Jump to content
SAU Community

R34 Gtt Gearbox Rattle

azathoth
 Share

Recommended Posts

azathoth Proficient

azathoth

Posted
Posted

Hey people,

Hoping someone can help me out.

When starting up my car I have noticed a rattle coming from the gearbox.

It is a bit of a weird description but it sounds kind of like a paper clip or a small coin in the dryer.

After it warms up it gets a lot quieter but is still there. It is not the input shaft bearing as the noise is there all the time regardless of when the clutch is in or out.

I have never heard it from inside the car though, you can only really hear it from outside.

Also at really slow speeds like driving around car parks and pulling out of the drive way letting the clutch out there seems to be a whining grind but it is not all the time.

I know the clutch is pretty heavy duty however I am not sure what it is as the guy I bought the car off told me he couldn't remember what it was but he paid around 2500 to have it put in and it is very heavy.

I have no problems with gear shifts and it never slips.

If anyone had some ideas about what it could be I would appreciate it.

Cheers,

Andy

Link to comment
https://www.sau.com.au/forums/topic/406158-r34-gtt-gearbox-rattle/
Share on other sites
ahhbee Community Regular

ahhbee

Posted
Posted

The thrust bearing is the one that changes sound with the clutch in or out. I myself have a similar noise from the gearbox, but ive got a damaged second gear syncro and the input shaft bearing is going.Take it to a specialist if your worried by the noise, they should pick up what it is. Otherwise leave it, if you drive it sedately it may not get any worse, or if like me you drive it hard you may worsen it, 8 months on im pulling my box back out to get it rebuilt. Goodluck

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      R32 gtr hood latch support/lock part number search

      By joshuaho96 · Posted

      65601-05U00 is the hood latch. 62550-08U31 is the support that holds it to the radiator core support. They are all super discontinued so I don't really have any great leads on how to source this stuff.
    • Watermouse
      Stock rb25det neo questions

      By Watermouse · Posted

      GTSBoy on your suggestion on another thread I had a look at those injectors and ended up getting them because of the quality.  Got the expensive ones.  
    • PranK
      Happy New Year!

      By PranK · Posted

      Happy new year!
    • eli995
      R32 gtr hood latch support/lock part number search

      By eli995 · Posted

      Hey guys been looking everywhere to try and find the correct gtr hood latch support part number but only found the first half and when I search with that number it sends me to an r34. The first part I found was 62515. If anyone could help me with the rest then I’d really appreciate it. Or if there’s some alternative hood latch support that would work even better cause I can’t find any for sale. (Searched on upgarage, partsouq,buyee,rhdjapan) 
    • GTSBoy
      Stock rb25det neo questions

      By GTSBoy · Posted

      If you've only done the upper control arms on the rear, AND you have changed their length (by more than about 1mm) to set the camber you want, then you will definitely need/want to install traction arms also. Adjusting the camber arms on their own WILL introduce bump steer and make the car unpleasant to drive. Most owners have no idea that their car could behave infinitely better than what they put up with. I'm not entirely sure what the Stageas need, but I am thinking that unless you have massive front spring rates and pretty soft rear springs, you have waaaay too much rear bar. Oversteer city, in my estimation. Combined with possible excessive bump steer from maladjusted arms, that could be a recipe for nastiness. ATR43SS2 is not a highflow. It is an outright replacement turbo. It's a little bit bigger than the largest highflow profile that Tao does. Probably a solid 300rwkW turbo where the bigger highflows will be about 30-40rwkW less. Nevertheless, we're only talking about ~300 rwkW, which is well within the abilities of the stock ECu to run with a Nistune on board. I would do so without hesitation - and I will be doing so when I get my finger out and actually get the injectors and AFM installed. But, if you would prefer to drop a whole lot more money on the ECU side, then I suspect you're looking at Haltech. The Haltech fanbois here will all spout on about all the available engine protection you can have, that you can't have with the Nistune option. And they're right. But it doesn't really come for free either. You will spend more money on extra sensors and the like, plus the work to install them. If the engine was built and therefore represented a big investment to protect, then I'd say definitely do it. If you view the current (and forever into the future) shortage of replacement engines as something to prompt similar protection, then also, do it. If you see a destroyed RB25 as an opportunity to put in a Mercedes or other V12 (like I kinda do)... then your perception of the risk/reward might differ. These are good injectors. You can also get a "better" set of the same with more flow matching, for more $$. 1000cc is where you will want to be. You will need an R35 AFM and adapter tube if you want to stay with Nistuned stock ECU. Otherwise, if going Haltech, you can ignore. As for intercooler. Just about anything will do. You're only talking about ~300rwkW. Just put a big core in there. Be aware that return flows do add significant pressure drop and will cost power and will make the turbo work harder to achieve the same goals. If you can manage a proper crossflow, do it. I'm keeping my very good return flow because I'm only expecting to be in the ~250rwkW range, and will live with whatever outcome I get.
×
×
  • Create New...