of the idling problem too, but it doesnt appeared to have fixed it. He said they are a bit stumped over the cause of that.

The jerky acceleration problem, he seems to think it could be the coils causing the problem, but said they are pretty expensive to replace.

I'll see what they say when i pick it up tonight, but if no luck i might take you up on your offer Plattsy. Saturday might actually work for me after all.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I figured out what’s wrong. It’s something to do with the high beam wire short circuiting. When I measure the continuity with a multimeter on the headlight socket connector it gives me a continuous beeping noise when I put it on the ground socket and also on the high beam socket.  On the passenger side of the car (working side), it’s only beeping when the probe is on the ground socket. Which makes sense.  So that means it has something to do with the high beam power supply for the drivers side. How do I trace that? Is it the turn signal lever malfunctioning? The one that also controls the high beam and low beams. 
    • Hey lads just finished tidying up a gtr a bought. Originally from Sydney now living in New Zealand 
    • Hi Guys, Looking for this piece if anyone can help out.   https://tfaspeed.com/products/nissan-skyline-r33-gtr-rear-trunk-finsher-panel
    • How did you go with your problem? End up fixing it. Have a y34 aswell vq30det
    • But if I smoke test 5th cylinder it’s all ok, no leaks  when I try with 2nd it’s leaking exhaust and intake, it doesn’t come from oil dip stick.    so maybe when car was running poorly, rich or sth. Spark plugs were black and covered in charcoal or sth lookalike. could potential contamination make valves not seal properly? is there also a possibility that rb’s don’t have equal performing cooling passages  meaning back of the engine will be hotter than front. Can this cause improper wear if engine was running under load for short time? Or carbon build up could just burnt from 4-6 and is still on 1-3?   I out of my head like really. Timing is as manual crank-exhaust 47, exhaust-intake 38 at this point I thinking about give it a try and make another 500-1000km and check if anything change, if not I will most likely disassemble engine head /or whole engine and send it back to rebuild. It’s killing me     
×
×
  • Create New...