Jump to content
SAU Community

Recommended Posts

So I've been told that Supra's drink petrol like its water.

Well I can give you the exact answer your looking for.

I get a good 425KM running on a full tank of Premium 98 before the empty light comes on. I believe it could do at least 450KM before I start running on fumes, but I tend not to risk it, although I do plan to run completely dry until my 34 becomes dehydrated to the point the engine shuts off just to see the MAXIMUM it can do on a full tank.

Gotta get myself a Jerry can first.

But to answer your question, 425KM on full tank of 98. Auto R34 25GT with RB25DE, no mods. Costs me about $140 a week though to run, since it's my daily and I drive it to city and back most days.

you should have roughly 10L of fuel left in the tank once the light comes on. in the case of my commodore though, i drove from gympie to noosa (just over 60kms) with the light on and then filled up to find i still had about 10L left in the tank. in the pulsar though, the light comes on fully with about 8L to go, but starts coming on then going off at about 11L to go.

back on topic though, if you want something RWD with better fuel economy than a skyline or supra, then get a silvia. the SR20 is a more fuel effecient motor.

Don't know if your being sarcastic or not :unsure:

But if legit question, you don't have a fuel warning light on your cluster?

not being sarcastic, looking back now the post does sound very dumb.

I actually dont have one, looked real hard at the dash too. I managed to run my tank almost empty to see if anything lights up.

I've heard of other skylines being like this, but im not concerned with it so never bothered looking it up.

I was under the idea that the na models, being the cheaper ones, nissan might have skipped over that.

mines an auto n/a and i get around 400-450kms out of a tank of 95 mixed highway and town, good weeks i can push 500 before running on fumes, mostly highway .... but if you put your foot down it can easily only do 300-350 flogged around town ....

not being sarcastic, looking back now the post does sound very dumb.

I actually dont have one, looked real hard at the dash too. I managed to run my tank almost empty to see if anything lights up.

I've heard of other skylines being like this, but im not concerned with it so never bothered looking it up.

I was under the idea that the na models, being the cheaper ones, nissan might have skipped over that.

My 34 is NA. maybe a pre-R34 thing? or perhaps your LED blew out.

not being sarcastic, looking back now the post does sound very dumb.

I actually dont have one, looked real hard at the dash too. I managed to run my tank almost empty to see if anything lights up.

I've heard of other skylines being like this, but im not concerned with it so never bothered looking it up.

I was under the idea that the na models, being the cheaper ones, nissan might have skipped over that.

they certainly have one. all modern cars do. there would probably be some sort of regulation that requires it.

it may be that the bulb is blown or the sensor in the tank is faulty.

i'm trying to remember where it is in the r33. i have a feeling it may be in the same cirlce as the fuel gauge, rather than being a seperate light like the handbrake light, etc. but if someone has a cluster handy, they could just remove the bulbs at the back and shine a torch through and you would see what each bulb does when you look at it from the front

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for the reply @GTSBoy this is is a hydraulic lifter engine. Yea right i did not realise the lifters were supposed to be compressible while installed. I could push them down but i had to lean almost my while body weight on them.  I have never heard of a lifter/ lifters ticking only at hot idle and getting worse the hotter it gets. I have owned a few jdm cars with noisy lifters. This noise is slightly more subtle, it is more of a sharp gentle metalic tic than the solid and more loud tapping I've heard on lifters. I have used a metal rod, alloy tube, hose and stethoscope and could not find the source of the tick. But it appears to be loudest on the actual engine block behind the exhaust cam gear and next to the oil filter. I had mate (40 year old mechanic) go over it with me and he couldn't find it either..  Could it be a cam seal issue of some sort?  Cheers  
    • This seems problematic and unlikely at the same time. Vanilla RB2Xs have hydraulic lifters. They do have "zero" clearance, but only when running with oil pressure inside them. When not running, you should be able to compress them and obtain heaps of clearance. RB26s and Neos have solid lifters. They should have ~0.3mm and ~0.5mm on the inlet and exhaust respectively. If they have zero clearance then bad things are happening. With nothing else being wrong, it would mean that the valves would be held slightly (ever so slightly) open when they are supposed to be closed and it should have all sorts of problems when running, caused by leakage in/out through the valves. Or, zero clearance can indicate severe valve seat recession. None of it is good. Have you used a piece of hose as a stethoscope to try to localise the noise?  
    • Sorry for reviving an old post, but I'm having the same hot idle tick issue. Did anyone ever find out what it was?  I have checked/ replaced Injectors Coils checked Lifter clerance (is at zero) Checked Cam lobes Replaced exhaust gasket and studs Would appreciate any advice this is driving me nuts  
    • There's a huge reason manufacturers are tuning in dead flat torque curves... Make them reliable (and more drive able)
    • What HVAC actuator is under the steering wheel? Do you mean on the RHS of the centre console, immediately to the left of your shin? If so, then yes, it is probably that one, because that is the mode door actuator, and from what I know, it's still a pain in the arse to replace. I don't know about whole dash out, but you certainly have to rip into the centre console section. I don't know if it's covered in the workshop manual, as I haven't spent much time looking at those parts of it. (and by "the workshop manual, I mean the R32 GTR one, which is the most comprehensive one we have, and it should be similar enough between that and later cars to serve as a guide).
×
×
  • Create New...