Jump to content
SAU Community

Recommended Posts

So I've been told that Supra's drink petrol like its water.

Well I can give you the exact answer your looking for.

I get a good 425KM running on a full tank of Premium 98 before the empty light comes on. I believe it could do at least 450KM before I start running on fumes, but I tend not to risk it, although I do plan to run completely dry until my 34 becomes dehydrated to the point the engine shuts off just to see the MAXIMUM it can do on a full tank.

Gotta get myself a Jerry can first.

But to answer your question, 425KM on full tank of 98. Auto R34 25GT with RB25DE, no mods. Costs me about $140 a week though to run, since it's my daily and I drive it to city and back most days.

you should have roughly 10L of fuel left in the tank once the light comes on. in the case of my commodore though, i drove from gympie to noosa (just over 60kms) with the light on and then filled up to find i still had about 10L left in the tank. in the pulsar though, the light comes on fully with about 8L to go, but starts coming on then going off at about 11L to go.

back on topic though, if you want something RWD with better fuel economy than a skyline or supra, then get a silvia. the SR20 is a more fuel effecient motor.

Don't know if your being sarcastic or not :unsure:

But if legit question, you don't have a fuel warning light on your cluster?

not being sarcastic, looking back now the post does sound very dumb.

I actually dont have one, looked real hard at the dash too. I managed to run my tank almost empty to see if anything lights up.

I've heard of other skylines being like this, but im not concerned with it so never bothered looking it up.

I was under the idea that the na models, being the cheaper ones, nissan might have skipped over that.

mines an auto n/a and i get around 400-450kms out of a tank of 95 mixed highway and town, good weeks i can push 500 before running on fumes, mostly highway .... but if you put your foot down it can easily only do 300-350 flogged around town ....

not being sarcastic, looking back now the post does sound very dumb.

I actually dont have one, looked real hard at the dash too. I managed to run my tank almost empty to see if anything lights up.

I've heard of other skylines being like this, but im not concerned with it so never bothered looking it up.

I was under the idea that the na models, being the cheaper ones, nissan might have skipped over that.

My 34 is NA. maybe a pre-R34 thing? or perhaps your LED blew out.

not being sarcastic, looking back now the post does sound very dumb.

I actually dont have one, looked real hard at the dash too. I managed to run my tank almost empty to see if anything lights up.

I've heard of other skylines being like this, but im not concerned with it so never bothered looking it up.

I was under the idea that the na models, being the cheaper ones, nissan might have skipped over that.

they certainly have one. all modern cars do. there would probably be some sort of regulation that requires it.

it may be that the bulb is blown or the sensor in the tank is faulty.

i'm trying to remember where it is in the r33. i have a feeling it may be in the same cirlce as the fuel gauge, rather than being a seperate light like the handbrake light, etc. but if someone has a cluster handy, they could just remove the bulbs at the back and shine a torch through and you would see what each bulb does when you look at it from the front

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There's more than one way to skin that cat, and most of the sump Maatouks have done will be GTR sumps. They are HUGE in GTR drag racing here.
    • Yeah...I always start at the shift solenoids, because there's only a few reasons these will spook into limp mode, and bad shift solenoids is one ~ the other can be the shift control module (if you have steering wheel shift buttons)...it's easier to eliminate the solenoids first.
    • Might piggy back off this thread since there's been a good discussion about PWM.   I purchased a Walbro 460 F90000267 and have been looking into PWM to understand it. It was purchased more of a future proof as my original OEM fuel pump died (r33 below 200kw) and figured I'd just upgrade it to this. That's when it hit me that a pump this big can cause more dramas with such high amperage draw and heating of the fuel pump being on 100% all the time in such a mild setup.   I have a Nexus R3 and slowly collecting power mods but I was looking into the PWM feature on the NSP software:   Then looking at the graph from the fuel pump:     Am I safe to assume reducing duty cycle to 50% for example would make the pump run like a 230/lph ? Where does the PWM come in all of this ?   I've gone down the rabbit hole of PWM fuel pumps and it seems there are many differing opinions on how to go about it 😅  
    • Thank you, this will keep me busy for a bit.  I will update progression.
    • That specific one would be an exchange part, meaning I'd have to send mine to them. Plus it looks like a non AWD sump, which won't work for me. There is one or two shops in my country that I can ask to do a sump extension job and it'd most likely end up being cheaper than sending mine to AUS or NZ and getting one back, and quicker too.
×
×
  • Create New...