Jump to content
SAU Community

Recommended Posts

So I've gotten this $291 fine and lost 3 demerit points for failing to stop at a stop sign.

I was pretty surprised when the officer pulled me over and said that, considering I had put my car in first and that gear locks up until you stop.

Can anyone on here give me any advice about disputing fines? I keep hearing not too, but I think this $291 fine is pretty ridic. I've seen speeding fines that were less.

I had no idea what this officer was on about, he seemed to be under the impression I wasn't paying attention to driving and started mocking me about drugs and alcohol and then went on about how road safety is important, which made me want to drive into a wall since I always pay attention.

Link to comment
https://www.sau.com.au/forums/topic/406790-fine-advice/
Share on other sites

Won't even bother fighting it, guess I'll just have to pay up.

The really annoying thing is for me to get into forensics I have to have a clean record for 3 years.

I might have to start walking everywhere.

that couldn't possibly include minor traffic infringements...

Link to comment
https://www.sau.com.au/forums/topic/406790-fine-advice/#findComment-6488197
Share on other sites

Spoke to some of the other students today who are in my class, they seem to know all the real world stuff better. I was told that anyone trying to get into the police force has to have a spotless record and that applies for the lab rats as well. I'll have to swing it by my teachers about minor infringements, but I was told speeding fines weren't allowed and one of the girls has one which shes bummed about.

Link to comment
https://www.sau.com.au/forums/topic/406790-fine-advice/#findComment-6488210
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • They see me rollin' they hatin'....... Took me most of the day to make the necessary mods to the mounts to make them fit the car.  Fortunately I was able to just use the mounts that came with the rotisserie. The rear ones are really secure, the front I feel i might reinforce a bit more as it doesn't seem like enough attachment to the vehicle. I'm sure it's fine but better to be safe than (extremely...) sorry.  I drilled and tapped thread into additional M12 holes to each car mount where it attaches to the rotisserie as an extra fail-safe. Without them the side to side movement is just restricted by the allen head pinch bolts, nothing actually goes though the beam. Does now! I still need to adjust the rotisserie to get the car centred in terms of centre of gravity. If it's too high or too low relative to the rotational centre line of the car, it will be like a turtle and roll onto its back or as it currently sits, I dont think I'd be able to rotate it as it sits as it needs to lift the whole car up as it rotates. Ain't happening... I'm going to be nervous as hell the first time I go to spin it on its side...    
    • Oh yes done this when the window started flopping around.  Turns out the guides that run along the rail chanel had crumbed way. Took off the door card and pulled out the window mech, then the window, which you have to pull out through the top. As said unbolt the guide rail and don't spend 30 minutes getting frustrated trying to find a way to slide it out upwards cause that don't frigging work. Drop it down and out through the door hole. All I did to repair it was slice some 10mm clear plastic tube, vertically, then screw it to the guide rail both sides. This tubing rolls inward on both sides and leaves a gap wide enough to hold the window. To finish all I did was lube the plastic tube with olive oil and Bob's your uncle . . . well if he has the operation he can be your Aunt ! !  10 bucks in plastic tube and another 5 minute job done again . . . . YEH BULLSH#T ! My love for Skylines knows no bounds !
    • So was there a solution to this problem? I’m having this issue now. 
    • not expensive, just irreplaceable if you don't go sub 60 at wakie in that thing people will start talking
    • I haven't replaced that, but I have had the doors apart on the r32 a couple of times The door skin will be held on by a combination of clips and bolts, just take it slowly and make sure all the sneaky hidden bolts are out Once the skin is off you should be able to pop that piece off pretty easily, looks like there are only 2 bolts holding it on
×
×
  • Create New...