Jump to content
SAU Community

Recommended Posts

I tend to leave from Northcote at 5:45am, though I don't stop on the way. Note I don't go through Cranbourne either - I head towards Pakenham on the Freeway and cut down Koo Wee Rup Road.

Went down to Chasers to have the engine checked out, don't know if the other garage's instrument read low last time but compression was again even but up at around 160 per cylinder, leak down test was also very good. Looks like I can continue to target my money at the rear suspension and possibly Paul Ruzic EM Pro to provide engine monitoring to keep it so - currently just have standard dash.

  • Replies 49
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

good news on the comp test, just keep it cool and fill it with fresh oil frequently and bobs your uncle!

i'd love to throw some money at the rear end in my car, it's a constant struggle trying to keep it straight.

have fun at the island!

putting 300kw through my stock rear end was a nightmare at Sandown I just couldnt get on it anywhere but the straights, even then it was point and shoot but dont pull the trigger to hard

...wasnt too bad at PI though, just drove like a normal car but faster,only on the tight tight handers it wanted to step out :D

  On 30/08/2012 at 1:27 AM, ssxRicho said:

1.5Way KAAZ or NISMO diff is a must. it's $1500 worth of kit, but money well spent.

This is what Birds was telling me.

How much of a difference did you notice? Just traction out of corners or....?

Yeah diff and brakes is the last big spend I have really..It will have to wait though so in the meantime I will just cruise around and learn the road..

And swaybars..mind of I ask what sizes you run John or is it secret squirrel business..

Adjustable Whiteline Front, there is only one size 24mm.

Fixed Whitline Rear, 20mm.

The diff changes the way the car behaves, not only under power but off power into corners. It's less sloppy and more direct, the change on the road is equally as good. Rob in the black 33 just changed from the stock diff to a KAAZ 1.5 way recently.

GTR is different. The GTR rear subframe is different so is the front (obvious reasons there, front diff)

27mm for the front of the ECR33 is fixed mate. That would be terrible, unless you like massive understeer all the time.

  On 28/08/2012 at 11:24 PM, scotty nm35 said:

My entry was confirmed by email yesterday too, as scrutiny opens at 7:30 I guess we would need to be there around that time, especially with up to 140 entrants.

I will be meeting other drivers at McDonalds Cranbourne at 6am if you want to get a quick bite and head down with us.

cool, i'll try to make it by then however i'll probably be running late and miss you guys.

What a gorgeous day, looking forward to tomorrow. Where are you planning to park up, if early, close to cafe or at far end of garages near the garage used as the entrance to pit lane?

^^ Was pushed up beside the scrutineering shed, didn't look good.

Pretty happy with my new PB of 1:56, not bad for a 2 ton car I thought. lol.

My gearbox let me down again, perhaps time for a manual conversion?

post-63525-0-05824600-1346638290_thumb.jpg

Guest
This topic is now closed to further replies.



  • Latest Posts

    • I'm a fan of the JZX110, and the Aristo. Big cruiser cars, and with the factory cars, super comfortable and feel like you're driving an armchair! And the JZ motors are a pretty nice engine too, especially with some basic mods.   The import process, and the need to be able to trust people, and the fact there's so many scammers around is what ever puts me off wanting to go through that ordeal!
    • I don't care for these at all, but at least the underside looks straight and not rusty. A good basis for a long life. Many cars from Japan have been lifted with forklifts and f**ked almost irrepairably.
    • Yes, but it's not dumb or dodgy. You can build a perfectly good boost controller from a pressure reg, a relief valve (looks same same as a reg if all from Norgren or SMC, for example) and a check valve. I ran one for years. Only superceded with  EBC because I could get one for cheaps and wanted finer control.   THis mod is certainly not a sketchy boost mod, provided the boost is kept below the "spin to death" threshold of the turbos.
    • With ordering the belt, you're doing water pump and the idler and tensioner at the same time too yes?
    • This is just a dumb way of keeping the wastegate closed to make more boost. Undo it and either follow the factory setup or redo it properly. Manual boost controllers just use a spring preload to determine when to close in response to boost pressure so it no longer vents to atmosphere.
×
×
  • Create New...