Jump to content
SAU Community

Guard Rolling + Wheel Alignment

Manuel Kasko
 Share

Recommended Posts

Manuel Kasko Grand Master

Manuel Kasko

Posted
Posted

Hey guys

Going to be getting my new rims in the next few weeks and I need to get my guards rolled and a wheel balance and alignment done.

Anyone know of a cheap place that you have experienced.

Or if anyone knows how to roll the guards I am more then happy to pay you for helping do it.

Cheers

Kasko

Link to comment
https://www.sau.com.au/forums/topic/407293-guard-rolling-wheel-alignment/
Share on other sites
RS4-S Proficient

RS4-S

Posted
Posted (edited)

I work at jax fyshwick, we used to roll guards til our guard roller broke from over use. Then us like most shops stopped doing it because no matter how many times you tell people that most the time your paint will crack and or flake even when heated with a heat gun, they still want you to pay for a respray. You can buy a roller off eBay for about $100-$130 and do it yourself?

I am a full time wheel aligner and it'll cost ya $66 for a 4 wheel alignment at our shop.

Edited by RS4-S
bnpcustoms Contributor

bnpcustoms

Posted
Posted

We do guard rolling, and there is always a risk of cracking the paint or flaking at the seam of the guard where it tucks under when lipping the guard.

When rolling the guards out it becomes a bigger risk as you are stretching a wide area of the paint just above the lip and thats why most shops including us mention before work comences that there is a risk that it can crack/flake the paint when rolling/lipping even with a heat gun..

The reason shops mention the risk is to cover the shop if there are any cracks in the paint due to rolling the guards and the paint not being flexable.

We charge $50/guard to roll/lip we arent able to do wheel aligning yet.

Trozzle Grand Master

Trozzle

Posted
Posted

does that include cars with adjustable upper arms?

I'm with TiTAN here, are you able to do a full setup adjustment for me - ride height (lower), then fix camber and alignment? Theoretically all I need to do is lower it again to wherever it was before, then all the rest should be near on correct lol

RS4-S Proficient

RS4-S

Posted
Posted

Titan and Troy. The more adjustments you have, the better I can do my job. $66 would cover front and rear camber and toe etc and front caster if you have adjustable tension rods. Lowering a by means of winding down Coilovers would attract an additional fee. Il enquire pricing for this tomorrow of youre interested. If you have fully adjustable everything you can give me preferred specs otherwise I set it to factory/my specs. IF you give me some wack specs you found online with stupidly large cross camber and caster differences and your car pulls like a 12yr old boy, il just say I told you so.

Manuel Kasko Grand Master

Manuel Kasko

Posted
  • Author
Posted

When rolling the guards out it becomes a bigger risk as you are stretching a wide area of the paint just above the lip and thats why most shops including us mention before work comences that there is a risk that it can crack/flake the paint when rolling/lipping even with a heat gun..

I dont need any pumping of the guards etc.

Just a standard roll of the inside is what I think the guys in the wheel section were telling me.

Going to be lowering the car and fitting some 18x9.5 +22's with 235/40/18

The coilovers should give me the camber I need

Trozzle Grand Master

Trozzle

Posted
Posted

Titan and Troy. The more adjustments you have, the better I can do my job. $66 would cover front and rear camber and toe etc and front caster if you have adjustable tension rods. Lowering a by means of winding down Coilovers would attract an additional fee. Il enquire pricing for this tomorrow of youre interested. If you have fully adjustable everything you can give me preferred specs otherwise I set it to factory/my specs. IF you give me some wack specs you found online with stupidly large cross camber and caster differences and your car pulls like a 12yr old boy, il just say I told you so.

LOL gold.

Fair enough, I might just pull my finger out and lower it myself then bring it past if it still handles like a heap of shit :)

RS4-S Proficient

RS4-S

Posted
Posted

Lowering/raising vehicle with coilovers fitted will cost about an hours labour ($99). Make sure you adjust your Coilovers at the bottom and not the spring perch as you are just changing spring preload and reducing shock travel.

Trozzle Grand Master

Trozzle

Posted
Posted

Lowering/raising vehicle with coilovers fitted will cost about an hours labour ($99). Make sure you adjust your Coilovers at the bottom and not the spring perch as you are just changing spring preload and reducing shock travel.

Hehe yeah I know :P I raised them myself for the engineer's cert. I can do them myself, I just really couldn't be f**ked hahaha

GTRKat Grand Master

GTRKat

Posted
Posted

I dont need any pumping of the guards etc.

Just a standard roll of the inside is what I think the guys in the wheel section were telling me.

Going to be lowering the car and fitting some 18x9.5 +22's with 235/40/18

The coilovers should give me the camber I need

That standard roll can still crack and cause reasonable paint damage.

Trust me :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      I for one welcome Nissda.

      By Duncan · Posted

      Surely the merged entity will be called "Honda" given the relative company values. I've got to be honest, I don't understand how merging 2 companies that missed EVs (despite Nissan making the first mass produced one) will solve their problems
    • Murray_Calavera
      How "plug and play" is the Haltech Pro for R33 GTST

      By Murray_Calavera · Posted

      If you haven't bought the ECU yet, I would strongly consider buying a modern ECU. Yes it is very easy to setup and tune, however it is lacking many of the features of a modern ECU. The pro plug in is something like 10 or 12 years old now? Can't remember exactly but it is very dated now. In that time the Elite was released and now we have the Nexus platform.  I would strongly consider not buying the ECU that is 3 generations old now (especially as it isn't a cheap ECU!). 
    • r32-25t
      I for one welcome Nissda.

      By r32-25t · Posted

      Im happy for it as long as it means reanult gets the boot 
    • Murray_Calavera
      Steps to DIY sanding car back ready for respray....

      By Murray_Calavera · Posted

      Sorry I should have been more clear with the previous post.  The block is a sanding block - picture something like this https://motorguard.com/product/motor-guard-bgr161-bgr16-1-rigid-psa-sanding-block-2-5-8-x-16/ The guide coat is the paint It's two separate things I was talking about, there is no "block guide coat". 
    • Murray_Calavera
      Steps to DIY sanding car back ready for respray....

      By Murray_Calavera · Posted

      Maybe more accurately, you aren't just dulling the existing paint, you are giving the new paint something to 'grab on to'. By sanding the existing paint, you're creating a bunch of pores for the new paint to hook on to.  You can lay new paint over existing paint without sanding it, might last a year or two then sad times. The paint will peal/flake off in huge chunks. By sanding it, the new paint is able to hang onto it and won't flake off.  Depends on the primer you are using. When you buy your paint, as the paint supplier what grit of sand paper to use before you lay down the primer.  Use whatever you like as a guide coat. Pick a colour that really stands out in contrast to the paint. So say your sanding/painting a currently white car, using a black guide coat would work well. You very lightly lay the black guide coat down, then as you sand the car with the large block, all the high spots and low spots will stand out as the black paint is sanded off (or isn't sanded off).  When you buy your paint, hit up your supplier for recommendations for what paint to use for a guide coat if you're unsure what would work well with your setup. 
×
×
  • Create New...