Jump to content
SAU Community

Will A Series 2 Front Bar Fit On A 1.5 Front End

Daveg
 Share

Recommended Posts

Daveg Apprentice

Daveg

Posted
Posted (edited)

I'm only a newish member, and not sure of the answer to this, so thought would ask here. Is there any difference between the S1 and S2 front bar to fit on the front end of a 1.5 Skyline. I really hate the look of the s1 stock bars, and want to ditch my fibreglass 400R that was on the car when I bought it.

Edit: For an R33 GT-ST 1995 model. Series 1.5

Edited by Daveg
DarkRyda Proficient

DarkRyda

Posted
Posted (edited)

Yes there is a difference the S2 front guards, bonnet, headlights, grille are all different. You can fit a S2 front bar on a S1 but i don't recommend it as the bumper will not sit properly and look out of place mainly due to the headlights, guards and reinforcement bar.

This thread might be of help http://www.skylinesa...-2-differences/

Edited by DarkRyda
mad082 Grand Master

mad082

Posted
Posted

as above, there isn't really any difference between the physical mounting of the bars (reinforcment bars are a bit different though). so they can be swapped across easily, but also as said above, due to the difference in headlights, etc, they don't fit up quite right.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • r32-25t
      R32 GTR clutch master cylinder adapters

      By r32-25t · Posted

      I’ve got one on mine and it’s fine, 
    • GTSBoy
      R32 GTR clutch master cylinder adapters

      By GTSBoy · Posted

      No, you don't want to plug the vacuum line, as that will turn that side of the booster into an air spring and probably make it feel worse. I'm not saying that the GTR master itself doesn't need a booster. I haven't paid attention to the GTR one to know what size it is cf the non-GTR ones. But when you think about it - they have to do the same job, which is to move a little slave piston a few mm to do what it is supposed to do, and that final action is the same on all the cars. So, it is very unlikely that the GTR MC is any different than the others, because it has the same pedal stroke and the same output requirement. The booster just makes it feel easier. I'd suggest you probably have an actual hydraulic problem. It's totally common on these old shitboxes.
    • Kinkstaah
      R34 GT > GTT compatibilities

      By Kinkstaah · Posted

      Ye, in terms of bolting up the "Conversion" from a GT to a GTT is effectively "Use GTT parts for everything" Except the subframe itself, because you won't want a HICAS/4WS subframe. Remember your ABS system will be different too, thanks to GT being the S15 3 sensor system, instead of the R34 4 sensor system for wheel speed. I do not know how people get this to work given R34 diffs do not have a provision for an ABS sensor (they are on the tone wheels of the axles). I assume***** people use S15 gear/R34NA forever when they realize this - Or they convert it to a rear diff/axles that are R33 style which I presume has the singular speed sensor on the diff itself, but then you have to wire it all in and...and... and...
    • GTSBoy
      MLR's Bogan cruise ship

      By GTSBoy · Posted

      Foreshadowing was never so easy.
    • GTSBoy
      Rear hub bolt torque r34

      By GTSBoy · Posted

      The ones in brackets are the first stages of tightening. I usually aim for the middle of the range. They give a range because it's actually not that critical to hit exactly the right bolt tension. Enough is enough, and too much is too much, and the range given is inside that range. Half of the bolts in the suspension are problematic for putting a torque wrench on anyway, so just get done up to mechanic tight  and spanner checked a week later.
×
×
  • Create New...