Jump to content
SAU Community

Recommended Posts

Brendans got a shit load of machining and hand work in front of him now.

Its in good hands from here on......

Indeed, He looked very comfortable and calm so i have no doubt that will he do an amazing job as per usual.

  • 1 month later...

LOL, nice.

Dont forget to hand it to Brendan so he can machine it and the RB30 block to make it fit, and re loctite all the phillips heads screws on the backing plate. :)

Hey Pete, i swung past Brendo's today he was already aware of the loctite stuff im assuming you passed on that knowledge to him.

Edited by Tyranus

Yeah, was in the shit i gave you to pass onto him, im more worried that he may have overlooked it between all the info so i thought id mention it for you to remind him.

From 2 new Tomie pumps ive had, both had 1 or 2 loose screws (not tightened like the others) and 2-3 screws without loctite from the factory.

Loose screws = coverplate leaks oil pressure......bye bye engine.....very important to check.

Edited by GTRPSI
  • Like 1
  • 1 month later...

Hey Sedat was going to call you the other day.

Have you seen this? PT7675 Gen 2 about to be released?

http://www.maperformance.com/precision-turbo-gen2-pt7675-cea-turbocharger.html

Note the list of new turbos on the bottom.

Told you to hold back and wait.......lots of new goodies being released. :)

  • Like 1

Hey Pete since we last spoke i was set on getting a 7675 gt42 but i deciced to wait.. listen to your elders as wogs always say and im glad that i did.

Ill be waiting for more info to become available on the pt2 7685.

Edited by Tyranus
  • Like 1

Yeah just kick it man, wait for the engine to be built, your other business priorities come first, till its ready who knows what the latest and results are going to be.

Was showing it to Stefan the other night as he is about to order some other stuff from the US for his S2000 and was going to order the turbo he wanted at the same time, now he says what you just said, leave it for last. (Finally he is listening)

And im currently working hard on convincing him NOT to go precision. (Long story, we will talk about it next time we catch up)

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Anyone want to make me an offer to take my v36/g37 3.7l manual coupe in full? Off memory it was low 100k km but the battery is flat so can't tell right now. What's wrong. I had engine problem's that led to a nice clunk. It made it home but it wasn't pretty for the last few kms. Happened under revs. Sounds like bottom end.. never got around to fully checking or fixing it so the car has sat still and unregistered for a few years. Minor bump in front end set the pedestrian protection under bonnet airbag off and that was meant to be repaired, but while waiting for the repair (parts to come) I got the engine problem. The rest of the car is in decent condition. All drive line is good. All interior is good. Leather interior. Wheels in good condition and decent tyres although the ps4s are likely a little too old now it's sat still. Colour of the car is pewter off memory, the dark grey colour. In Camden NSW. Would need a tray back pickup.
    • Anyone want to make me an offer to take my v36/g37 3.7l manual coupe in full? Off memory it was low 100k km but the battery is flat so can't tell right now. What's wrong. I had engine problem's that led to a nice clunk. It made it home but it wasn't pretty for the last few kms. Happened under revs. Sounds like bottom end.. never got around to fully checking or fixing it so the car has sat still and unregistered for a few years. Minor bump in front end set the pedestrian protection under bonnet airbag off and that was meant to be repaired, but while waiting for the repair (parts to come) I got the engine problem. The rest of the car is in decent condition. All drive line is good. All interior is good. Leather interior. Wheels in good condition and decent tyres although the ps4s are likely a little too old now it's sat still. Colour of the car is pewter off memory, the dark grey colour. In Camden NSW. Would need a tray back pickup.
    • I started with the above in my head too, and I might be reading / thinking about what they want wrong, which is why I complicated it a bit further. Purpose I'm seeing is for the corner indicator to be on with headlights, and then if the indicator turns on it can still flash. The relay part above I can see working as required, except in the case of headlight is on, and indicator is on. The change over relay you've wired in would get signal from the indicator, and as it flashes would give power to the globe from the indicator, but as it flashes off, power comes from the headlight, which would cause the indicator to be constantly on when headlight is on, even while indicator change over is flashing. That is unless we don't care if it flashes or not if the headlight is on? I guess that's an OP clarification.
    • HI, Ive got an r34 gtt sedan A/T. The instrument cluster went out and I replaced it with another A/T everything visually looks the same and all the gauges work now with the exception of the speedometer and odometer. The speedo will stay pinned at zero until I'm going about 55kmh and then it'll say Im going about 5kmh. my odometer seems to be tracking at about a 1/10 of what it should. If I go 1km it'll say I've only gone 0.01. Appreciate any and all help. Ive tried searching through the forums reddit and a local fb group. The only info I think I've found is that some cars didnt come equipped with TCS (mind is) and the clusters may be different between those? I've also installed a brand new VSS and no joy obviously. TIA. 
    • what speedo healer did you use?  
×
×
  • Create New...