Jump to content
SAU Community

Recommended Posts

Basically parting out most of my silvia track car and going in a new direction. This set up made a reliable 255kw atw all day every day, never had an engine problem. Engine has travelled very few kms since i pulled it from a front cut in 2009 maybe 6 - 10 events a year. Has been tuned by chea at powertune and jim at croydon racing developments and both said that it tuned like a fresh motor. Was tuned for response opposed to top end power. Slightly negotiable on items if sold as a whole package. other wise not negotiable.

ring or sms me on 0418772525, dont check the forums much

93 redtop sr20det 85,000 kms

-copy greddy inlet manifold

-BC 264 in & ex cams

-BC valve springs

-BC titanium retainers

-Moroso aluminium sump

-nismo thermostat

-speedflow dash fittings fitted to rocker covers

-alloy pulley kit

-Greddy oil cap

-oil relocator block

$1500

DSC_1606-1.jpg

IMG_1516.jpg

Haltech e11v2 with patch loom to suit red top sr20det

-currently has tune to suit this package on it

-air temp sensor

-3 bar map sensor

$1100

Splitfire coil packs to suit redtop sr20

$350

IMG_1523.jpg

Sard fuel rail with sard green 800cc injectors

$500

IMG_1524.jpg

Motorsport connections catch can setup to suit

-speedflow fittings

-push on hose and heat shielding

-drains to sump

$180

Trust Td06 20g kit

-td0620g turbo

-genuine braced greddy high mount manifold

-genuine trust 50mm external gate and screamer

-oil lines to suit

-braided vacuum lines

-best turbo for sr20s bar none

$2000

IMG_1517.jpg

IMG_1518.jpg

OS Giken twin plate clutch r2cd

-awesome clutch

-good condition

-never slipped

-never had any problems

$1500

Z32 gearbox conversion

-1 manual z32 gearbox

-Thicker sr20 auto bell housing cut and shut by Stewart Wilkins motorsports

-gearbox mount to suit s13

-shifter mount shortened so it pops up in the standard position

-gearbox is a bit notchy into third, apparently pretty common with z32s

-$900

IMG_1511.jpg

IMG_1510.jpg

Can do all of the above items in a package deal for $7600

standard z32 gearbox

-had as spare and never used it

-been sitting in my shed for 2 years

-never used but selects gears by hand fine

$500

Gtir quad throttle bodies

-came off a wreck with 28000km's

-convert your sr to quads

$450

IMG_1494.jpg

IMG_1497.jpg

Standard sr intake manifold

-combine with above manifold to convert runners

$50

Rb25 NEO motor

-no manifolds

-comes with power steering pump

-alternator

-was going to use in a project but haven’t ended up using it

-came out of a rear ended low km r34

$1000

IMG_1530.jpg

IMG_1527.jpg

Blitz alloy GTR individual throttle body adapter plates to suit rb25

-convert GTR itb's to your rb25

-extremely rare

$550

IMG_1506.jpg

IMG_1507.jpg

GTR individual throttles

-everything from head to plenum

-great condition

-combine with plates above for awesome response on your rb25

$500

IMG_1502.jpg

IMG_1501.jpg

Rb25 NEO gearbox

-low kms

-comes with shifter

-best rb box available

$1350

full 7 pointsafetyl 21 bolt in cage to suit sunroof s13

-comes with bolts and plates

-side intrusion bars

$670

3 greddy gauges

- water temp

- boost

-exhaust temp

$250

3 sabre gauges

-fuel pressure

-oil pressure

-oil temp

$100

hey mate, i am pretty sure they are sold. Waiting to confirm this saturday. I havent fitted them before.They dont make these anymore and i have only ever seen one other set for sale in Australia........ there the business and they are also on ebay at the moemnt

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I much prefer that to an actual oil pressure issue, never would of thought it would of been a volt drop issue but SAU brains win again. Guess ill be turning down the oil pressure limit for the track and hunting some grounds. Ill hopefully update this thread with some high oil pressure and solid ecu voltage logs. 
    • You've just discovered a really good reason to tell yourself, yes, I do need to buy an aftermarket ECU. Put the MAF in the bin. Slap in the new ECU and have a think about what turbo sounds you prefer.  Do you want a 90's style BOV wooosh? Do you want a hektik tsututututu?  Mate, can't go wrong. Just gotta get that ECU and the world is your oyster. 
    • Hi. Iam just curisou about this topic. I saw this video. It is about Greddy Type FV2. I know that BoVs are about that sound but how and when to use it? I read some topic here and from what i have understand on stock RB with MAF there will be some "problems" if you use this BoV? It vents the air in to the atmosphere and the MAF on stock car needs this air back in to the intake and not out? Or is it wrong? If so...i saw you can put some adaptor to circule air back...but does that not "loose" that sound? I saw another BoV from Turbosmart and it has two "exhaust" like ports? One is for the stock tubing for letting air back and one is for "sound" and let the air in the atmosphere? Can someone please explain? This is the Greddy one:  And this is the Turbosmart.     THANK YOU!! EDIT: So i read about this topic some more and i if i understand that correctly: That Greddy can function either like BoV or 100% Bypass valve? And that Turbosmart is what they called hybrid so you can adjust what and how many air can be vented out or back in? Is this right? THX!
    • That dirty voltage drop is the culprit I suspect 
    • i cant get them all in 1 screenshot unfortunately as i just dont know how to move things around tbh, but they are all from the same log and the line crosses at the same point for all of them
×
×
  • Create New...