Drivers Door Won't Lock From The Inside

[Spicymouse]

Hey, I've got my newly bought R33 gtst and i fitted a central locking kit so i could be a tad lazy. So now i have two problems one.. when i drive over 20 km/h the passengers door auto locks its self. Two if i lock the drivers door from the inside i can still lift the handle on the outside and unlock the door. any ideas? i can lock it with the key fine, just using the remote it won't lock.

[BigBoyDan]

1. Standard feature on some of the aftermarket kits. Fing annoying

2. From what I can understand its a dodgy install

[Spicymouse]

yeah thought that, it did that before i put the kit in though.. also it wouldn't lock from the inside before the kit..

Edited August 12, 2012 by Spicymouse

[cree]

The first issue should be able to be turned off. Have a read through the instructions. The second problem sounds like something has gone wrong with the install.

[Chris Rogers]

I realize you have already bought the kit BUT a N15 Pulsar catch assembly BOLTS straight in and gives you a FACTORY actuator that will not cause the issues you are having.

the speed locking in a std feature in the early 33's

[Spicymouse]

i don't think its a dodgy install, as i've done plenty before. i'll take some photos later to show you where it is. and n15 catch you say? got any more information for me? also some where to get one?

[Chris Rogers]

wrecker in your area should be able to help.

[Spicymouse]

had a look and no wreckers in my area have any skylines =(

[Chris Rogers]

you do NOT need a skyline catch. the pulsar n15 is the SAME catch. it will BOLT in.

[Spicymouse]

i had no luck finding any parts for skylines or pulsars at the wreckers i tried so i got a skyline catch from eBay. fixed my problem!

[Chris Rogers]

fair enough. N15s are a dime a dozen here in brissy.

[Bergo]

Sorry to bring up an old topic but I have had a few problems with my locking on the drivers side of my s1 33. I got a pulsar actuator and latch from eBay but it has a different plug to the skyline actuator so I had to go to a wreckers to source an n15 plug. Just making sure that If I cuttheold plug and solder the new one on I shouldn't have any troubles? The r33 actuator part is seized I think so I can still use the catch part from it.

[Chris Rogers]

bring the car past the shop. easier than trying to explain it..

[Bergo]

I might pop in and say hi tomorrow morning if your going to be at the shop? I got the door fixed up but have a few other things to ask you about and need to drop that smic off anyway so might aswell

[Chris Rogers]

no issue. was a bit late in this morn. here all day though.